How To Repair Microwave Synchronous Motor | Turntable Motor 

All good !!!!followed the video took everything apart and inspected the gears all was fine. My gear layout was a a little different so it took me a bit to fit all the gears back together. I dry tested on the wires from the micro to see if it worked and it did. Now i will put it all back together...Cheers

Thanks, very helpfull

Exact the same problem. Got fixed it. Saved my time and money. Cheers..!

Hi' So great ! You'r the best. Thank you from France

I have an overhead microwave and was able to drop the bottom off with 3 screws. I put a bottle of water in and started it with the bottom panel hanging down. I could feel the motor vibrate because it was running. So i figured it's a stripped gear. Nothing to lose, so i carefully opened the motor. The plastic gear attached to the black magnet slipped apart but wasn't stripped or broken. I supper glued it back dead center, and that fixed the problem. I have a new one coming, but im not sure it will be delivered in this decade 😂

Perfect

🎉nice one

I have two synchronous motors to be rewond . Is it possible?

😊

Dear sir, very informative. I have a samsung microwave and its turntable jurks while rotating. Should I replace with new or open and repair it as shown in this video. Pls advice.

What cord did you plug it into to plug in wall to turn it on?

I am wondering how to make this motor rotate in one direction cw only. Please help

10x a lot

Not a good idea to lubricate or spray plastics with WD-40 ! It is way better to use a grease paste,or fine machine oil.

I have original Microwave Synchronous Motor that says 120V 4W 5 RPM. Is it ok to replace it with Synchronous Motor that says 220V 4W 5 RPM?