Тёмный

How to Replace a Water Shut Off Valve Under Sink | Water Leaking from Supply Valve 

HouseBarons
Подписаться 67 тыс.
Просмотров 80 тыс.
50% 1

We discovered a 20 + year old water stop valve that was leaking under our bathroom sink. Since trying to find a universal valve repair kit is quite difficult, we opted to replace the leaking supply valve.
We used a Watts Aqualock push fit valve to speed the repair. Check Amazon for that and similar water stop supply valves:
Watts AquaLock (3539-10)- Large Diameter Stop Valve/Shut Off Valve- 1/2" CTS/Single
amzn.to/41F1bt5
Watts
959098 Aqualock 3539-10 (P-650) Straight Valve, 1/2"
amzn.to/3tmB5P3
A similar product is made by Sharkbite :
SharkBite 1/2 x 3/8 Inch Compression Straight Stop Valve, Quarter Turn, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 23037-0000LF
amzn.to/3vpyzZ6
The process takes a littletime but is straight forward. Sink water supply shut offs will vary. Ours had a 3/8 inch copper line from the top of the shut off valve to the faucet. At the bottom of the shut off valve, we had a 1 inch copper pipe. Both ends of the existing supply valves were compression fittings.
THANKS FOR WATCHING!
Also, if you are in the market for any tools, check out our Amazon store front or the links below.
Visit our amazon store front for our recommendations for tools and supplies for DIY success!
www.amazon.com...
If you click on any of the listed amazon links there or in this description and buy, we thank you for helping us out as a channel. We are Amazon affiliates and can earn from qualifying purchases and no extra cost for you. Thanks for the help in supporting our channel and enabling us to keep us making videos!
#plumbingleak #waterleak #watershutoff

Опубликовано:

 

30 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 43   
@Sarbet888
@Sarbet888 2 месяца назад
Lowes canceled the installation because they did not know how to pull it up like you did. I was going to call a plumber before I found your channel; now, I will install my dishwasher myself. Thank you!!!!!!!!!!!!!
@Housebarons
@Housebarons Месяц назад
Good to hear! Way to go!
@Tony-q4f3t
@Tony-q4f3t 9 месяцев назад
Instead of cutting the ferrule or copper pipe , use a Ferrule Puller to remove the compression ring .
@Housebarons
@Housebarons 9 месяцев назад
Nice tip - thx!
@TradBarbie
@TradBarbie 3 месяца назад
*"OLDER houses"* 😂😂😂 I'm laughing in my 200 year old house. I wish I was joking. The stuff in my house doesn't exist anymore 😂
@Housebarons
@Housebarons 3 месяца назад
Hey Trad…, Wow! 200 yrs - that’s awesome. I feel your pain too!😃
@TradBarbie
@TradBarbie 3 месяца назад
@@Housebarons it's STILL leaking and I've tried 80 things 😂
@TnT-bl2yo
@TnT-bl2yo 6 месяцев назад
Im having this exact problem now and i just discovered that its my valve and seals…thank you for your clean informative video. I have to fix mine today after work
@Housebarons
@Housebarons 5 месяцев назад
Glad it helped
@Idreamoutdoors
@Idreamoutdoors Месяц назад
Before you go to the last resort of replacing the valve you can try tightening the packing nut first. Quite honestly this might have solved this persons problem.
@woodstream6137
@woodstream6137 Месяц назад
Get something called an olive puller - it uses the retaining nut to pull that brass ferule off
@MAC-gx3ji
@MAC-gx3ji 23 дня назад
Why not remove the ferrule from the upper tube like you did with the lower tube ?
@johnsmith6368
@johnsmith6368 5 месяцев назад
Nobodies gonna bring up that he left that old compression nut on the pipe below the new valve?
@ad-hj6ig
@ad-hj6ig 2 месяца назад
:)
@Denver.Don.303
@Denver.Don.303 2 месяца назад
I think it looks better plus it sounds like he’s the homeowner so if he doesn’t care it doesn’t matter
@PolskaBabii
@PolskaBabii Месяц назад
Question - what size copper pipe is that? I have been changing my valves and I am getting the same exact size valves you have and they are all fitting loose. I got sharkbites and those do work but why they be lose? Same size valve as the one I removed and the ones removed definitely were not loose. I cannot figure it out.
@Housebarons
@Housebarons Месяц назад
That is 1/2 inch copper pipe. The shark bites are made to spin around the pipe but made to resist pulling off - they do not slide off easily. When you turn the water on, go slow and look for leaks. Leaks mean -do it over. Thx for watching!
@Tacompton425
@Tacompton425 10 месяцев назад
I dislike those crap shutoff supply valves and have replaced all of mine with 1/4 turn quality valvles.
@TherealBigJohnSt33l
@TherealBigJohnSt33l Месяц назад
I’m about to do mine. Any pointers?
@gotaigo
@gotaigo 3 месяца назад
They have tools for compression rings removal
@ssjkuroki7776
@ssjkuroki7776 9 месяцев назад
what happens if the pipe is broken? Mine broke just minutes ago and it doesn’t stick out like in the video. Do you have any tips on what I can do or do I have to replace the pipe by calling a plumber?
@Housebarons
@Housebarons 9 месяцев назад
You can diy a pipe replacement… depends on how handy you are. RU-vid videos are very helpful. But If that is not in your wheel house - then handyman or plumber. Thx for watching!
@jkillahbocrew727
@jkillahbocrew727 7 месяцев назад
@@Housebarons😊 poop
@Anna-ww4pv
@Anna-ww4pv 6 месяцев назад
When should copper pipes be completely replaced?
@Housebarons
@Housebarons 5 месяцев назад
Copper lasts a very long time. They are also simple to repair. The only time we’ve replaced all copper pipes was when we purchased a house from a bank that didn’t winterize it. So the water in the pipes froze & split the pipes in multiple locations. We were chasing endless leaks inside walls. It might be worth replacing a small section under sink if you had a leak but throughout a house ? I’d keep them. Just my 2 cents. Thx for watching!
@carmenlombardi7955
@carmenlombardi7955 2 месяца назад
Just change the stem and cap repair kit.
@dianacarter3212
@dianacarter3212 3 месяца назад
Just saw a video where they have a tool to take that thing off.
@murdamylow
@murdamylow 5 месяцев назад
I turned off the water supply to the house and the hot water is still leaking. Do I have to drain my water heater to replace the hot water shut off valve under the sink?
@Housebarons
@Housebarons 5 месяцев назад
If you have sinks or pipes above the valve - then that might still be draining due to gravity, If your water heater is upstairs , I still don’t think it would siphon. Maybe let the valve drain into a bucket or pan, see if it eventually stops after the pipes empty… Hopefully that is what’s going on.
@murdamylow
@murdamylow 5 месяцев назад
Thanks! I have a one story house. I’ll try draining the water into buckets.
@ronda7340
@ronda7340 7 месяцев назад
Use a compression sleeve puller. Alot easier lol...
@Housebarons
@Housebarons 7 месяцев назад
Thx for the tip!!
@ronda7340
@ronda7340 7 месяцев назад
@@Housebarons you're welcome!!!! Lol....
@ramoncapiral6427
@ramoncapiral6427 День назад
why take out just put a new gasket
@dereksleeth4101
@dereksleeth4101 4 дня назад
Could have just put a new bib in it for 5.00
@timothyharrison564
@timothyharrison564 12 дней назад
Did I just watch ths
@mbrntly11
@mbrntly11 8 месяцев назад
Compression shut offs are the best shuts offs , i don't Really Trust Shark Bites
@Housebarons
@Housebarons 8 месяцев назад
I get ya. But s o f a r we have never had an issue. Thx for watching!
@timothyharrison564
@timothyharrison564 12 дней назад
Please don't do this
Далее
How to Replace a Leaking Shutoff Valve Under a Sink.
8:12
How to Install a Water Shut off Valve for Beginners
7:33
Toilet Wax vs Rubber: Which Works Better?
12:03
Просмотров 334 тыс.