How To Replace A Release Bearing On a Citi Golf 

Can't wait for you to get the cam and show those velociti who is boss

Thanks bro I managed to do mine cz if your video much appreciated

is it possible to remove the clutch push rod and replace it here while were at it ? or does the transmission have to come out to replace that rod

I have a very very similar sound on my Golf mk4, and it uses an old type of transaxle like in your video, where the release bearing is outside of the box. The sound only appears when the car is completely stopped and clutch is not pressed, when i press it sound goes away. A very small movement of the car mutes this sound as well. I called a mechanic to ask what the problem is and he said it must be the input shaft bearing. Maybe you will know what the problem really is here? Very good video!

Dankie may bru..... I've learnt something

Does any gearbox oil leak out? Took the cap off mine a tiny bit and oil started to leak out so hit it back on as have no oil and didn't want to take it off incase I needed to refill it. Cheers

What engine was your friends 1,4 golf did he change the engine to a 2l or change cam bro

Thanks I learned something, know if you can teach me to install new clutch. Regards Markus

My clutch pedal is too soft,I have tried many times to adjust it but it become stiff , what could be problem ?

Hi boss my mk1 golf just didn't get clutch yesterday my arm by the gearbox where the cable was loose and when you use push in the clutch it was loose like the cable is broken but it's not can you help please

Golf is great way to always make content cause they always got problems😂

Hi bro is it 5 speed gearbox or 4 ?

How much did you pay for a new release bearing bru?

We got the cap off on my daughter's golf and also clutch cables, but we can't get the clutch lever to drop. How do we do this?

So I don't need to open the gearbox like someone suggested? Also the pedal is way too close to the floor, can't engage gears without a struggle

easy fit ngls ...want to do this on my polo myself

What are the signs of a bad release bearing? Gears crunching?

Going through release bearings every second month from goldwagen smh... Just one yesterday and making a noise the next day. I'm pissed

how its possible i had that transmission on my mk3.5 cabrio

Eish bru what bolt was loose. I had the same noise on my box i changed release bearing but i have that exact noise

need that rubber bushing for the clutch cable, gonna cut your trans is half.

My push rod is pressed how I removed it

How to replace clutch push rod

thanks bros i get it

oooo one of those simple things but a bladdy pain to replace yoh i thought now i know how to do one.. You need to do an oil change on that gearbox bru that box dont sound right.

I changed mine but still there's a noise n my gear are hard to get in

Looks like your gearbox is dry, top up your fluid asap

push rod should be changed as well

Bring back the Sentra man #Yoda

Shhhhweeeet

Hi

That box needs oil