How to Replace Brake Pads and Rotors on 2012 - 2014 Toyota Camry

Подписаться 1,6 тыс.

Просмотров 75 тыс.

50% 1

How to Replace Brake Pads and Rotors on 2012 - 2014 Toyota Camry
Installing New Brake Pads and Rotors on 2012 Toyota Camry SE 3.5L V6.
2012 toyota camry brake pads and rotors, 2013 toyota camry brake pads and rotors, 2014 toyota camry brake pads and rotors, toyota camry brake pad replacement, toyota camry rotor replacement, brake pads replacement, brake pads and rotor replacement, rotors, rotors and brake pads replacement, rotors replacement, brake pads, how to replace brake pads, how to replace brakes and rotors, how to replace brake calipers, how to change brakes and rotors, how to change brake pads, brake job
How to Replace Brake Pads and Rotors on 2012 - 2014 Toyota Camry

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@REDACTED-1 2 года назад

In lieu of grease, you can use anti-seize compound. It’s less likely to melt and fly around in there. Anti-seize will stay in place and prevent the mating surfaces from corroding. It’s also good general practice to knock off any rust scale with a wire brush and to coat the metal with some old motor oil. It helps slow down corrosion and reduces rust scale.

@pgmreallaw Год назад

Thanks for a great video - confirms that I will be taking this job to my mechanic despite the cost!

@TheRealSkeptyk 3 месяца назад

all good man!

@DaveLane-m8z 3 месяца назад

You forgot the squealer devices on the pads. They also keep the pads from rattling. They need to be installed with them at the top of the pad so it keeps the pad forced in the direction of rotation. They were in the hardware kit. I saw them at 6:12 in your video. Also no grease on the rotor. You also should wire brush the face of the hub. A little grease on the tips of the pads. Not much though. You did a great job of showing the rest of the replacement.

@abyssalsoul6216 3 года назад

Caliper bracket bolts 79 ft/lbs Caliper pins 25ft/lbs

@TheRealSkeptyk 3 года назад

Appreciate that, thanks!

@jasonly4287 3 года назад

you have forgot the spring tentioners for the last one...that's why people used to have extra parts after fixing the car...lol

@J__7777 2 года назад

There was no spring on the rear brake pads if you pay attention

@Gutsmagoria Год назад

Especially considering the second view into the job, I'm not convinced you need to remove the caliper hanger. The other stuff you might tighten good-enough, but stuff like that I'd wanna make sure. For the other geeks, Chilton says: Front caliper hanger 79 ftlb Front slide pins 25 ftlb Wheel 76 ftlb Rear hanger 58 ftlb Slide pins 20 ftlb Bleed screws 73 in-lb (8.3 Nm)

@TheRealSkeptyk 3 месяца назад

thanks for this add in!

@danzemer76 7 месяцев назад

God bless this gentleman for an excellent video

@TheRealSkeptyk 3 месяца назад

thank you sir

@HMAnetwork 3 месяца назад

Does this car have ABS? If so, did you need to mess with its sensors at all while doing this? Thanks.

@bradkuykendall9174 Год назад

I’m curious about the rear pads? Do these not get the little spring clips on pads?

@privatename3621 3 года назад

a torque wrench and proper tightening specs are your friend..

@randeegarcia4567 3 года назад

I was like what about the torque wrench?

@philipcbarrera1537 2 года назад

Good job but caliper pins should of been regreased

@d0ug 2 года назад

He shows you that with the other wheel (the reverse angle shot in the second half of the video)

@berhaneatsbaha4224 Год назад

Excellent demonstration, specially the front and rear view of how things are laid out. At least for a novice like my self. Thank you,

@TheRealSkeptyk 3 месяца назад

appreciate this comment, try to make things simple and easy - thanks again

@yunuspatel2647 5 месяцев назад

Excellent brake replacement video. Thank You.

@alonsogonzalez2517 Год назад

Great video very educational I think I'm going to change my rotters when I brake the front is starting to shake

@henryijeoma 5 месяцев назад

did you end up doing it yourself?

@TheRealSkeptyk 3 месяца назад

awesome!

@juanantoniocolonbonet7464 2 года назад

Excellent Video. Good note on adding grease. Thx!!

@felixmeow6221 2 года назад

i dont think it is... that grease i would i think fling out on the rotor.. not good.

@thooks1234 2 года назад

Not really. The best practice is to wire brush/wheel the rust/corrosion off of the hub/rotor hat and use anti-seize to prevent corrosion/sticking in the future.

@MaryDuran-c3d 9 дней назад

Thanks for the great video it help me alot very well explained 👍

@rwinstanley8668 3 года назад

Front disc pad should have a “squealer” clip/wear indicator? Typically removed from old pads and replaced on new pad.

@davejr2979 3 года назад

He his missing more parts then just that. . . .

@bill_duh_bear 2 года назад

What's your opinion on the normal rotor vs the drilled/slotted? I currently have drilled/slotted rotors that came with my car and I like the bite they have. I've noticed my pads wear out pretty fast though. Great DIY video!

@TheRealSkeptyk 2 года назад

I like the drilled and slotted myself, but this is also our family hauler. Im not racing or needing the aggressive capabilities of those types of rotors... But yea they are awesome for performance based vehicles.

@joeram92 Год назад

I installed the drilled slotted rotors on my daughter's Camry. I noticed the brakes were squealing within a few months. I changed pads and had the same problem. Bought new regular rotors and so far it's been more than a year and I haven't heard anymore brake noises.

@orestesdd 3 года назад

Do you know if the 2012 Toyota Camry 4cyl LE has only front brakes? I will need to know this because I'm going to take it for a brake inspection, but I am sure the brake pads may need replacement and who knows if the rotors too, for they haven't been changed in 9 years. I tell you this because I don't want to be had and paying too much since I am sure I may need brake pads and rotors replacement. Does anyone know how much I should pay in November 2021 for brake pads, rotors, and labor or whatever else it's needed? Thanks for your video.

@Homelander-js9hd 2 года назад

I don't think that is true...whomever told you that may have meant that it only has front brake pads for disc brakes...maybe has drum brakes on the rear...I'm pretty sure all newer cars have front and rear brakes.

@TaijiArban 2 года назад

All camrys made after 2000 is guaranteed to have rear brakes. Heck I would say all Toyotas within that period, except for maybe the corollas, matrix, or yaris, is gonna have rear brakes(not drums)

@thooks1234 2 года назад

Every vehicle has front and rear brakes....

@intralockshorts Год назад

@@thooks1234 hes talking about disc or drum brakes…

@squillissquite5911 3 года назад

dumb question, but this will work on the 2013 LE Camry correct?

@TheRealSkeptyk 3 года назад

Absolutely should work.

@marklw82 2 года назад

DO NOT PUT GREASE ON YOUR HUBS !!! AS THIS JOKER DID, it will mess with the runout of the rotor

@abstractaccuracy8570 3 года назад

Back of the rotor or back of the car?

@Hammad292 2 года назад

shorter slide pin is going upside or downside on caliper?

@eric4brs 2 года назад

Was that 14mm socket or 15mm? Beginning says 14, at 10 min says 15.

@pkdude5334 2 года назад

@sheddski2942 Год назад

im doing my fronts this week im going Toyota Oem reason Why i got 147000 miles and still have meat left but Pulsating so its time plus there cheaper including hardware kit less than 300.00 for fronts

@TheRealSkeptyk 3 месяца назад

hope it helped?

@mrdxiong Год назад

Didn't grease the sliders on the brake pads. Didn't say the ft/lbs to screw the bolts back in.

@TheRealSkeptyk 3 месяца назад

rookie mistake...

@hilditchfam1 Год назад

Anybody know if there is a difference bewtween this and doing them on same year hybrid model?

@TheRealSkeptyk 3 месяца назад

honestly not sure...

@duyetnguyen2692 2 года назад

thank you ,you are best

@LDsBBQnCookin 3 года назад

Is it the same process for my Honda Accord Sport?

@TheRealSkeptyk 3 года назад

Come on bro, come on now... lol

@don4971 22 дня назад

Thanks

@danwoomer7226 9 месяцев назад

Good job

@TheRealSkeptyk 3 месяца назад

thanks dude

@danshilling4240 2 года назад

I don't think I'm be doing my own. I didn't realize that there's so many things to do just to replace the brakes. Good video though thanks for that

@yetigang4545 Год назад

It’s shouldn’t be required to do that full process. I just did mine based off this video. He went the extra mile. I just took that first peice off and slid in the new brakes then decompressed the the brake piece - forget the name of it. Shouldn’t NEED to go that far with it. But it is good to do a little extra every now and then to keep it in good shape

@oliviaa1911 3 года назад

I have a question, went I bought the brakes at a toyota dealer, they didn't bring the squeale/ clip hat go in the caliper, can I buy them in the auto parts store?

@davejr2979 3 года назад

The squeal clip dose not come with the pads. It's comes with the shim(anti squeal) kit!

@TheRealSkeptyk 3 года назад

the clips i have replaced with that kit act as the squeal too, just a heads up. If they wear down far enough, believe me you brakes will squeal...

@robertwalker7633 11 месяцев назад

Great information

@TheRealSkeptyk 3 месяца назад

thank you

@rickherman4539 Год назад

remember your jack stands . stay safe

@TheRealSkeptyk 3 месяца назад

indeed!

@NotSoMagicMikee Год назад

Damn I just bought two rotors and 2 pads for 92 total off rock auto. These auto zones and oreillys are so expensive for no reason.

@christopherhoang1339 Год назад

but they are convenient

@christopherhoang1339 Год назад

Thanks, in general great job!

@TheRealSkeptyk 3 месяца назад

thank you

@zakac17 3 года назад

Thanks!

@juansanchez-kb4ij 3 года назад

How do u loosen a bolt if it’s to thigh so rusty man

@TheRealSkeptyk 3 года назад

Spray some wd 40, or pb blaster all over it... let it work in all the groves and then give it a crack.

@MrCchh7 3 года назад

Also try a breaker bar or a regular wrench with a pipe attached like in this video

@c.h.r.i.s2253 3 года назад

Why does every single video for Camry front pads have different variations of the small clip on the “ear” of the pad? This guy doesn’t have any on the outer pad at all. All kits come with them. Why didn’t you use them?

@TheRealSkeptyk 3 года назад

I used what came with the kit my friend... simple and direct replacement like the video shows. Not here to complicate anything for anyone, just making peoples lives easier by saving a buck doing the job yourself. Appreciate the comment.

@smokedogz5 3 года назад

Great video thank u

@TheRealSkeptyk 3 года назад

Thanks for watching!

@tremayneg Год назад

How do to secure the rotar?

@TheRealSkeptyk 3 месяца назад

just push it on, no screw...

@kevins9780 2 года назад

Can't get my rotor off. Hammer doesn't do it. Is e brake locking it somehow and how do I release it?

@Alucard_Q_Kazoo 2 года назад

Once the bolts come off the rotor, it should be able to come off without anything else holding it. I’ve had a similar issue with a stuck rotor: I understand you said the hammer didn’t work but you really gotta bang the hell out of it. It might be due to rust. If the emergency brake was the engaged and causing the issue, you would notice it when driving as well.