How to Repair Leaky Air Compressor Hose

Подписаться 526 тыс.

Просмотров 55 тыс.

50% 1

In this video, I show you one method how to fix a leaking air compressor hose. Hope this helps.
• Subscribe on RU-vid: bit.ly/SubscribeToTheFixer
• Facebook: / thefixeronyoutube
• Instagram: / thefixeryoutube
• TikTok: / thefixeronyoutube
• Website: www.thefixerhomerepair.com
• Patreon: / thefixer
• Amazon store: www.amazon.com/shop/thefixer
*As an amazon affiliate I earn commission on qualifying purchases
Buy a hose repair kit here - amzn.to/2IXOqTU
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by The Fixer are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and The Fixer cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!

Хобби

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@TheFixerHomeRepair Год назад

Buy a hose repair kit here - amzn.to/2IXOqTU *As an Amazon Affiliate, I earn commission on qualifying purchases. Subscribe to my channel: bit.ly/SubscribeToTheFixer Thanks for watching! 😃

@Baileys.small.engine.repair 2 года назад

This is so helpful I'm trying to study as much as possible and gain as much knowledge as possible as a teenager not because I wanna be a mechanic but so that I can repair a majority of things myself without buying new parts or paying for a professional to fix it but it is awesome and kind of this man to share his knowledge with us love it😊👏❤

@TheFixerHomeRepair 2 года назад

Hey, Bailey! You have a good plan there! You will save a lot of money and headaches learning to fix things yourself. And it will be rewarding! I am honored that I could help you with this mission! Thanks for checking out my videos!!

@Baileys.small.engine.repair 2 года назад

@@TheFixerHomeRepair omg you're so kind an encouraging you just encouraged me and let me know that I'm on the right track and that learning ahead of time will actually save money and time if it weren't for you and a few other videos I watched to get the hang of it don't know how I would've learned it so fast God bless you!❤💚💜

@TheFixerHomeRepair 2 года назад

@@Baileys.small.engine.repair Happy to hear that! I am 38 and strive to learn something new every day. You can never learn too much!

@Baileys.small.engine.repair 2 года назад

@@TheFixerHomeRepair you got that right man there's nobody on Earth who knows everything besides Jesus also I wanna work in the medical field and test out many different things like a pharmacy technician for example and so much more FOR THE SAKE OF SAVING LIVES I'm all about educating myself and others along with helping myself and others you have a good heart though man me and you have something in common we both wanna learn and discover things

@TheTazz5150 5 лет назад

I would first make sure that the hose is nice and twist-free before connecting the two... The use of the bag was brilliant! Thanks for the video!

@TheFixerHomeRepair 5 лет назад

Good tip! Thank you for the kind words!

@Baileys.small.engine.repair 2 года назад

As a matter of fact coming back to this video and reading our conversation I think I'll surprise you! Help you get more subscribers by telling others about your channel and how kind you are! You'd love that huh?

@drewzown 4 года назад

You just saved me so much electrical tape! You have no idea

@randy1203 3 года назад

I have a idea, heat shrink tubing. A few over the clamp, one jumbo or two over the whole mess!

@donnysimmons5790 3 года назад

Great tips. Maybe some glue to avoid hose clamp bulk.

@richardjanz3065 4 года назад

Note to fellow workers I tried the silicon tape offered by 3m and others on two separate holes on one of my air hoses today. Both sealed perfectly. It took two attempts to get it to work and it only worked when I had one guy holding the hose taught with the other end in a vice, and then wrapping it with extreme care and stretching it out as hard as I could. I'll let you know if it doesn't withstand the test of time

@TheFixerHomeRepair 4 года назад

Thanks for the tip!

@Baileys.small.engine.repair 2 года назад

@@richardjanz3065 hi very sorry it didn't work just outta curiousity did you throw it away or were you able to fix it? If you fixed it how so? Just trying to gain as much knowledge as possible as a teenager not because I wanna be a mechanic or anything but because I wanna have the knowledge to fix my own things at home when I grow up to save money from getting it professionally repaired or buying new parts😊

@Baileys.small.engine.repair 2 года назад

@@richardjanz3065 thank you so much!

@kingfisheroutdoors4497 4 года назад

that bag is a good idea. I think I will try it or maybe some foam if I have any

@TheFixerHomeRepair 4 года назад

Great idea! Thanks for watching!

@kurttappe 10 месяцев назад

Even with heat and wetting the fitting, I cannot get it even halfway in. There has to be some other way?

@lindamorgan2678 2 года назад

My mechanic told me you can't really fix it just a buy a new hose .... Geez .Thanks so much and I would of done the same thing cover up those clamps

@mikehaisell4301 Год назад

I have repaired the ends on my plastic air hose three times (without heat) and it has blow every time. Sometime in the middle of the night. I will try one more time using heat. I hate to throw it away. It is the kind with all the curls in it so is stores away nice and small. It always splits in the area where I forced it on the fitting. It does take a lot of pressure to get it on. Maybe heat will solve it.

@Baileys.small.engine.repair Год назад

How'd it work out?

@mikehaisell4301 Год назад

@@Baileys.small.engine.repair It kept blowing. I think the hose was just too old so I threw it away in the end. THanks

@maryannetobin2513 4 года назад

Has anyone tried using a PEX compression fitting? Seems like it would be not so clumpy. I would heat the hose with hot water.

@asappestcontrol1250 4 года назад

Thanks this help with the quarter inch hose from the mini.portable 12v compressor. Was calling it dead, but now it has new life. Thanks

@TonyScandal 3 года назад

As ugly as porcupines mating.. but it works.. and that is all ya need.

@360pack 5 лет назад

you could have used a heat gun on that plastic bag to mold it into a permanent fixture

@TheFixerHomeRepair 5 лет назад

Very true. Good tip!

@hostilityy 2 года назад

where did you buy the hose?

@Baileys.small.engine.repair 2 года назад

Would you like me to send you a link to a real good air hose that's lasted me a while? If so, what size?

@hostilityy 2 года назад

@@Baileys.small.engine.repair 1/4 OD

@ClayBlasdel44 5 лет назад

it would help a lot if he showed the parts needed without shaking them around

@moonolyth Год назад

I have e same brand, material discolors and pop's within a couple yrs. Don't invest in to many as it won't pay off when having repairs between jobs and I take care of them to. To splice I eather get the double ended ribed fittings or make one with copper pipe, (wks fine) and use wire to tie together. Made a tool for using reg. Wire. Look in utube it takes a little time but there is hardly any obstruction to get cout up on stuff and they will certainly out live the life of the cheep A$$ hose.

@moonolyth Год назад

Any one have experience with better hose for a reasonable price. This stuff sucks after a few seasons.

@nocandopdx 7 месяцев назад

Lololol i swear i thought this is an April folks joke Jesus Christ. Get rid of that entire meat hook anortion. You don't need those hose clamps, holds just fine with friction alone up to 150psi. Add a tiny bit of silicone lube to the brass ends and you won't need to heat the ends to get it on, that way the hose will remain tight enough to never come apart. If you doubt my advice, do what i say and see if you can pull it apart without the hose ripping, never use those clamps. Btw it's only for this exact hose, the rubber ones do need clamps. YOU'RE WELCOME