How to repair earphones head jack at home step by step

Подписаться 55 тыс.

Просмотров 4,1 млн

50% 1

HOW TO REPAIR EARPHONES/HEADPHONES JACK AT HOME STEP BY STEP
-----------------------------------------------------------------------
BUYING LINK:
Heat shrink tube: amzn.to/3xgauiv
Soldering iron kit: amzn.to/3yKijyr
Soldering iron kit: amzn.to/3x9k8n3
Soldering paste: amzn.to/3lg16ce
------------------------------------------------------------------------
Hello friends, in this video I explained how to repair EARPHONES head jack step by step.
------------------------------------------------------------------------
PLEASE WATCH THIS VIDEO || PART-2
🔥how to repair earphones head jack at home :-
➡️ • Repair earphones head ...
------------------------------------------------------------------------
⚠️The way I cut has been misunderstood by many people. I absolutely agree with this and am sorry for this. But I did this work according to my experience and convenience. I do not recommend anyone to do this. You can use the cutter at your convenience.🙏🙏🙏
------------------------------------------------------------------------
⚠️ DISCLAIMER:-
whatever you are watching in this video should not be tried without proper experience. This video is not intended for children.
------------------------------------------------------------------------
DETAILS:-
🔹Red wire :- mic
🔹Copper wire :- ground (common)
🔹Blue wire :- right speaker
🔹Green wire :- left speaker
------------------------------------------------------------------------
Soldering Iron Kit :-
➡️ • Soldering Iron Kit || ...
------------------------------------------------------------------------
▪️▪️MORE VIDEOS ON EARPHONES ▪️▪️
convert HTC Earphones to Skullcandy :-
➡️ • How to make New earpho...
------------------------------------------------------------------------
#headjackrepair
#earphonesrepair
#earphonejack
------------------------------------------------------------------------
✔️Channel link:-
➡️ / kissanhomeengineering
✔️Facebook page:-
➡️ / kissanhomeengineering
------------------------------------------------------------------------
LIKE | | SHARE | | COMMENT | | SUBSCRIBE
Thanks for watching🙏

Хобби

Опубликовано:

15 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@KISSANHOMEENGINEERING 3 года назад

Red wire 👉 mic Copper wire 👉 ground (common) Blue wire 👉 right speaker Green wire 👉 left speaker ⚠️ The way I cut has been misunderstood by many people. I absolutely agree with this and am sorry for this. But I did this work according to my experience and convenience. I do not recommend anyone to do this. You can use the cutter at your convenience.🙏🙏🙏

@ssshivan 3 года назад

Bro my left one only not working

@KISSANHOMEENGINEERING 3 года назад

💯% wire me hi mistake hogi.

@ssshivan 3 года назад

Yes bro

@m.d.merajulhaque3592 3 года назад

Bro mera pin tut gya hai jo phone me lagate hai

@cristinelgiulian9104 3 года назад

³las fierbinti

@alenwolf5698 3 года назад

It is helpful when you had a costly earphones but can't afford to buy a new one again.tnq so much

@SAKURAI.. 3 года назад

Same

@sandhyasingh6183 3 года назад

Thanks For Encouraging Me To Buy A New Earphones 🙏🏻.

@vickyeahme6807 3 года назад

🤣🤣🤣

@malapandit8258 3 года назад

😂😂😂😂😂😂😂

@selamfikir3650 3 года назад

Try to use tools properly. No technical way of doing but not bad.

@rickyfreefire7545 3 года назад

Lol😂😂

@avounreleased6853 3 года назад

fr imma just get some new ones 😭😭

@mariusbogdan9036 3 года назад

Very clever! I do the same. I have been an electrical engineer for 42 years. Sure, if I have a new jack, I use it because it’s nicer, but it’s just as good!

@joshhayl7459 2 года назад

🟦 Oh GREAT!.... ANOTHER So-called "Technician" who doesn't know the proper technical terminology for what he's talk'n about,.... Whoever taught you should be sued for negligence!....It's NOT a JACK!.... It's PLUG'!!!....smh.

@rakibchy4621 3 года назад

😭😭😭😭😭 At last I could repair my headphones jack. Thank you 😭😭😭

@filker0 2 года назад

Many headphone cables have pressure-fitting for the conductors rather than using solder, and for those, it is often very difficult to solder to the concentric rings. In general, I will not try to repair using the original tip. Sometimes the wire colors are non-standard in molded cables, and often the wire is so fine that a chisel tip on a non-temperature controlled iron will simply melt away the insulation. I would have used flux paste after having cleaned the exposed wire, and tinned the leads while the cable end was in the jig. The best results I've had for this sort of thing is to get a replacement jack that is designed to be used with solder and has its own strain-relief and cover, and use thin heat-shrink around the connections and up the cable before screwing on the cap. Depending on how the cable is being used, additional heat-shrink around the assembly is not a bad idea (never tried that myself). If you don't have a good way to get a replacement jack but have some unusable device with an intact jack and at least several inches of cable is to splice the plug-end of the headphone cable to the salvaged plug and wire and use heat-shrink and glue to provide protection and strain-relief. (Note that ear-buds often have extremely difficult conductors, including what appears to be conductive polyester thread for at least 1 or 2 of them, and there is no way to get a good solder join by hand. If possible, I would cut off the old plug, put it in a vise, then carefully cut the over-mold to make sure I know what color of conductor was attached to each ring. Cutting the insulator with a utility knife while holding it in the palm of your hand is asking for trouble.

@ghufran9494 Год назад

Thanks, helpful info. This solidiring is really tough in case of wired earphones. How can I check which color wire to join on which ring without DMM ? I am asking cuz some have different arrangements at rings...(red - copper - blue - green) will it work on all jacks.?

@karlkammok8071 3 года назад

Very clever chap. Wish I had your knowledge. Thank you for sharing. Given me some ideas. I particularly like the tinning of the fine wires, they can be a real pain!

@kathycaressgabiane521 3 года назад

Did it work?

@karlkammok8071 3 года назад

@@kathycaressgabiane521 yes it did.

@kathycaressgabiane521 3 года назад

@@karlkammok8071 i will try it

@J.P.MistaPista 3 года назад

I'm a complete beginner and not very good at soldering, but you helped me a lot! Many thanks!

@jicegvs4662 2 года назад

@prashantdidla5280 3 года назад

thanks bro!! successfuly fixed mt earphone :)

@lokeshkmc2538 3 года назад

Please fix mine also

@sandynguyen1439 3 года назад

Saved a hundred bucks. Thank you for showing us this method!

@WiggyVideos13 3 года назад

First bit, blade comes out, next bit fingers covered with plasters :P Nice repair though :)

@mathme866 2 года назад

You are genius man...ma smjhti thi mera favourite handsfree gia to bs gia...koi repairing ni ho skti....lkn ab...kamal ho gia....I will try it soon....thank you brother

@paultsui6094 3 года назад

Good lesson, thank you!

@gerardogalizia 3 года назад

thanks bro ! successfully fixed my earphones.........

@rommelrodriguez14 2 года назад

thank you very much, repaired my lovely headset using this method. Subbed

@ramjiparmar8545 Год назад

आपका काम देख कर मेरे को बहुत अच्छा लगा आपका काम कमाल का काम किया यार मेहनत किया लेकिन काम कंपनी जैसा बना दिया है इन्होंने

@the.dakshsharma6310 3 года назад

It's working bro Thankyou

@moomingamer5555 3 года назад

Thanks Bro... It took very long for me but i am really thankfull to you! Actually my headphones were not giving me the left sound output. Now they are working very fine. Nice video!

@kamleshpingle3797 3 года назад

Great Work!!!

@kaito6467 2 года назад

The most useful thing I've seen in RU-vid

@edwardarendse2424 3 года назад

The heat shrinking tube is a very good idea.Thanks

@alexandrerodrigues8313 3 года назад

É melhor ele ir no camelô e comprar um novo

@robertthomas6127 3 года назад

It could also be repaired with Hot Wax, but one uses what one has.

@sharozkhan3179 3 года назад

You should use glue gun instead of shrink tube.

@PreetiKumari-yb8vq 3 года назад

really helpful video can u also how to repair earphone head part for trrs audio headphones

@tiyajain5292 3 года назад

Thanks for encouraging me to buy a new earphone

@Morunic777 2 года назад

I DID IT! YES FINALLY I BOUGHT A NEW EARPHONES.

@arameshreddy1959 4 года назад

nice bro abhi tak jitna video dekha tha apka ye repair or finishing work bahat acha laga

@KISSANHOMEENGINEERING 4 года назад

Thanks bro

@Russ_Russov 3 года назад

Not bad. To clean the wire from the varnish, I use a tablet of acetylsalicylic acid. You press the wire with a soldering iron to the tablet and after a couple of seconds the acid corrodes the varnish and the wire can be easily tinned. The main thing is not to inhale the smoke, otherwise a strong cough is guaranteed. At the end, the braid could be squeezed in a vice, then the seam would come together and you would not have to cut it before putting on the shrink. Translation using Yandex translator.

@mrmagoo6966 2 года назад

heat shrink goes on cable first, easier to slide it on that way with different sizes in order if you want to double up or put smaller one on cable end etc

@amir_2mi 2 года назад

Finally i found some good stuff to repair my aux cable, thanks

@Saaaeeda 3 года назад

thanks for informative video..i always break ear plugs one in a month...now i can repair them all...

@djosearth3618 3 года назад

try spinning some spring onto spot where your wire keeps breaking or reinforce with shrink tube or Bondic(R). Spring works great for me if you can find right kind of type & fit. Maybe even silicon caulking and or electrical tape somehow.. ;]

@porandlasushmasri3187 3 года назад

THANKS FOR ENCOURAGING TO BUY NEW ONE 🙏🙏😀😂😂😂

@mrkrashad9022 3 года назад

🤣

@dr.unstable5913 3 года назад

😂😂😂

@mohammedhariskhan2716 3 года назад

U just saved my 1500₹ thankx buddy ❤️❤️❤️

@beekeeys 2 года назад

systematically explained ....... 🙏....plus beautiful music.....

@heinzhandschin9155 3 года назад

The start with the knive is very dageres for your fingers, work always in the direction from the finger away . Thank you for your video, greatings from switzerland.

@KISSANHOMEENGINEERING 3 года назад

Will take care ahead

@AuralCraftProduction 3 года назад

Exactly my thought

@vivekyadav-eb1ic 3 года назад

I do think same, please use precautions

@sikandaraziz9674 3 года назад

Thanks for teaching us to repair head phones jack pin. It’s a perfect way to repair it but frankly speaking you must admit that some serious mistakes have been made during illustration.

@joshhayl7459 2 года назад

🟦 Yeah!..... Mistakes like call'n a 'PLUG' a "JACK!!". .....smh.

@taribule 2 года назад

just buy a new one

@fatifati1958 3 года назад

شكرا عمل ممتاز قد يكوناحترافي لو كان معه لغة وشرح. جيد

@Rio-by1eh 3 года назад

Boeing wiring 101...great job now when you live off grid

@MAlyTech 3 года назад

Thanks you very much bro😘

@ringisfloof7351 2 года назад

Thank goodness a quick, at home fix for my headphones Let me go get my soldering iron everyone has

@rabbitshady499 10 месяцев назад

Yeah.. people have those, if u don't then it's not his fault. Buy one, they're cheap as fuck.

@alexandrshitikov3154 3 года назад

00:22-00:47 - нельзя так делать! В большинстве случаев это заканчивается порезанными пальцами! Возьмите обычный женский фен для сушки волос - нагреваете и снимаете, как вам надо( откусив провод предварительно кусачками).

@rabierabie8172 3 года назад

جيد..good...👏

@mirtahartung8623 Год назад

Gracias!!! Que bueno nos puede sacar de apuro cuando se nos rompe 👍

@debraaj123 4 года назад

good job bro

@phabi0 3 года назад

Unbelievable amount of work for a 50 cents plug.

@CHECK_ENGINE21 2 года назад

Yeah but why u r here then?

@ghufran9494 Год назад

@@CHECK_ENGINE21 👍

@vijaybairwa6810 3 года назад

Thank you very much.❤️❤️❤️👍👍👍

@jinuzshahmasajidh3165 3 года назад

Tnx very helpfull vidio...

@mr.opnoob8902 3 года назад

Nice work it helped me a lot i mean a lot 😁

@imanmd455 2 года назад

I was determined to get my headphones fixed, but after seeing how many tools I didn't have and had to use them to fix them, I decided to buy new ones.. Umm, thanks anyway!

@himadrics 2 года назад

Thanks you... repairing done successfully 🤘

@cherry1311 3 года назад

Good job!! A appreciate it

@michaelpace2321 2 года назад

I have nothing but respect for this dude he's genius

@venturamartinez5614 2 года назад

Tienes que pelar , rayar, o quitar el esmalte de colores que tienen los cables con cuidado en las 4 puntas con el cortador Para que en esa parte se adhiera el estaño.

@manahilsaleem289 2 года назад

Thanks bro. I just repaired my handfree becoz of you.

@dr.sayedmasood5519 3 года назад

Thank you for teaching for new like me🙏👍

@Fikry-Elfassakh 3 года назад

Good . 100 likes

@RajaRam-cq6du 3 года назад

Wire Color coding and soldering ,if diagramed in a chart before soldering will be helpful, any how nice to watch 🙏

@charans8614 Год назад

It helps to me bro great video

@user-qp5fx1ds8k 3 года назад

Nice work 👌👌 bro.......

@alexyu6928 3 года назад

First, the soldering iron was way overheated and that was why no solder could stick onto the tip of the soldering iron and that caused rapid oxidation of the solder and in turn made it hard to pre-tin the wires. Second, the soldering job was just sloppy there shouldn't be a big bean of solder on the connection point. Third, he didn't even check for mic, left audio, right audio wires configuration. Forth, if he did a decent job of soldering the wires he could close the white plastic sleeve without shaving it down. Over all a very unimpressive repair job.

@joshhayl7459 2 года назад

🟦 Whaddayuh want from someone that doesn't even know better than to call a 'Plug' a "Jack!!".

@ghufran9494 Год назад

Amazing Post-martem......do u know way to check wires coloring configuration, other than(red-copper-blue-green)this?

@papichilo9437 3 года назад

Went & bought new earphones AND the video was still playing when I got back.

@RSLokeshwaran 3 года назад

😂😂😂

@sanyijutuber2381 3 года назад

🤣

@afridimuktadir7578 3 года назад

Epic 🤣🤣🤣

@shubhamdwivedi6927 3 года назад

😂😂

@godserf1 3 года назад

Excelente vídeo..

@Ericlo71 3 года назад

Thanks Buddy, Very Good

@pradeepslm1960 3 года назад

Bro before cutting the pin rest on the table firmly not with in the hand possible to slip and damage the skin.Tku

@KISSANHOMEENGINEERING 3 года назад

Thanks for suggestion

@antoineolver7222 3 года назад

Safety first! BTW I better buy new earphones and save on tools and effort.

@anatoly_trifonov 3 года назад

I've done this many times and the main wisdom in the end - in fact, it was necessary just to strengthen it with a heat shrink without disassembly.

@arvindkadam6709 3 года назад

Im confused which wire where to solder....total are 4.

@muhammadatifsaleemmalik3102 2 года назад

Or use apoxy coating as well, very thin, slim & reliable, long lasting.

@anatoly_trifonov 2 года назад

@@muhammadatifsaleemmalik3102 Yep. Epoxy saves things.

@ghufran9494 Год назад

@@arvindkadam6709 red-copper-blue-green

@kidambikrishnan5027 4 года назад

Good work

@awadheshkumar-jr9lx 3 года назад

Very nice....Badi mehnat kiye aap!!😄

@pranilrathod8996 3 года назад

Superb..! it is just amazing to watch you do the entire process. I was literally while watching it the first time. It certainly helped me with my headphones, i have several pairs which weren't working.Thanks a Lot

@blackrose4402 3 года назад

Is it safe to cut something like how you was cutting with razor cutter .

@sunilcskadam3107 4 года назад

थँक्स 🙏💐

@rakshasingh5147 3 года назад

Thank you very much....this helped a lot.....I repaired my earphones...great video

@jaypashupatinath7909 3 года назад

You repaired?

@rakshasingh5147 3 года назад

@@jaypashupatinath7909 yess I repaired and it 100% worked 👍

@jaypashupatinath7909 3 года назад

@@rakshasingh5147 i dont have soldering iron what should i do

@azizkhan9959 2 года назад

Hello my dear friend

@johnfemi8072 3 года назад

3:44 could be easier. Just wet the tips of the earpiece' wires with flux before soldering.

@KOT_MATROSKYN 3 года назад

Вы это видели? Он взял и воскресил наушники, это прсто чудо, он бог.

@deeparonghe5463 3 года назад

Amazing 👌👌👌👌👌👌👌👌

@muhammadatifsaleemmalik3102 2 года назад

You make the simple process hard, but anyway good effort, like your work، use the tar to remove insulation layer on the hand free's wires.

@vasureddy4296 3 года назад

After watching this I decide to buy a new headphones 🎧

@shubh7556 3 года назад

🤣😂same bro

@snehachowdhury7462 3 года назад

😂😆😆🤣 same 🙏🏻😂

@aestheticgirl5018 3 года назад

Same bro

@bingewatcher6077 2 года назад

Delicate operation, but the result is satisfactory, thank you for this good video.

@mohamedsahari7312 3 года назад

Bravo vous êtes doué et excellent

@felixaguiar1168 2 года назад

You have to burn the tips of the wire coating with the help of the gas lighter once the coating is removed it is very easy to solder the wires

@Jello1963 2 года назад

yes or use some sandpaper to gently remove the coating

@joshhayl7459 2 года назад

🟦 An Industrial-type 'Scotch-Brite' pad works best! (I use the burgundy or the gray).

@cosakti 3 года назад

next time try to insert the black tube first before make a conection and after soldering you can slide it back to the position without extra cut. this rule apply for almost all cable soldering

@KISSANHOMEENGINEERING 3 года назад

I knew but I forgot.

@raymart4848 2 года назад

Thanks this video, Now i decide buy new earphones !

@ftopravigaming8923 4 года назад

Thanks bro 🙏🙏🙏🙏🙏🥰🥰😍😍🤩

@islamkishehzadi3230 3 года назад

Same hare

@virenderjoon4766 4 года назад

Thanku bhai g

@ajjlhnh6837 3 года назад

这个操作重点在于刀技，一不小心，手能见骨！

@chuajb2756 2 года назад

非常危险安全第一

@minenandha 2 года назад

Great Work bro✨

@Bianchi77 2 года назад

Nice video, thanks :)

@Russ_Russov 2 года назад

Для снятия лака с провода использую таблетку ацетилсалициловой кислоты, воняет просто жуть но любой лак растворяет мгновенно. Для лучшего сведения концов старой изоляционной тубы надо было использовать пассатижи или в маленькие тиски зажимать,тогда бы не пришлось ножом подрезать.