How to replace an ignition lock switch 

Great video! Mine was sticking and didn't move well. I ended up taking it out and putting powder graphite (instead of WD40) in all the crevices to get it all loosened up. Worked very well. Thank you for posting this!

I got a assembled lock switch at the local parts store & installed it in my driveway in less than 2 hours thanks to this video! And I shared the savings with the original mechanic. Thank you.

Thank you for the video! It really helped me with my ram 1500's ignition lock cylinder, same basic procedure.

Great i was able to move the rubber shoursdaround the key witht out taking the toque bolt off the cover. Thanks!!

My son used the tilt steering to move the colum around. We only had to remove the two plastic covers over and under where the ignition switch goes.

Easy peasy!!! Thanks for this video!! Saved me some cash!!!!

thanks, this is the video that I needed to change mine in my 2006 dakota....PS old women backyard machanic lol

Great video. It worked for me all the way up to the 6:00 mark where your key magically turned. Mine did not turn. I flushed it with Electromotive Cleaner until it was no longer pouring out of the cylinder as a black fluid. Sprayed 3-in-1 Lock Lube, but it still will not turn. At this point should I just break or drill out the cylinder???

good video but a generally, most techs would try it first before a fully assembly, but good and helpful.

Rock Auto has a complete cylinder kit with all the wafers to key it yourself. No need to go to a dealer. Super easy repair.

Thanks brother you help me a lot

How do I take the ignition lock switch out of a 2006 Suzuki Forenza

i have a 200 grand caravan se it doing the same thing ur video doing but i have to fuss with it and it turns thank you for this video man... really. now i know wat to do to get it out befor it wont turn period

How do you do it without the key my kid threw it down the sewer had to have it towed home and dragged up in my drive way

if someone broke into my car and broke the steering lock do i have to replace ignition lock? the wheel turns and car turns on fine but steering wheel makes a jingle noise every turn

Do you think that this procedure would work the same for a 1998 dodge grand caravan or a 1999?

Thank you for this video

Replacement aftermarket priced @ $100; 97 Dodge van ~ need to find how-to video; I used Amsoil product this morning on 2 new keys cut from blanks that did not open side and back and now can open them - plan at the moment is to use screwdriver on ignition switch and retain keys for doors

You gotta modified the door locks as well if u have a car without keyless entry when u change the ignition cilinder right

yes the switch is wrong that may be the truck won't start.. i have a 98 3.3 caravan truck. When I turn it on, I only know the lights turn on. and the engine won't start. greetings from Sinaloa

thankyou so much it really helpme

IF YOU HAVE A CAMERA AND TAKE PICTURES STEP BY STEP, IT WOULD BE A HELP WITH RE ASSEMBLY. SOME LOCKS ARE DIFFERENT. .

The voice remaind me of stave jobs

how do i change lock cylinder if key is broke doesnt turn to on position

I'm guessing I got the ignition cylinder either stuck or I'm not pushing the right button because it's stuck halfway in, it'll turn a bit to the right and bit to the left but I can't pull it out.

Great video quality. What camera do you have?

I have a 1990 dodge caravan, it is diferent ignition lock cilinder, anibody could help me with a video to replace it?

Thanks bro

? My switch went bad and the key was stuck I know this vid is pretty old but anyhow I had to get the van started so I fought with it until I got that cylinder out But when I put the screwdriver in to start it a small brown plastic piece and a spring came out it started but wondering how important those are, before I buy a new lock cylinder..thanks

I have a 2000 Chevy suburban, I put the key in nothing happens... not sure if it's cylinder or ignition switch itself, don't know where to start

My key won't turn to the on position as one of the steps to remove, what do I need to do to get it out?

Thank you ✍️✍️

It looks easy?!?..My Odyssey ignition makes electric noise. Some people told me it's a good chance a loose wire.

Please help me too. I tried the same thing, but cant get silinder out. I lost my keys and dont have anything. Thatway change the locks. Cant change in finland cause the car have estonian plate nr and finland dont make keys if abroad car. Estonia service sayd they only male new key if my car there.

how to wholer out a ignition let 2# of key's swing around when your touring around!

I’ve lost my key what do you do if you can’t turn the switch to push in the little lock and release the ignition? I’m stuck trying to figure out what to do about it. Went to the dodge dealership they made me a key by the vin but I’m thinking the guy there didn’t do it right. I took it back and he said it was right but I’m doubtful he really did it right. Now I’m at the place that I want to just take the tumbler out and replace it but the key is not right so it won’t turn 🤷‍♂️

If the Switch is stuck how does it get turned to the on position during disassembly?

So someone tried stealing my 04 T&C, not only was the CPU fried so even if it didnt have the new ignition (where you can put a screwdriver in it and let it rip), it still wouldn't have went. But they took the ignition part out and theres copper coils everywhere. could i fix this at home? and if so, how? also what would be your estimate if i had to take it to the shop?(doesn't have to be spot on btw)

can anyone show me how I can program my 2005 dodge grand caravan key to my new steering column

I've taken everything apart, except because my key wouldn't turn to start my grand caravan I'm not sure how to get it into the on position to remove the old cylinder. Any suggestions? Thank you Wendy P.

great. ..what vehicle is that a 2000 Chevrolet Jimmy?

i have a 2000 Chrysler 300m. my key was stuck in the ignition. I've taken everything off and finally got the key out. but if I put the key back in and turn it, it will not come out. right under the switch is cable with a little plunger in it. if that is out of it's holder the key will go in and out of the switch. does anyone know what that plunger is called and what does it do?

if not in on position how do you take key cylinder out

What if I no longer have the key, that's why I'm replacing it! Lost keys!

How to cheak relay fused on a2005dodge chearakey

Remove the Fluffehness from that battery-post!!!!!!!!!!!!!!

hi Emma

alguien suba el vídeo como cambiar luces peugeot 505 parte tracera y el suwip de arranque

how do u do it with no key

Dude clean your battery’s polls....

This witch types of care

Replace ignition switch 85 dodge car

Thats obveously a plymoth voyager,not a dodge

strate from the hourses' mouth

why are you whispering

,9i

how do i change lock cylinder if key is broke doesnt turn to on position