How to Repair a Tear/Hole in Leather or Vinyl 

When you held it up to the camera, the repair didn't look like it had been filled enough yet.

The spray dye lines are great. Lol.

Thanks for sharing; I'm looking for a way to repair a crack in my mower seat. Do you think this will work well for that type of application?

So...I want to see this done on a car seat still in the car...

When its just about painting some peeling from vinyl on my car mat, any vinyl paint will do?

Surely you could have found a real cushion or seat with damage to show an actual repair. The piece of leather is much easier and more convenient, I'm sure, than a real world repair job.

would it not be better to sand the repair area down with some fine sandpaper before applying the dye?

Nice instruction but you could totally see the repaired area ….

Will this work on a pleather sofa?

Very good

So if its water soluble then can you clean the leather or vinyl after its repaired without it removing the filler or repaired parts

Hi, like the video and want to go for it on my two chairs. They are not real leather - faux, vinyl, whatever. If I get your kit, will it work on those other mediums? thanks... d

I have a vintage leather stressless recliner that a cat practically ruined.... with urine - in the back crack area. It’s got a good many cracks from drying out. Issue is- it’s pumpkin or burnt orange leather. How do we match that in a dye?

I need help on a corner leather seat in which my dog chewed off. There is a seam on it also how do I go about that?

seems like it would work better if you used two screws to align the piece in place.

How do you pick color needed

Any suggestions on how to remove boot scuff marks off of a vinyl motorcycle seat???

So if the screw trick won’t work, my leather is barely pealing from the foam. What can I do?

What about leather and vinyl that has a pattern in it? How do we recreate that wrinkled look? Also, it the torn edges of a vintage car's original seat cushion have become brittle and curled up, do we just cut that off? If not brittle do we leave the torn up bits in the center in place or cut that out? Thanks.

Looks good but I think I can get better results if I make my own paste. This is Totally unrelated but where can I get an industrial sized blender?

This is not a hole nor a tear and the vinyl is pretty different then leather! And what if it's attached to a seat or a cushion? Not really helpfull.

So everything you have mentioned is for leather but nothing for Vinyl. So will this work on vinyl?

How do I order the kit?

You repaired a slit. I need to repair something exactly like the picture.

Aren't you supposed to seal the dye/paint after you apply it? I'd it is water soluble and I repair my car seat with it, wouldn't it get rubbed off by sitting on it, especially if I get in after getting caught in the rain?

Crikeys! Where does one begin? For someone who’s a part of the business, your work is as sloppy and average as could be. Marking the centre of the patch with a small line and tucking it in with two pairs of tweezers avoids the silly screw, as the mark identifies the centre and correct direction it needs to run. Your example required you to grab the edge of the cloth and lift it to tuck it in. Something people don’t have the option of with a car seat etc. You also straightened the patch up from underneath! 🤭 You don’t need to explain that we can’t access the under side like you can, because we already actually know we’re not repairing a square piece of loose leather, but thanks for reinforcing that to those of us who may have forgotten. Your colour system of ‘car make and model’ is pretty useless where all colours of aged leather will have faded, and let’s face it, most leather that requires a repair is probably old. And what if it’s a leather lounge/ couch, reclining chair etc? No explanation for that problem to match the colour in this video. You slopped your filler all over the place, meaning you removed/ filled any existing texture of the leather around the repair, making all that area smoother than the rest of the leather. You didn’t close the gap up in the split properly. If your product ‘pulls the gap closed’ after you’ve patched it, then it will create tucking lines that will highlight the area of repair even more. It’s like holding a hairdryer near a plastic shopping bag and shrinking that little area. It then looks obvious. Best to completely close the split including glueing the internal edges of the thickness of leather. Thus, the split is almost invisible without requiring ‘filling’. OR, keeping your split clean but closed in the gluing process, then using your filler to glue the inside edges of the split if your filler is stronger than the glue. Either way, the split should be completely closed before the final coatings, meaning it doesn’t require actual filling. If your product actually ‘pulls the repair together as it dries and shrinks’, then why did it require 3 applications to fill the crack you’d left after gluing? 🤷‍♂️. All your product needs to do is blend 5-8mm around the outside of the split and over it. Then colour match with a brush or spray gun. ‘Dabbing’ with a giant sponge is never going to give the option of detailing the blend and feathering the colour🤦‍♂️.

PVA glue. Thats what i use for leather.

Repair Area

Please help me punjabi

Punjabi help me

I cannot color match what I need cuz u only have cat companies to match to

Lol 😆terrible repair

Way too much work.