How to Replace a Bathroom Sink Faucet

Подписаться 21 тыс.

Просмотров 181 тыс.

50% 1

Affiliate link to the faucet I installed in this video: www.amazon.com...
In this video I show you how you can change your bathroom sink faucet. It is actually quite easy to install a new bathroom sink faucet. It is definitely one of those tasks that are a lot easier than they look!
To replace your bathroom sink faucet you just need to disconnect the water lines, remove the old faucet, assemble the new faucet, install the new faucet, and reconnect the water lines!
It also requires very few tools and materials. The only special thing you will need is some teflon tape. Everything else should come in your faucet kit.
I was surprised at how easy it was to install a one-hole faucet in a 3 hole sink. It is just a matter of covering the 2 extra holes with a baseplate.
Overall, replacing your bathroom faucet is a great way to upgrade your bathroom! Having a more modern and stylish faucet really transforms to look and feel of your sink!

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@epicdiver 2 года назад

The only video I could find that showed the older faucet and how to remove it! Thank Gawd you didn't edit that part out! Thanks bro!

@svenska81 3 года назад

I’ve been procrastinating changing my faucet, but I feel more confident now. Goodbye nasty old one, hello, lovely!

@matthenson9995 3 года назад

Thank you so much, the tip about the clips in the old handles and the Allen wrench in the drain stopper hole saved my project. I almost had to call a pro. Thanks again.

@Ettore 3 года назад

Heck yeah man! Comments like these are why I love to share! It's impossible to find disassemble instructions. Glad I saved you time and money!

@Haddley333 3 года назад

This is so much better than the home depot version, they always make everything look so easy.

@mikeb2694 2 года назад

great video, one thing that wasn't clear to me but i figured it out. when you chisel, hold the chisel vertically so the sharp blade cuts towards the rings and cuts through that brass lock towards the threaded pipe. you aren't trying to pop it off or separate it from the sink you are trying to cut through it. once you cut through the brass lock thing and hit the threads i used a needle nose pliers to separate the cut and it unlocked the threaded pipe and it dropped to the floor inside the cabinet. prior to that i was struggling so hard under the sink to unscrew stuff. all the work is on the top of the sink.

@spiegel3269 10 месяцев назад

Finally someone with faucets like mine. I had no idea how to get them off. I didn't know the base of each handle turned because mine seemed locked in place,

@aninalvarado 2 года назад

Awesome! Thanks for such a great video. Now I'm confident I can replace my old faucets for something more modern! 🥰

@tararountree2865 11 месяцев назад

Most excellent video, I really wanted to replace my 3 hole with a single for a modern look. Wasn’t sure that was possible but you made it quite clear, really appreciate your time.

@alive-awake Год назад

2nd time watching this much later. I've heard there is a right direction and wrong direction to wrap the teflon tape on, and I always forget what the correct way is. I would like to have seen you replace the drain plug as well. Nice looking faucet. Good video.

@Ettore Год назад

Thank you! I have another video replacing the drain plug ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GczQ23CgYLc.html

@ameedell8491 3 года назад

Thank you , You were clear and the visuals really helped out a lot. Great Job !

@Ettore 3 года назад

Glad it helped! That was my goal!

@kennethreister7619 Год назад

I've found from experience that it can really help to add some Plumber's Putty under the base plate. When I didn't do this any splashes of water around the base plate would end up leaking under the sink. Plumber's Putty is real low tech stuff that works wonders at preventing leaks.

@smc6746 Год назад

You are really good at teaching, not everyone is. Thank you!!!

@stephenlloyd7864 2 года назад

Great tip at the end with the water pressure

@MsLucyandethel 3 года назад

Wow! I'm going to pass on this project, too hard for me. But I love the idea. And absolutely love your videos. They are so artistic. Can't wait for the next renovation

@Ettore 3 года назад

Thank you!

@dogscratchedoor 8 месяцев назад

Wow. That helped so much! I didnt think it was so straight forward, I think I can tackle it now. Thank you!

@dreat0227 Год назад

Thank you for the video. This was so easy to follow and I was able to change my faucet. Although it took me a while because I couldn't close the water fron under the sink. It was too tight so eventually I shut off the main water line and I was able to do it that way.

@vinja858 5 месяцев назад

Through online googling, it says if supply lines have some form of rubber gasket, which yours does have, then you shouldn't use the teflon tape.

@Moreno1232 2 года назад

Besides putting on you’re Teflon tape against the grain, you did a good job. 👍🏻 nice,

@davi1 2 года назад

actually those water lines have the rubber seal you are not even supposed to use teflon tape with them

@ellenthompson6474 2 года назад

This is such a clear explanation of how to do this!!! Thank you!!

@pearl7328 3 года назад

Thank YOU for your inspiration, I managed to do it myself too :P

@medixsteve 3 года назад

Hey bro, good job on this video. You were clear and the visuals really helped out a lot.

@Ettore 3 года назад

Thank you, it means a lot! I try my best to help out

@tawandatracee8327 2 года назад

THANKYOU. I'm not a Handy Women (but am fine helper :) ) and wanted to make sure this was as easy as I'd hoped before asking Handy Hubby to do (so I could make sure I wasn't going to be told it was too troublesome to ask to be done :) )

@PilotDamian Год назад

You should always apply the Teflon tape in the same direction as the rotation to tighten. But a good video thanks for posting!

@DaruDhillon Год назад

Most new faucets don't recommend using Teflon tape anymore. Be sure to check your installation guide to make sure. 👍

@mermaiddiyartist8119 2 года назад

Yes rubbing alcohol is the best!! To prep before many projects!! Thanks for the tips. I’ve watched many videos. This shows more steps!

@benitamach5724 Год назад

Thank you! I'm over sixty and plan on changing out my facet!

@stephenhernandez4403 3 года назад

Awesome video very detailed thank you so much truck driver from Southern California…🚛🚛

@frmzwallarts9841 3 года назад

Cutting teflon with a pair of scissors? You boy is next level!

@Ettore 3 года назад

Hahaha, do most people find this difficult?

@frmzwallarts9841 3 года назад

@@Ettore Speaking from a sophistication point of view hahah because I personally just stretch it until it tears, same goes for electric tape too haha

@christyheron 2 года назад

best vid about this...you're such a great "host" ...thank you

@eurika1240 2 года назад

Very helpful! Can you post the link or name of the faucet you installed? That exactly what I’m looking for.

@kpsher367 2 года назад

Thanks for putting this instructional video together.

@jomast5553 2 года назад

thanks very easy to follow your tutorial

@wilmerfajardo8488 3 месяца назад

Excellent instructions. Thank you

@Wolfspyder5 9 дней назад

Great Video. Thank you!

@joif6008 2 года назад

WOW! You made that look easy. I'm inspired. Going to replace my faucet. Thank you

@Ettore 2 года назад

I believe in you!

@Awesumpye25 Год назад

I got the tail pipe gasket upside down so I had to redo that but other than that, I did it in one go 😂 thank you!

@haydencraig6594 6 месяцев назад

Great video! Thanks for making this👍

@haileybelcher5300 2 года назад

This helped me so much! Thank you for being so clear!

@Carla-bk3zu 3 года назад

This was super helpful!

@christinme6695 2 месяца назад

Thank you for this!!!

@chikisinc9710 2 года назад

Thank you for being so thorough. 🙏🏼

@sarcasm701 2 года назад

What happens to the drain plug??

@DouglasGross6022 Год назад

Some faucets come with a new pop-up assembly. If this faucet has no hole for the pop-up rod (that's not good), you'd need to change the drain yourself.

@patchesdriftwood34 2 года назад

Really enjoyed the video! I do have a question, do you own this property? If so, I would suggest replacing the J bend and tailpiece. Also, I would change the multi turn shut off valves to quarter turn shut off valves. The reason the black water came out is actually of the black seal in the multi turn shut off valve is deteriorating and when the water is shut off and turned again that will happen.

@Ettore 2 года назад

Thank you! I do own the property, what is the advantage of replacing the j bend and tailpiece? My previous faucet wasn't producing black water and it has never done that since. I'm pretty sure it is residue from the factory.

@patchesdriftwood34 2 года назад

@@Ettore the J bend and tailpiece you have now are made of aluminum. Over time as water sits and passes through the J bend and tailpiece, it will skillet corrode the aluminum and become brittle and thin. Not super alarming right now to change it, but it’s good preventive maintenance to change them to a plastic J bend and tail piece with new seals.

@patchesdriftwood34 2 года назад

@@Ettore it’s possible it was from the faucet. But I do know the packing/seal in a multi turn shut off valve is black. When you turn the valve off, it tightens and closes the packing. When the packing is older it usually leaves a black residue once the water is turned back on you can see it come out. You can always test this by turning the water off with the multi turn valves underneath that bathroom sink. Have it off for about 5-10 minutes or so, and turn them back on slowly. Once back on run the water out of the faucet. If you see any black in it, it’s from the packing in the shut off valves.

@igloozoo3771 8 месяцев назад

it is the removal of 20 yr old-school faucets that is the tough part. installation of newer faucets are easy peasy.

@CJ-222 2 года назад

Do you have a link to the specific faucet you installed? I really like it but can't find it. Thanks!

@Ettore 2 года назад

Just added a link to the description because of this comment! It's around $42, one year later it's still working great!

@luizako23 Год назад

Thank you for the video. Big help!!!

@anastasiaralye9531 6 месяцев назад

Great tutorial--thanks!

@SteveBiedermann 2 года назад

Chisel? Lol ok worth a shot. Looking at something similar.

@michaelmappin4425 2 месяца назад

Oh man, I need more help at around 4:15. 😢 chiselling doesn't seem like the best procedure

@terrinuss9161 3 года назад

Thanks for the instruction. I’m going to give it a try.

@mrphelps72 2 года назад

Thanks for the video. Well done!!!

@hippygypsy777 3 месяца назад

Thank you

@JackCharlottePreston Месяц назад

Hey what about the drain stopper?

@AnnArborBuck 2 года назад

Nice video, but you don't need tape on those water lines, they have a rubber gasket. That said, you put the tape on backwards, it should go on the same direction that you have to tighten the nut down.

@Ettore 2 года назад

you are 100% correct. I have 2 bathrooms and I did it correctly on the second one :D

@Veryunluckyman56689 2 года назад

Very good tutorial. 👌🏻👌🏻👌🏻👍🏻👍🏻👍🏻.

@Fat_Catt 3 года назад

Got a thumb up just for the jump entrance at start of video

@nanethbickerstaff8693 2 года назад

Wow very interesting love ur diy 😍

@hurumampesha5005 2 года назад

Awesome job 👏🏿👏🏿👏🏿

@samgao 2 года назад

does your new faucet not have a drain plug? meaning that it'll always drain?

@bryantbunch5maryhele Год назад

You can buy them with or without a matching drain plug. My guess is that he just chose not to change the drain plug. I’ve been looking for a video that includes that step because it would drive me nuts to have a black or bronze faucet and a chrome drain plug.

@dianarojas-hoyos3330 5 месяцев назад

thank you!!!

@DouglasGross6022 Год назад

Chisel? Those are C clips. My faucet was in far worse condition. Unscrewing the handle bodies from the bases was difficult, but those clips came off with pliers. Where did you place the hex key/Allen wrench?

@MichaelGates-q9b 2 месяца назад

Sorry, but you did not say how to reinstall the sink drain mechanism. What up? How do you reconnect it?

@alexgavin6920 3 года назад

I might try this, great tip! thanks

@Ettore 3 года назад

No problem! Good Luck!

@roonalddawson1 Год назад

Beautiful

@KingHarry1 Год назад

Main purpose of cleaning the sink before installing new faucet is you’re supposed to add silicone or other approved sealant to adhere new faucet’s base plate to sink free of dirt or grease. Yes you have a nut and washer holding faucet in place but that won’t prevent faucet moving out of place over time just FYI. Not trying to be another RU-vid hater I just love learning how other people work

@aw7579 11 месяцев назад

does it create a tight enough seal or do you need to silicon seal the faucet to the sink?

@aligee6277 Год назад

Excellent

@HorrorFreakNY 3 года назад

Great video man, thanks! Just subbed!

@shaunehemphill3259 2 года назад

Link to faucet please

@andytakata4008 Год назад

Always use Teflon tape unless the manufacturer says not to. But good video.

@kenniitran 3 года назад

Thx for a great video. I will do mine soon :-)

@BloomByCC 3 года назад

Thanks man!

@Kid-o-tainment 2 месяца назад

My faucet smells like copper after Changing the faucets any suggestions?

@JackCharlottePreston Месяц назад

You forgot to show the stopper, Dec Plate!

@daradoes 10 месяцев назад

Update on the faucet two years later? Any jamming or paint chipping?

@Ettore 10 месяцев назад

faucet is still going solid! I will say that the only downside is that toothpaste residue is very visible in matte black

@jdmullin1234 3 года назад

I have the same faucet and THANK YOU for posting this! I'm still struggling to even get to the clips. I'm missing a step and stuck with the bottom chrome ring still on, I don't see you remove that in this video and mine will not budge. I unscrewed the cap like you did, but there is still a small chrome ring before I get to the clip you had to chisel off. Any tips?

@Ettore 3 года назад

Regarding the chrome ring, are you talking about the new faucet or the old faucet?

@jdmullin1234 3 года назад

Specifically, at 3:36 the right post still has chrome ring on bottom, but the next time we see it at 4:27 it is gone. Did yours just pull off?

@Ettore 3 года назад

@@jdmullin1234 i see. Mine came off pretty easily if I remember correctly. Yours might be a little stuck to the sink. Do you have a chisel? Giving it a little tap could get it unstuck. Or maybe grippy gloves

@jdmullin1234 3 года назад

After watching some other videos on this terrible faucet design, and realizing mine was rusted/seized together, I took a dremel and cutting wheel to mine, being careful not to hit the sink itself. One cut on each side of the circle, then drove a screwdriver in to finish and split them apart. Took about 2 minutes once I resorted to this method. :)

@daradoes 10 месяцев назад

Would you recommend this faucet? Is the paint peeling or any jamming?

@evelynrg2325 3 года назад

Very good video....

@kaycee7202 Год назад

Did you order that black piece to secure the faucet to the sink? literally bought the same one and it did not come with that, also mine is leaking at the faucet from the water lines I definitely forgot to tighten the top base of the water lines so ill double check but would do you recommend i do anything else?

@Ettore Год назад

The base plate to cover the holes? Mine came with it. This was a couple of years ago, so maybe they don't include it any more? If it is leaking there is definitely something wrong, sorry for your experience :(

@jeremylindsay6406 3 года назад

Dude, great video I have the same exact sink but I CANNOT get the bottom rings off wtf is the secret?!?!?!

@jeremylindsay6406 3 года назад

Never mind, I just kept watching your video over and over and studied your technique a little closer each time and figured it out. You’re the man!

@Ettore 3 года назад

@@jeremylindsay6406 that's awesome! Glad you were able to follow my technique! I have 2 identical bathrooms, so I struggled a whole bunch with the first one just like you. Glad I could help!!

@madisonwilliamson 3 года назад

Do you think this is renter friendly? Would I be able to change it back if needed?

@Ettore 3 года назад

Shouldn't have an issue installing old one. If you ask your landlord, he might let you leave it or even pay for it

@dantran6190 2 года назад

Curious, did you install a new drain plug as well?

@Ettore 2 года назад

Yes but not in this video. Not all faucet kids come with plugs, so I decided not to include

@eddiecedillos8417 Месяц назад

Get you a basin wrench bro. You’ll thank me later 🔧

@Mirah5 Год назад

What about the drain plug. It’s just gonna stay open and be a pain to open if it closes

@Ettore Год назад

I recently made another video about replacing the drain! My faucet kit came with a pop up drain, so it doesn't have to be connected to the faucet

@tekotoke4582 2 года назад

What about the drain plug? How did you tie the bar?

@Ettore 2 года назад

the drain plug that came with the set was a pop up one, so it doesn't use the bar. I just recorded a video on how to install it, will edit and upload soon :)

@psfgtech 2 месяца назад

How do you open the mirror?

@farimeb 2 года назад

Can you post specs regarding the 360 camera you have plz

@henl9418 2 года назад

Wow great video the people who gives this video the thumbs down 👎 should go to hell🙄🙄🙄

@zahranekooei9227 Год назад

What is the brand of faucet?

@Person-mh6xq 2 года назад

Good video. But that high gooseneck with a small bathroom sink just doesn’t make sense. Will also increase the splashing.

@Ettore 2 года назад

I wanted something high so I could easily refill my waterbottle. You're right about the splashing, I had to reduce my water pressure to counteract

@alive-awake 2 года назад

Do you need to be concerned with water leaking under the face plate and going down the two side holes that aren't being used now?

@Ettore 2 года назад

Mine doesn't leak, is yours leaking? If so, you should fix that asap.

@alive-awake 2 года назад

@@Ettore No, I haven't replaced my faucet yet. I've been pondering this, wondering. I want to get all my ducks in a row before attempting it. Do you caulk around the face plate?

@Ettore 2 года назад

@@alive-awake I didn't, but it might depend on what faucet you're using. Mine had like a foam gasket thing that helps seal the crack. There isn't a lot of water that gets splashed towards the holes, so I wouldn't worry about anything leaking through the holes

@alive-awake 2 года назад

@@Ettore Mine has a foam gasket as well. I guess I won't worry. Thanks!