In this video, I show you how to replace the alternator pulley, on a Mercedes. The car in the video is a Mercedes CLK (W209 2002-2009), but the process is the same for all Mercedes vehicles that have an OM646 diesel engine (200/220 CDI). This includes the C Class (W203), E-Class (W211), CLC Class (W203), and any car that has a clutched/overrunning alternator pulley. The alternator pulley can fail, causing the tensioner to bounce around due to increased resistance.
Tools used:
- 17mm 12 point deep/swan neck spanner
- 1/2 inch drive breaker bar or 1/2 inch drive ratchet
- Blue Print ADG05506 Freewheel pulley tool - this is an M10 spline bit, with a 33 tooth bit around the outside. You can purchase the 33 tooth bit separately and use an M10 spline bit that you already own.
- 17mm spanner to hold the alternator tool
- Small pick or flat head screwdriver, to remove the cap from the alternator pulley
- 1/2 inch drive torque wrench
- Laser Tools 7017 Wrench Extender, to attach a torque wrench/ratchet onto a spanner
- Philips/cross head screwdriver
Note: In the video, I should have reduced the setting on the torque wrench, as the wrench extender moves the head of the torque wrench away from the pivot point - meaning the applied torque was higher than indicated. If I re-did it, I would reduce the setting to around 75-80Nm.
Don't forget to give this video a "LIKE" if you find it helpful or interesting!
"COMMENT" any feedback to help my channel grow or questions if you have any!
And "SUBSCRIBE" to help support my channel and to stay updated on my projects!
*This video is for entertainment purposes only*
=============================
Follow me:
=============================
Instagram: / mrsinghsgarage
30 сен 2024
