How to replace a Cooker hood extractor lamp bulb G4 12v 20 watt halogen light

Подписаться 135 тыс.

Просмотров 33 тыс.

50% 1

This Video www.how-to-repair.com/help/ho... will show you To replace a cooker hood extractor light halogen bulb G4 12 volt 20 watts out of a light fitting.
🛒 Cooker hood G4 Bulbs
shop.how-to-repair.com/produc...
▶ Bosch Neff & Siemens Full diagnostic cooker hood video
• Bosch Neff Siemens Coo...
▶ Hotpoint, Indesit, Ariston, Whirlpool Full diagnostic cooker hood video
• Cooker Hood extractor ...
🛒 Cooker hood parts
www.how-to-repair.com/help/se...
#cookerhood #lamp #extractor #cooker #hood #bulb. #replace #fit #light #G4 #12v #20w
This is quite an easy job you will need a small flat blade screwdriver to be able to prize the stainless steel rim away from the light fitting be very careful when doing this as you may damage the glass at this point you really want to disconnect the electricity supply as if you accidentally touch anything lonely with the fitting when removing the bulb you may cause a short and therefore do damage to either the circuit board all the transformer. Once you have disconnected the power with your fingers slide the bulb backward away from the fitting and the two prongs that attach to the bulb will come out you can check the bulb visibly making sure that the filament is attached to the bulb correctly or make sure the bulb is not black as these are clear signs that the bulb may have blown. Replace the bulb with a new one making sure that you do not touch the glass with your fingers and also make sure it's clean before handling it as any grease that may be on your fingers can cause the bulb to blow so I suggest using a piece of tissue when handling the bulb insert the bulb carefully into its location pushing only softly once it is fully inserted into the holder you are then able to reconnect the power and test the bulb before replacing the glass cover to the light fitting there are more detailed videos on diagnosing problems with your cooker hood in the cooker hood section at our website.
At How-to repair, we care about our planet!!
We now have Live Q@A's weekly on our live show , see our home page / how-2-repair for the next date
Before throwing away your cooker hood as you think it’s not worth the effort to repair and running to buy a new extractor it might be a simple fix.
The appliance industry is responsible for a lot of global warming due to built-in obsolescence this is not a well-known fact and is designed to make you consume more machines to make the companies more money. but sometimes we are also at fault as well, as was the story on this washing machine thrown away as it smelt a little and did not look pretty anymore.
Full Tutorial and links www.how-to-repair.com/
timestamps on this video
00:00 How to replace a Cooker hood extractor lamp bulb G4 12v.
00:37 how to repair intro.
00:48 How to Remove Cooker hood extractor glass lens cover.
01:20 How to Remove Cooker hood extractor bulb.
01:48 How to Replace Cooker hood extractor light bulb.
02:42 Testing Cooker hood extractor lamp bulb G4 12v 20 watts.

Хобби

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@jason.vasilev 7 месяцев назад

Cheers! Very informative and helpful. I was half way taking the thing apart and wondering how to take the bulb. Didn't know I can just wiggle it out so simply and save myself some time. Thank you once again.

@cathymak4678 Год назад

You explain it clearly, thank you so much

@How-to-repair Год назад

Glad it was helpful! Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ru-vid.comUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@ksh2488 Год назад

Fantastic video!! Thank you!!

@barrytemple808 2 года назад

Excellent footage well executed 👍

@How-to-repair 2 года назад

Thank you Barry but how can I take a compliment when every man and his dog will know that you're on the show each week. I will long term use the donations that are provided by the consumer to provide a better show each week.and hopefully get the manufacturers on board with the design process of the machines. this is not about a consumer society this is about actually making the planet a better place with longer lasting machines and more repairability. In my lifetime I would like to see the right to repair program that is coming in place make customers more comfortable in purchasing their appliances and the manufacturer more responsible towards the environment for our future generations

@richierich291266 Год назад

Excellent vid. Very helpful. Thanks 👍

@How-to-repair Год назад

Glad you found a video helpful. Hope you had a good New Year. Please remember to subscribe to the channel as that helps us glad we could help you @richierich291266 this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@chickachambrez 9 месяцев назад

Great video!!! Nice one

@MrInterpriser 2 года назад

Thanks, seems easy

@How-to-repair 2 года назад

Not a difficult job you fight should find it easy to repair

@mn7024 6 месяцев назад

Fantastic presentation. One of my round silver edged lamp glass cover keeps dropping, no longer staying on. PLEASE ADVISE Thank you

@embem8537 Год назад

Thank you!

@How-to-repair Год назад

You're welcome! I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ru-vid.comUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@xSO20 2 года назад

if I want to replace it with newer LEDs what type do I get? DC type or AC type? and is the G4 12v 20 watt halogen light AC or DC in the kitchen hood?

@pauldehaan1065 2 месяца назад

Thanx 😉

@How-to-repair 2 месяца назад

You're welcome! Glad the video helped you get your cooker hood lit up again What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RU-vid superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @pauldehaan1065 please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍

@abdulhafeezpatel Год назад

Thanks sir

@How-to-repair Год назад

Glad I was able to help you always remember not to leave any fingermarks on the bulb. Have a great New Year glad we could help you @abdulhafeezpatel this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@Carl-ms2tl Год назад

Hi thankyou for video , I have a FABER cooker hood and there is no glass to remove , it is a whole unit , do I pull whole light down to access the bulb ? Thkyou Carl

@How-to-repair Год назад

I would imagine so, but I can't be 100% because I do not have the cooker hood in front of me. Just take your time and see how to remove it. glad we could help you @user-nj3lj9wb9w this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@Carl-ms2tl Год назад

Great apparently according to FABER , front flap down then push lights on a spring clip down Hope this helps anyone else ,thankyou again 👍

@4cats2008 Год назад

I'm sitting here with a bloody thumb from trying to insert a new bulb that broke when pushing it into the socket. I've never had such difficulty before. I got the burnt out bulb out, but one pin remained so got that out using needle-nose pliers. But now I can't get the replacement bulb in! Despite gentle pushing & wiggling - it just won't go in. I never had this issue before so I pulled out a working bulb from another cabinet puck light & compared it to the burnt out bulb & they match. Then, when I tried to replace the good, working bulb back into it's socket, it too won't go in!! There must be a trick I'm missing. Is it possible that once removed, they can never go back in? That seems silly but have to ask as now I have 2 cabinet sockets with missing bulbs as can't insert them! I'm so frustrated I put call into our electrician but that'll take time. I hope someone can help. I have a pack of new replacements, but the pins on that package are just a tiny bit longer which seemed odd so now I wonder if this exact bulb is also make with slightly (and I mean ever so slightly - less than 1 mm) longer pins?? The spacing between them is 4mm so I assumed all G4 12v 20w T3 bi-pin bulbs would work. Tks for any tips!

@How-to-repair Год назад

I'm sorry to hear it drew blood. I can only go by what you have described as I do not have the appliance in front of me to me. It sounds like you may have damaged the location lugs in the holder. It may be easier and cheaper for you just to replace the light fitting. I'm sorry I can't be any more assistance without having the appliance in front of me. Have a great New Year. Please remember to subscribe to the channel

@richardk7379 2 года назад

These bulbs stop lighting even when they are not burned out. I often have to move them back and forth to get a connection. Does anyone know of a way to keep the prongs connected? Is there some kind of fluid that can keep the prongs conducting electricity? Very frustrating.

@How-to-repair 2 года назад

try a smear of grease on them only to create conection Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you

@khairulTechnician 2 года назад

Bro, Collab korega kya, mai bhi technician hu 🙂

@Aengus42 2 года назад

"Just gently wriggling the bulb and gently slide in" Haha! Yeah, right! Those sockets are the most oversprung, tight, poorly designed lamp sockets in use today. Also, that little halogen bulb is so fragile! In that any sideways force on those pins leads to the glass breaking & making the bulb useless. I watched this video hoping to learn "the nack" of how to use this god awful socket. But nope, we're advised to just "wriggle it in"! Best tip is that these bulbs are much cheaper on eBay. Then the few you break trying to get them in won't cost an arm & a leg! I've replaced mine with long lasting LED versions. Then the lamp will outlast the cooker! Just put "12V 20W LED G4" and you'll see them. Sort by lowest price + postage too, for best economical results.

@How-to-repair 2 года назад

Well I tried to explain it as best as I can for the consumer yes they are very tight sockets but you must admit if you take your time and slowly wiggle the bulb it will come loose. Will someone that knows this so well you must be trade I hope you found the video useful for anyone that you wish to pass it on to

@DenisAhmet Год назад

LED all the way, I was forever changing halogen ones - Must be about three years I changed them to LED, no blow outs at all. It is quite a fiddly job and awkward to get too, but you can also prize open the whole unit out, then it makes it easier to work on.