No video :(

How to replace a Flymo motor and drive assembly on a Flymo Turbo Compact 330

Подписаться 155 тыс.

Просмотров 76 тыс.

50% 1

For all your lawnmower motor spare parts go to:
www.espares.co...
In this video, Helen demonstrates how to replace a genuine Flymo motor and drive assembly on a Flymo Turbo Compact 330 electric lawnmower:
www.espares.co...
Want to skip straight to the information you need? Here's what we talk about in each part of our video:
0:00 Introducing the video
0:27 Why the motor and drive may need replacing
1:13 Removing the handle from the lawnmower
1:25 Removing the lid, grassbox and motor cover
1:48 Unwiring the motor
2:06 How to remove the blade, spacers and the impeller
2:26 Suggested video: Important Safety Checks For Your Lawnmower
2:27 Removing the base of the lawnmower
2:51 Removing the old fixing screw, dust cap and belt from the ole motor
3:20 Fitting the components on the new motor and drive assembly
4:54 Putting the lawnmower back together
5:12 Suggested video: How to Clean Your Lawnmower
Thanks for watching!

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@kvppvk 11 лет назад

Excellent, thanks! Will use your company.

@chopchung 6 лет назад

after she has removed the screws @2:50 the wholr motor/drive assembly seperates away. I have done EXACTLY what she has done but, although half the drive is now loose, the far end of it and the motor are STILL rock solidly in place!!. Is there some other screw that she has not mentioned?.

@suefanthome7495 5 лет назад

there is one screw further up near the front ( she does point to it but the video does not show her removing it. If you have an old hover there may be grass covering the screw.

@Tsamados 2 месяца назад

I just replaced the drive assemble on my Flymo 300v. When I now start it, it makes a really high pitched screaching noise for the first few seconds before then operating normally. Could it be that the belt is slipping or maybe rubbing? Also before I put the new drive assembly on the drive wheel didnt rotate freely like it does in this video, should i be concerned about this?

@robertmorris2899 Месяц назад

It is usual for the screech when you start it up.

@Tsamados Месяц назад

@@robertmorris2899 this screech wasn't normal. I found out the part was faulty. The drive wheel was really stiff and causing massive strain on the motor to get it moving, it nearly burnt out in the process. I've returned the part and am waiting for a new one.

@chopchung 6 лет назад

@3:03 on the very far left of the drive, is that a screw hole she never mentioned???.

@bobbybuzzbomb 9 лет назад

The lid doesn't come off so easily as in vid it appears to be held by 2 lugs and they don't want to come out any help out there? graeme

@eSpares 9 лет назад

+Graeme Gibbons A tip we use when we do not have great information is to look up the case parts. From there images it sometimes shows hidden fixings or screw holes that become obvious when you return to the device. :-)

@bettypalava4985 8 лет назад

its not held in by lugs (thats what I initially thought too), there is a single extra crosshead screw which you access (hidden) on the front of the main skirt (grey part not the oaring top)