How to Replace a Trailer Leaf Spring | Double Eye Spring Installation

Подписаться 3,2 тыс.

Просмотров 306 тыс.

50% 1

How to Replace a Trailer Leaf Spring | Double Eye Spring Installation on a Single Axle Utility Trailer. In this video we show you how to replace the leaf spring while the axle is still on the trailer and with the axle off the trailer.
All our Specs are Based on Rockwell American Products. See the Operation Service Manual for Rockwell American Axles Here.
www.johnsontrailerparts.com/o...
If using a different Brand of products, Check their specifications.
In the video we installed the nuts for the hanger bolts on the outside, this was done to show you a better view of the installation and we have plently of clearance to the tires so the hanger bolt wont hit the tire even under a heavy load. Typically the nut is fastened on the inside.
Note: This video is used for guidance only, Always refer to the manufacturers installation instructions and specifications.
www.johnsontrailerparts.com/
IG: @johnsontrailerparts
Video Edit by Antix Media Productions.
Visit: www.antixmediaproductions.com/
Follow: @Antix_productions
IG: antix_productions
#diy #diyprojects #leafspring #trailer #build #fixit

Хобби

Опубликовано:

16 фев 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@johnsontrailerparts Год назад

Need a new hanger kit for your trailer? Check out kits here: johnsontrailerparts.com/product-category/trailer-axles/axle-parts/hanger-kits/ We also off the U-bolt kits. johnsontrailerparts.com/product-category/trailer-axles/axle-parts/u-bolts-kits/

@moisesgarcia267 Год назад

Johnson: what metal can you recommend to make an ecxel for a cart to carry 500 pound..and the ecxel of 3 feet long...thanks for your videos

@shawnwallace29 2 года назад

Thank you for this video. I had a leaf spring snap on me today. Nothing major happened, thank God. You're video made it easy for me to take this task on myself for $90 versus needing a tow and paying someone else to repair my work trailer for almost $500 plus being down for two days. I only missed half of a day of work and I now have the confidence to make a few other repairs. (To the peanut gallery: maybe you should try maintaining your equipment better. My utility trailer is almost 5 years old and on the road 5-6 days a week, 50-100 miles per day. While I did have rust, I didn't bust my knuckles or have to cuss or become a specialized mechanic. This video was intended for someone like myself, as an informative and teaching TUTORIAL.) THANK YOU TO THE CREATOR!

@dcrican762 2 года назад

SUPER EASY WHEN YOU ARE REPLACING NEW ONES WITH NEW ONES. NOTHING RUSTED

@007MRnicholas 2 года назад

🤣

@michaelc9128 2 года назад

Yea I was thinking the Same

@albrownmd 2 года назад

Use an impact wrench to get them loose. And spray with wd40 a day before

@jessecox4445 2 месяца назад

Just cut the u bolts and replace

@hakaisayianz7000 2 года назад

Great tune brother

@Angelicaolguin100 2 года назад

you make it look so easy

@georgevg5720 2 года назад

Muchas Felicidades Joven Por Su Canal. Saludos Cordiales Desde Mazatlán, Sinaloa, México. ..

@MaxF01 4 года назад

Great video!

@johnsontrailerparts 4 года назад

Glad you enjoyed it

@StationaryNomad361 3 года назад

Thank you man. I’m building a barbecue pit on a trailer and having to build the trailer from scratch. Nice to see how the process looks

@ttowen02271 3 года назад

Right I had to cut mine lol

@johnsontrailerparts 3 года назад

No problem 👍

@kayagraegracelaneyfalkenma8497 2 года назад

This shizZt awesome Is like I just went to work an entire practice session of hrs time , Now to begin my leafspring job tomorrow w experience like eye 👁 Done ✔️ did 👍 Thanks

@jeffvalley67 3 года назад

Really good video, thanks! As I was putting the new springs on and tightening them, I wondered if I should really tighten them. If I did, the shackles wouldn't move and this video confirmed to not over-tighten. I have a 3500 pound trailer and broke a spring while driving, what a nightmare! The new springs I got are 2000 pounds each, 4000 pound total, so I think I'll feel a bit better. I was not overloading the trailer, no idea what happened but it was not fun. Thanks!

@johnsontrailerparts 3 года назад

Your welcome, let us know if there is any other how to videos you would like to see.

@ericvilla6286 2 года назад

You're right sir! The bolts go on snug and not torqued. If the spring had a rubber bushing instead of a plastic sleeve, then you would apply a specific torque value to the bolt/nut.

@EmMa-es7fc 2 года назад

Thank you.

@relationshipsgrowth 3 года назад

nice one

@jimtatsch3544 2 года назад

I notice there is a hole in the center (in addition to the 4 holes 9n the cornets) of the spring attachment plate. Do i remove the bolt holding the leafs together and pass it through said center hole?

@slabexpress3837 2 года назад

The Kid in the video put the bolts on the hanger Backwards with the threads facing the tires. This can cause the the threads to dig into the tires very unsafe!!

@GOASTWRITTER 2 года назад

Do you need the shackles? Because mine doesn’t have them. And if I need them do they go on the front or back of the trailer?

@bakervinci163 2 года назад

Front one first. Makes sense

@brownrecluse3772 4 года назад

Great video! Is the purpose to give it more ground clearance?

@tznutz4824 4 года назад

Lol! No, the purpose of it is to show you what it would look like put together new. Most if not all these DIY videos don’t even explain the functionality of what they are replacing. 🤦‍♂️

@yourhucklebearer9451 3 года назад

Flip the axle for more GC.. Dat.... Dats WHUT I THINK..

@eduard7811 3 года назад

Hola que medida tiene los muelles , largo y ancho , y cuánto peso soportan

@hectorrendon5313 2 года назад

How do you do a c leaf?

@Tsiri09 3 года назад

I'm brand new to trailers, so this is gonna sound like a stupid question. the bracket that's attached to the trailer is only held on by a weld? There are no bolts for added strength?

@nicolathonathan770 3 года назад

Yes, it’s weld on their. And weld joint is a lot stronger than bolted joint.

@pdlegend6829 4 года назад

This is a nice video, however, the real job is to do it on a trailer that is completely rusted out with rounded off bolt heads you can't get. Anyone can do it with brand new parts!

@ilovebrooke44 3 года назад

Haha haha I just experienced this comment today

@gschady 3 года назад

what if the frame is painted red .. how would you do it if the frame was red .. WOW

@pdlegend6829 3 года назад

@@gschady it's not possible to do at all if it's red

@bowl830 3 года назад

i know right!!! wasn't realistic without the tool throwing and busted knuckle cussing .

@christianclark347 3 года назад

Kinda easier then. You just skip the wrenches and go straight to the cutting wheel.

@taptap17 Год назад

On my single axle trailer I just have the leaf springs going to the brackets am I supposed to have one end with shackles on it

@johnsontrailerparts Год назад

Typically you want the shackle brackets on the rear of springs. This allow more flex in springs

@rotfan77 11 месяцев назад

How much torque did you put on the bolts on the leaf springs? I only saw the torque on the U bolts, unless I missed it? Thanks

@johnsontrailerparts 11 месяцев назад

on the suspension bolts you do not torque down, Behind the head of the bolt it has splines to lock the bolt in and keeps it from rotating. The nuts are lock nuts and you would tighten them down to leave about a business cards width in-between hanger and spring. This small gap allow the suspension to move freely. If you torque them down tight this would bind the suspension up.

@maryhinge5003 Год назад

Hi there, where abouts did you position the jack to lift the trailer and do the shackle with the axle still attached?

@johnsontrailerparts Год назад

You want to make sure trailer frame is held up with jack stands, then using jack to support axle as you replace the shackles.

@pacificformula 4 года назад

I’m trying to replace the hangers on my boat trailer but they sold me different size hangers for the front and rear, is that correct?

@michaeldmorrison 4 года назад

Yes, you can kinda see in the video, the front brackets the entire leaf spring fits into, the rear brackets are about the same width as the leaf spring so the shackle straps will line up correctly.

@richardsimon5945 2 года назад

Great video, but I wouldn't recommend wearing slippers to do this type of work.

@user-yg4zo8ex3i 4 месяца назад

Can I replace just the centre bolt in the spring

@johnsontrailerparts 3 месяца назад

Yes, if your asking about to bolt that holds spring pack together. Just make sure to use proper bolt length for your spring pack. Typically if that bolt is rusted off. I would recommend replacing the springs.

@nathanurick8320 3 года назад

You should have replaced the plastic bushings with brass

@cocooffroad651 3 года назад

Does the shackle lift the trailer?

@gschady 3 года назад

inflate the tires with Helium to raise the height

@jackadamz3 3 года назад

@@gschady Jackass

@charlesmiller3134 4 месяца назад

Plastic bushings?

@johnsontrailerparts 4 месяца назад

They are a teflon bushing

@floridacoder 3 года назад

My leaf springs snapped, and I'm going to replace. I have a 5000lb axel and 27 inch eye to eye - and it didn't use a shackle. I couldn't find 5000lb at 27 inches, just at 25 1/4". So I'm 1 3/4 inch shy. My plan is to simply use a shackle to make up the difference. But I'm starting off at an angle, not 90 degrees. The higher the rise, the shallower the angle. And inverse that for a lower rise. I think it's a small enough gap that I don't anticipate any problems in the wheel well. What should my strategy be here? Higher rise and lower angle, lower rise and steeper angle, or keep searching and order exact fitting springs?

@adamavelar2691 3 года назад

That's what i have. But thought all trailer springs were 25 1/4

@hitmenext1182 3 года назад

but how do you do the other side?

@gschady 3 года назад

find a left-handed friend to hold the tools in the opposite hand or have a woman do it .. everything they do is backwards

@dmc31405 8 месяцев назад

Good video. The music is annoying, Had to mute it before I lost my mind.

@superwag634 Год назад

You really should put washers under nuts. And shifter? Far out 🤷‍♂️ 😂

@johnsontrailerparts Год назад

The hanger kit hardware do not require washers as the bolts are splined to keep them locked into position and the nuts are lock nuts. When tightening down the suspension hanger bolts they are not torqued down as you need to allow movement for suspension so it does not bind.

@geyser3445 3 года назад

You are allowed to talk.

@thomasbullivant7717 3 года назад

1st and most importantly is safety.learned that in junior high shop is always wear safety glasses.none of em in the video is wearing em.BAD example.

@grantdevenney7078 3 года назад

Also should not be wearing open toed slip on shoes! Break a to real quick that way.

@gschady 3 года назад

Crazy Russian Hacker is that you? ".. Safety is #! priority!"

@slappy2825 2 года назад

I don't sit with my legs under the trailer while its jacked either. Its a minor point maybe, but if the jack or stands give way for any unexpected reason, I don't want my legs anywhere under the trailer.

@CazaYCocina 4 года назад

Excellent video !!

@thomasbullivant7717 3 года назад

Guns save lives .?your an idiot and a coward for thinking that.its makes you feel tough with a gun.lol.i was raised to respect firearms.people getting their 1st gun as an adult don't have a clue.you ll find out the hard way.jackass

@bakervinci163 2 года назад

Front one first. Makes sense