Тёмный

HOW TO REPLACE A MERCRUISER BRAVO 3 OUTDRIVE PROP SHAFT SEAL 

Keys Boating Channel
Подписаться 11 тыс.
Просмотров 23 тыс.
50% 1

In this video we show you how to replace a Mercruiser Bravo 3 outdrive prop shaft seal. Our outdrive prop shaft seal lasted 19 years, and was leaking gear lube oil. In this video we'll show the problems we encountered changing our Mercruiser Bravo 3 prop shaft seal, and see what we found inside the Bearing Carrier! Our Mercruiser Bravo 3 outdrive has been very good to us, and it gave us 19 years of great service. Replacing our Mercruiser Bravo 3 outdrive Prop Shaft Seal was an 8 out of 10 in difficulty. We are not mechanics, and this is how we did it. Hope this video helps, and thanks for watching!
PRODUCT LINKS:
Mercruiser Bravo 3 Prop Shaft Seal: amzn.to/41YPI7E
Bearing & Seal Driver Set: amzn.to/3ZHpDb3
Bravo 3 Bearing Carrier Wrench: amzn.to/44gIkVL
Outdrive Gear Lube Pump: amzn.to/3SSFiC4
1 7/16" (1/2" Drive) Socket: amzn.to/41PyIAm
Allen Wrench Set: amzn.to/3IS2V9p
Bravo 3 Prop Nut Socket Tool: amzn.to/3ZF6Hd5
1/2" Drive Torque Bar: amzn.to/3JdBp7O
Quicksilver 90 SAE Gear Lube: amzn.to/3Yw8O24
4.5" Vise: amzn.to/3kQLHkS
Prop Shaft Service Video: • BOAT PROPELLER - Servi...
Sea Trial Video after Seal Replacement: • SEA TRIAL & 1ST VISIT ...
If you have any questions or comments, leave them in the comment section below. Hope you like our videos, and please Like & Subscribe!
WAYS TO HELP SUPPORT OUR CHANNEL:
1. $uper Thanks Above
2. Buy Our Merch at: www.keysboatingchannel.com/Me...
3. LIKE, SHARE & SUBSCRIBE to Our Channel
Thank you so much for your support!
SUBSCRIBE TO OUR CHANNEL:
Click the Link to SUBSCRIBE Now! its FREE! bit.ly/3uudPKh
OUR MERCH STORE:
Check out our merch store, and help support our channel. Check out Our New KBC Official Hats, and be part of the Keys Boating Channel family, See the link below to enter our merch store!
www.keysboatingchannel.com/Mer...
CONTACT US:
keysboatingchannel@gmail.com
OUR WEBSITE:
www.keysboatingchannel.com
OUR FACEBOOK PAGE:
/ keysboatingchannel
OUR INSTAGRAM:
/ keysboatingchannel
OUR PATREON PAGE (HELP SUPPORT OUR CHANNEL):
Become a Keys Boating Channel Patron! Your support will help our channel grow and bring you more how to, and entertainment videos. To join now just click on the following link: / keysboatingchannel
BOAT U.S. (BOAT TOWING SERVICE) HIGHLY RECOMMENDED:
We use BoatUS every time we go Boating, never leave home without it! Better to be safe than sorry! I've been boating for 49 years, and take it from experience, you'll be happy you have it! and for a low yearly membership payment you'll have that PEACE of mind so you can enjoy your day boating. For more info click on the link BoatUS Link: bit.ly/3uRycRP
DISCLOSURE : Keys Boating Channel may have an affiliate Links and/or other material connection to any person or businesses mentioned in or linked to in the content above, and may receive commissions from purchases you make on these websites.
SONGS:
(Intro)
Beach Party - Islandesque by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
#bravo #boating #propshaftseal #outdrive #floridakeys #mercruiser #keysboatingchannel #islandlife #boatinghowto #keysbesthangout #propshaft #taverniersandbar #saltlife #sandbarlove #keysbestsandbar
00:00 Introduction
00:48 The Problem
02:15 The Tools & Products We used for this Project
03:35 Removing the Dual-Props
08:53 Outdrive Lube Oil Extraction
10:01 Bearing Carrier Removal
14:52 Removing the Old Prop Shaft Seal
17:25 Installing the New Prop Shaft Seal
20:01 Reinstalling the Bearing Carrier
22:35 Reinstalling the Props
24:54 Completion
25:47 Credits & Outro

Развлечения

Опубликовано:

 

1 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 56   
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Replacing our Mercruiser Bravo 3 outdrive Prop Shaft Seal was an 8 out of 10 in difficulty, but it can be done on your own and save! We did a test run today and everything worked PERFECT. No more leaks! Don't forget to LIKE & SUBSCRIBE today. Thanks for watching! Peace!
@ramsesmartinez6645
@ramsesmartinez6645 Год назад
What about the small seal at the first prop I can’t find videos of it
@2BearsOutdoors
@2BearsOutdoors Год назад
This video is going to help many with same of similar styles inboard boats. The the intro, and your creative editing skills is off the charts. Great information and enjoyable to watch. Big hugs brother
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Thanks so much my Brother! Blessings! Peace!
@sirDirtyHarry
@sirDirtyHarry 9 дней назад
Thank you for this video
@KeysBoatingChannel
@KeysBoatingChannel 9 дней назад
You're Welcome! Thank you for watching our video! Peace from the Keys!
@kbgking7921
@kbgking7921 Год назад
I’m about to try this on my 2000 bayliner 2855 with Bravo III. Thanks for making the video! Looks pretty straight forward, might spring for a new carrier assembly
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi! Thanks so much for watching! Yes, its not too difficult, just take your time with it. Yes, I will probably replace my carrier next time I do this service. The last seal lasted 19 years..lol. Peace!
@user-qs6vj7xx5u
@user-qs6vj7xx5u 4 месяца назад
Brilliant video, thanks for a great tutorial, very helpful
@KeysBoatingChannel
@KeysBoatingChannel 4 месяца назад
Thanks so much for watching our video! Glad it helped you. Peace from the Keys!
@xersis31
@xersis31 Год назад
A LENGEND is what you are thank you so much
@KeysBoatingChannel
@KeysBoatingChannel Год назад
You're welcome! Thank you so much for watching our video! Peace from the Keys!
@LuisGonzalez-ru5xw
@LuisGonzalez-ru5xw Год назад
Excellent video Jorge. A lot of great information.
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Thank you so much my Brother! Oye, is the Hakuna ready to hit the sandbar? Can't wait to meet up! Thanks for watching Bro! Blessings! Peace!
@xersis31
@xersis31 Год назад
Just did mine today!!
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Awesome! Thanks so much for watching our video! It's been several months since I did mine, and it's working great. Peace from the Keys!
@kranzyboy869
@kranzyboy869 Год назад
Thanks so much for this video! Helped me right thru this job! Had issues like you did getting the seal carrier out of the thing! Man it took a lot of careful banging to get that thing out but I got it out and got the new one back in the same way you did! I would also recommend replacing the O-ring as well which I did. Thanks again great video!
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi Chris! Glad this video helped! Yes, the o-ring should be changed also, just did not have it when I did the job. Thanks so much for watching Bro! Peace!
@raidyayala2942
@raidyayala2942 Год назад
Good job captain
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Thanks for watching! Peace!
@ramsesmartinez6645
@ramsesmartinez6645 Год назад
Best video ever seen very helpful ,informative and detailed thank you make more videos is saving a lot money for me
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi Ramses! Thank you so much for your comment and support! We are happy to hear our videos helped you out. Brother Happy Boating! and Peace from the Keys!
@markdimaio8396
@markdimaio8396 Год назад
Great work and great video. Your Bravo 3 is in excellent shape as well as your bearing carrier. You're the exception not the rule. Obviously you took great care of it.....good to replace that rubber O ring in the aft section of the bearing carrier.
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi Mark, Thanks Bro! Yes, I just did not have it, but I will be replacing it soon. Thanks so much for you comment and support! Blessings! Peace!
@RandomlyAwkward1
@RandomlyAwkward1 Год назад
Great job on your tutorial. I am tackling this repair next. I just keep adding gear lube for now, but at $20 a quart, it gets old fast!
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi! Same thing with mine, since I did the replacement no more adding lube oil and monitor alarm going off. Thanks so much for watching our video! Happy Boating! Peace from the Keys!
@michaelrippon870
@michaelrippon870 10 месяцев назад
Awsome Video........ Well done!!!
@KeysBoatingChannel
@KeysBoatingChannel 10 месяцев назад
Hi Michael, Thanks so much for watching our video! Thanks! Peace from the Keys!
@texasdependablehomeinspect9
@texasdependablehomeinspect9 6 дней назад
Hey there, GREAT VIDEO! Super helpful. I cant find the link with all the tools and supplies. I can list the tools you mentioned in the video, were there any other items used tgat you did not mention? Again, SUPER. HELPFUL video. And yes i have liked and subscribed.
@KeysBoatingChannel
@KeysBoatingChannel 6 дней назад
Hi, thanks for watching our video! Glad it helped. Here's the links for all tools: PRODUCT LINKS: Mercruiser Bravo 3 Prop Shaft Seal: amzn.to/41YPI7E Bearing & Seal Driver Set: amzn.to/3ZHpDb3 Bravo 3 Bearing Carrier Wrench: amzn.to/44gIkVL Outdrive Gear Lube Pump: amzn.to/3SSFiC4 1 7/16" (1/2" Drive) Socket: amzn.to/41PyIAm Allen Wrench Set: amzn.to/3IS2V9p Bravo 3 Prop Nut Socket Tool: amzn.to/3ZF6Hd5 1/2" Drive Torque Bar: amzn.to/3JdBp7O Quicksilver 90 SAE Gear Lube: amzn.to/3Yw8O24 4.5" Vise: amzn.to/3kQLHkS
@texasdependablehomeinspect9
@texasdependablehomeinspect9 6 дней назад
@@KeysBoatingChannel FANTASTIC!
@felixcaceres4051
@felixcaceres4051 Год назад
Fantastic channel brother...the Keys look amazing and I might just retire there after seeing your channel. I just purchased a 2006 Bayliner 285 so I've watched all of your maintenance vids. I'm in Chicago so I'll be cruising Lake Michigan. We don't have sandbars like you do :(
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi Felix! Thanks so much for your support, Bro! After owning my 285 for 18 years, I still love it. Hope to have you as a neighbor in the Keys. Enjoy your 285 Brother, Happy Boating! Peace!
@dirtysouthbeatbox5065
@dirtysouthbeatbox5065 Год назад
Fantastic video tremendo trabajo, it’s always great to have peace of mind that everything is functioning properly. 🏝🌴🏝🌴👌🏽💥💥💯💯✌🏽 Superb
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Thank you so much Bro! Blessings! Peace!
@sjd7188
@sjd7188 6 месяцев назад
Some heat helps to get the restrainer and bearing carrier off. Also so does soaking with Kroil or other better penetrating oil . The heat makes a huge difference
@KeysBoatingChannel
@KeysBoatingChannel 6 месяцев назад
Hi! Thanks for watching! Yes, this is great info that can help everyone doing this service. Thanks for your comment. Peace from the Keys!
@glenngray1201
@glenngray1201 2 месяца назад
This video is how you get a like 👍 and subscribe ! Well done …
@KeysBoatingChannel
@KeysBoatingChannel 2 месяца назад
Hi Glenn, Thanks so much for watching our video! Thanks! Peace from the Keys!
@danielbodurian9612
@danielbodurian9612 8 месяцев назад
Great Video. What is that metal bar on the side of the outdrive? is that to protect it?
@mattm9915
@mattm9915 2 месяца назад
It's a drive shower. Sprays water on the top side of the drive to cool it
@MichaelMonsos
@MichaelMonsos Год назад
Great video and instructions, did you have replace what looked like a o-ring on the outside of the seal carrier or is it unimportant?
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi Michael, thanks for your comment. We reused the same one on there, but may change it on my next prop service. It looked in good shape no nicks, or cracks, we did removed it to clean out all of the broken pieces of shells. So far its working great. Thanks for watching! Peace!
@markdimaio8396
@markdimaio8396 Год назад
Its very important since it keeps the water out and oil in. I replaced mine its about $1.25 for the OEM O ring.
@mchaves7663
@mchaves7663 Год назад
Did you have any issues with removing the screw at the bottom of drive to drain oil? Mine seems very stuck. Thanks for the video
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi, thanks for your comment and watching our video! No never had any problems with the drain screw. But to make it easy to remove, just put a good size screwdriver and tap it a few times with a hammer and then try turning it... this always works for me. Thanks! Peace!
@kannanvembayamthiruvandapu2393
You can send tool part number oil seal removing tool
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi, Thank you for watching our video! All the tool links are in the description of this video. Peace from the Keys!
@harollopez7586
@harollopez7586 8 месяцев назад
I have same problem do you come to miami my boat is in homestead ?
@KeysBoatingChannel
@KeysBoatingChannel 8 месяцев назад
Hi Harol, thanks for watching our video. What outdrive and engine do you have? Peace from the Keys!
@harollopez7586
@harollopez7586 8 месяцев назад
@@KeysBoatingChannel 350 mag bravo 3
@jimzeleny7213
@jimzeleny7213 Год назад
Buy (and use) a brass hammer to avoid damaging your expensive tools.
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Hi Jim, thanks for the recommendation! I will be buying one and keeping it in my van. Thanks for watching our video. Peace!
@2BearsOutdoors
@2BearsOutdoors Год назад
😎👍🔥🔥🤙❤️❤️❤️❤️❤️❤️
@2BearsOutdoors
@2BearsOutdoors Год назад
Also love how you ended you video... You're 🔥🔥🔥🔥🔥 Hot with your creative thinking.. always enjoy your videos.
@KeysBoatingChannel
@KeysBoatingChannel Год назад
Thanks Brother! Peace!
Далее
Bravo 3 outer prop shaft seal replacement
11:01
Просмотров 16 тыс.
▼КОРОЛЬ СОЖРАЛ ВСЕХ 👑🍗
29:48
Просмотров 464 тыс.
Replacing outboard oil seals the hack way
21:50
Просмотров 1 млн
How to do Maintenance on Bravo 3 Prop
10:47
Просмотров 101 тыс.
How to Repair and Replace Bravo III Out Drive Part 2
7:41
How To Engine Swap a Sterndrive Mercruiser Boat
41:59
Просмотров 144 тыс.
It worked for me)
0:19
Просмотров 23 млн
Czn Burak vs Argenby Which sigma is better?
0:19
Просмотров 15 млн