How To Replace Control Arm & Trailing Arm Bushings(DIY Tool)

Подписаться 609 тыс.

Просмотров 372 тыс.

50% 1

Learn how simple it is to replace control arm & trailing arm bushings, or knuckle bushings(as shown in this video) by using the DIY press tool shown in this video. It will make removing old, worn, noisy bushings an easy task. Parts for this control arm & trailing arm bushing tool can be purchased at your local hardware store or home improvement store for under $20. This tool can also be modified for different size bushings by using larger pipe and different size sockets. You can also use this tool for other applications. Save a lot of money by replacing the bushing yourself, instead of paying a machine shop to do the job. Enjoy!
**My Automotive & Mechanical playlist link is below:
• Automotive & Mechanical
**Help me make more videos by visiting the link below. All donations, big or small, would be greatly appreciated. Thank you!
paypal.me/elect...
Bobby Tectalabyss & bklynlandlord, Thanks for your generous $5/mo donation!
**For GREAT deals(Usually cheaper than EBAY) on Automotive tools/supplies,. electronics, drones, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)
All Items: bit.ly/2cgYr14
Flash Deals: bit.ly/2cb6CZB
*Try these money saving coupon codes: BGAFF7 or affiliate6 or elec or measure* or ask if other codes are available!
Thanks For Watching!
**If you enjoy watching my videos, then be sure to SUBSCRIBE, POST LINKS to my videos on other websites & blogs, rate "THUMBS UP", and check out my video playlists. Doing so helps to ensure that many more videos will be uploaded to my YT channel in the future. (Views are absolutely essential to ensure this channel remains in an active state)**

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 395

@electronicsNmore 3 года назад

ATTENTION: In the video I referred to the suspension part with the faulty bushing as the "Trailing Arm", that was incorrect. I was replacing the KNUCKLE BUSHING. Thanks for watching!

@dappa311 3 года назад

Where did you purchase those Grade 8 bolts, nuts and washers? I was searching for something like this last week, had to press in a wheel hub sleeve

@sarawakiansborneo418 2 года назад

Yup..can used for upoer arm bushing s too..Honda civic ek 1996

@thebordernow 5 месяцев назад

Yeah, I was wondering.... that was some odd Vertical "trailing" arm.....but great content and explanation.

@jackwood2328 15 дней назад

There are trailing arms all over the place on rear suspensions. Don't worry, we know what you mean. Good trick. Difficulty is finding fresh bushes that last 3 minutes.

@richsmith9063 10 месяцев назад

Academy Award Winning material. Seriously, good stuff !!! Thanks.

@deanoscott 3 года назад

Rather than a long bolt, which as you pointed out, bottoms out, use threaded bar. Works a treat.

@electronicsNmore 3 года назад

A fine thread rod is great too. Thanks for watching Dean! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. ru-vid.complaylists

@deanoscott 3 года назад

@@electronicsNmore absolutely bud. Just my kind of channel. New subscriber here 👌 great work.

@liuj88 19 дней назад

@@electronicsNmore Do threaded rods come in Grade 8 so there's no risk of breaking?

@andrewlietzow7739 2 года назад

Thank you so much. I am stuck in a downward spiral toward a complete dead end, but this bushing compression tool may save the diy project. I was "simply" intending to change the rear wheel bearing in my GMC Terrain, until I snapped off two of the four bolts holding the WB to the knuckle. That led to a decision to remove the knuckle, and thus the need to remove two control arm bushings. You have given the weekend, wannabe thorough mechanic hope!

@phillipzan2005 5 лет назад

I been fixing vehicles for 10+ years. And that was a real slick idea. I love learning new ideas from all kinds of people.

@electronicsNmore 5 лет назад

Glad you enjoyed my video Phillip! Be sure to watch my "Automotive & Mechanical" video playlist and most importantly share my channel with others. Thanks

@bosanovaboy 6 месяцев назад

Excellent video thank you

@efrainrodriguez9995 Год назад

If you are a genius thank you very much I really appreciate it

@treyharris6221 4 года назад

Thank you so much for this. I have a 2001 Sonata and your method worked beautifully. Only thing I had to do differently was to use a 1-1/2" nipple and pipe cap. The 1-1/4 was just too close. Awesome hack, my man!

@electronicsNmore 4 года назад

You're welcome Trey! Glad it worked out. Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you ru-vid.complaylists

@NiftyThrifty 3 года назад

Same 1 1/2 worked great for me

@maddrichstaks7787 Год назад

Same here..

@jeffstieren4474 Год назад

Excellent.

@electronicsNmore Год назад

Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks ru-vid.complaylists

@rkbyrd4432 8 месяцев назад

Excellent tutorial! Thanks for putting this together. The only thing I would do differently is to put a thin film of high temp (red) grease on the outside of the new bushing to allow it to slide in a little easier. Good job!

@grantdawson9262 2 месяца назад

Thank you for the great detail that you included in this vid. Great job.

@alexanderSydneyOz 7 лет назад

Great idea and presentation! that is a benchmark in clear instruction video. cheers.

@electronicsNmore 7 лет назад

Thanks Alexander! Be sure to share my channel with your friends, rate thumbs up, and check out my Automotive/Mechanical video playlist.

@aerotuc 5 лет назад

this is the way to do it ,least work involved and cheapest.The best advice ,same as i practice is your safety precautions.thanks.

@electronicsNmore 5 лет назад

Glad you enjoyed the video! Be sure to look over my "Auto & Mechanical" video playlist below, and most importantly share my channel with many others. Thank you ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@NiftyThrifty 3 года назад

YOU SIR DESERVE AN AWARD! 05 Sonata could not get bushing out for the life of me. This worked perfect!! Came out like butter. Thanks for saving me money!

@electronicsNmore 3 года назад

Same car. Great to hear! Be sure to check out my wide range of videos and share. Thanks

@michaelgillespie3207 5 лет назад

I keep a couple different sizes of hardened threaded rod to make my own bushing presses. and when you are putting everything back together make sure that the vehicle is at "ride height" when tightening any bushing thru-bolt (unless specified in the factory service manual) in order to avoid shortening the life of the bushing.

@Scottsudz84 4 года назад

How are you able to tighten it if you have the wheel back on and it isn't accessable . Do you have to do it in a pit or on a hoist ?

@pastytit 3 года назад

@@Scottsudz84 jack hub

@thebordernow 5 месяцев назад

@@Scottsudz84 Jack the car up, place it on jack stands, then use the floor jack under the suspension to jack it to typical compressed, on-road position.

@671-u6c 3 года назад

Very impressive 🤙🏽 going to give it a try on our 05 honda crv knuckle bushing headed to the hardware store. God bless

@Shamus71 5 лет назад

I have to do the trailing arm bushings on my BMW and I’m not keen on buying a $189 set. I’ll go this route. Thank you for this video.

@electronicsNmore 5 лет назад

You're welcome Shane! Just look for the right size socket and use a fine thread bolt. Be sure to look over my extensive video playlists below for other great videos of interest to you, and most importantly share my channel with others.Thanks ru-vid.complaylists

@ucanoe 2 года назад

thanks for taking the time to show us this great work around method

@sirsweetness8332 4 года назад

Made one recently with PVC 2” for taking out bushings from knuckle in a Toyota Not used it yet waiting for bushings to be delivered. Used an old lawnmower blade in place of deck plates you used. Cut blade in center with cutoff tool. No metal outer on knuckle bushings. Just rubber.

@electronicsNmore 4 года назад

PVC? Wow, way too weak for my car.

@sirsweetness8332 4 года назад

electronicsNmore I just went to Home Depot and bought a galvanized nipple just in case PVC breaks or cracks.

@sirsweetness8332 4 года назад

electronicsNmore PVC worked. First bolt stripped smooth and second bolt did the job. PVC unscathed

@johnjoe6529 3 года назад

Thank you sir, very simple, very easy and not expensive.

@electronicsNmore 3 года назад

Glad it helped! Be sure to rate thumbs up and share the video link with others. Thanks

@jtlgarage7751 5 лет назад

how can people click on dislike button for a great instruction video like this?? thanks mate this video help me so much :)

@electronicsNmore 5 лет назад

It's RU-vid, there are many Trolls and undesirables. Not everyone is appreciative like you. Thanks for watching! Be sure to check out my video playlist below and share. :-) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@pastormartinez4676 5 лет назад

Ingenuity at its best! I’ll return the favor by advising you getting some ratchet wrenches... I can’t live without them since I used them for the first time. You’ll love them!

@electronicsNmore 5 лет назад

I explained in the comment area several times why adjustable wrenches were used. :-) Thanks for watching!

@sarawakiansborneo418 2 года назад

Useful DIY tool..save much money to a special tool

@DennisRundle Год назад

Great idea I'm going to make one this weekend, saves me buying a bushing tool, it's a budget bushing project, like on a shoe string,....

@willvarden1181 5 лет назад

This is amazing! I made one for my mk3 supra. Works like a charm even on 30+ year old bushings

@electronicsNmore 5 лет назад

Great to hear Chase! Be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others. Thank you! ru-vid.complaylists

@brianleonard6879 4 года назад

What size socket and pipe cap did you use on the supra?

@michaeljohnson9405 4 года назад

Great idea! I like to see others coming up with ingenious ideas to accomplish tasks that can prove quite difficult. I do things like this on the fly, but I never think about making a video until my wife says how genius it was. Absolutely love this idea and video!

@electronicsNmore 4 года назад

Thanks for watching Mike! Be sure to look over my extensive video playlists for many other videos of interest to you, and most importantly share links to my videos on social networking sites. ru-vid.complaylists

@TBruce1380 5 лет назад

Doing this now....in a sorta different way.....except the only thing left on the bushing was the metal shell stuck inside..great video!

@electronicsNmore 5 лет назад

Hope it works out for you! Be sure to look over my "Auto & Mechanical" video playlist below and share. Thank you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@capri2wd 7 лет назад

even in well kited out garages we end up doing this as so many different sizes of bush and sometimes no way of getting the part to sit correctly in the press. Nice demo. there will be a kit available that is essentially the same as what you made but would be like $100.

@electronicsNmore 7 лет назад

Glad you enjoyed the video! I couldn't find a kit locally. They all had the wrong sizes.

@gregmelton9355 3 года назад

Great video! Clear and concise. Much appreciated!

@electronicsNmore 3 года назад

You're welcome Greg! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you! ru-vid.complaylists

@davenichols9384 4 года назад

Very good demonstration and diy parts. Awesome video 👍

@electronicsNmore 4 года назад

Thanks Dave! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share links to my videos with many others on social networking sites. ru-vid.complaylists

@SRZRB 5 лет назад

Just ran across this. Gonna make one tomorrow. Awesome

@electronicsNmore 5 лет назад

Great to hear! Be sure to share my channel with others, and look over my extensive video playlists below. Thanks! ru-vid.complaylists

@maclyn36 5 лет назад

Very clever ....... With a bit of thinking you can find a way to solve most problems ....well done

@electronicsNmore 5 лет назад

Thanks! Be sure to look over my "Auto & Mechanical" video playlist below and share. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@d-s-ll2378 5 лет назад

Genious, n I also like your style of talking.👍

@electronicsNmore 5 лет назад

Thank you! Glad you liked my idea and enjoyed the video. Be sure to look over my "Auto & Mechanical" video playlist below for other great videos of interest to you, and most importantly share my channel with others. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@David-yh5po 4 года назад

Thanks for sharing this video with us.

@electronicsNmore 4 года назад

You're welcome Dave! Be sure to check out my wide range of videos for many other videos of interest to you, and most importantly share my YT channel with others. Thank you ru-vid.comc/playlists

@ernestlunsford3964 3 года назад

Thank you so much, awsome viedo!!!!!!

@electronicsNmore 3 года назад

You're welcome Ernest! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you! ru-vid.complaylists

@DesertLyons22 6 месяцев назад

Beautiful! Thanks for sharing your idea!

@electronicsNmore 6 месяцев назад

Glad you liked and appreciated the video! Be sure to check out my extensive video playlists for many other videos of interest to you and share. Thank you

@hotflashfoto 5 лет назад

What a really intelligent and simple solution! Thank you. The only suggestion I would offer is to use anti-seize for the inside of the opening. It will help if you have to remove it and won't absorb or attract water like soap does. I have some bushings that will need attention soon and this is now on my list of how to do it!

@electronicsNmore 5 лет назад

Glad you enjoyed the video! Be sure to look over my "Auto & Mechanical" video playlist below and share. Thank you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@mrmoss149 3 года назад

Just what I needed to see to confirm my thinking. Thank you for saving all of us do it your selfers a TON of money. Very much appreciated.

@electronicsNmore 3 года назад

Glad you found the video helpful. Be sure to rate thumbs up, look over my extensive video playlists for many other videos of interest to you, and share my channel with others. Thank you!

@micthegreasemonkey2918 4 года назад

Isnt it the greatest feeinng in the world when it finaly comes out !!!

@anhhaineou.s.a425 3 года назад

Thank you for sharing I am about to do mine .

@carlosbmartinez6457 Год назад

Great job.. loved it

@maddrichstaks7787 3 года назад

Great work with simple attachments

@electronicsNmore 3 года назад

Glad you like it! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks ru-vid.complaylists

@hello_world_zz 2 года назад

You do not have ratchet man, but you have smart mind! Great idea!

@mikeharley1292 4 года назад

Awesome video and very helpful, thanks a lot for share this information, I need to change bushing track bar, thank you very much!!!

@electronicsNmore 4 года назад

You're welcome Mike! Be sure to check out my wide range of videos and share. Thanks!

@davegeorge7094 5 лет назад

I take lots of time do engineer this, i did bushing replacement on a Supra with threaded rods, iron stock, etc. from the hardware store and now have a multi-purpose press.

@electronicsNmore 5 лет назад

A press is VERY handy to have. :-)

@4BillC 5 лет назад

Awesome idea! I have some knuckle bushings I need to change. I just may have to try this...

@electronicsNmore 5 лет назад

It works when made properly. Be sure to look over my video playlists below for other videos of interest to you and most importantly share my channel with many others. Thank you Bill! ru-vid.complaylists

@my2centz196 5 лет назад

I have the same problem finding anything to press in my suspension bushings that go to the strut so I haven't fooled with them. I have bearing press kit like autozone has but nothing that will work. I gotta say I'm glad it worked. I was thinking of trying to make something similar but hadn't gotten around to it yet but now I know if will work and have a better idea of what to do I think I'll probably do it soon.

@electronicsNmore 5 лет назад

I have many great videos on my channel covering many different subjects, so be sure to look over my extensive video playlists for other videos of interest to you and most importantly share my RU-vid channel with others. Thanks!

@The_R-n-I_Guy 4 года назад

I'm in the middle of changing all the bushings on my 96 Buick Roadmaster. Checking out all the different ways people do it without special tools. I've been collecting metal plates and big washers left over from projects at work. Now I just hope I have the right size sockets. If not, I'll be cutting and welding some scrap metal together to get it done.

@electronicsNmore 4 года назад

Thanks for watching Dan!

@JS-ri2rx Год назад

Good effort well done

@RalphCloud 2 года назад

great work !

@electronicsNmore 2 года назад

Thanks a lot! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. ru-vid.complaylists

@train4905 2 года назад

A most superb job sir,well done

@electronicsNmore 2 года назад

Many thanks Stephen! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks ru-vid.complaylists

@gregoryscavone1076 5 лет назад

You sir are a genius

@electronicsNmore 5 лет назад

Thanks for the kind words Greg! Be sure to look over my "Auto & Mechanical" video playlist below for many other videos of interest to you, and most importantly share. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@aldee3018 2 года назад

you the man!!!

@nicholasgranat2999 2 месяца назад

Good stuff!

@skyscraper37 7 лет назад

Good idea! Now take some of the money you saved by diy and get a set of ratcheting box wrenches

@electronicsNmore 7 лет назад

Already have them in storage. :-) I used what I had laying around.

@mdrew44628 7 лет назад

electronicsNmore I was going to say the same thing, but to be fair, I probaby couldn't find the right wrenches either ( 6 metric socket sets...all missing the 10 mm and 14 mm sockets....disappeared into the garage ether...lol) Very clever idea btw

@electronicsNmore 7 лет назад

My tools are very limited right now because I'm traveling a lot.

@rodger6940 5 лет назад

@@electronicsNmore can you please tell me what size is the bolt and where did you get all the things from

@ro33west 5 лет назад

@@electronicsNmore we commend you for traveling and not paying into Donald Trump's system Amen.

@Fosgen 4 года назад

Tip: put bushing into freezer overnight. Take out right before fitting. Easy peasy fitting.

@electronicsNmore 4 года назад

Good Idea. The slight shrinkage will ease installation.

@Fosgen 4 года назад

@@electronicsNmore Yup. If you do it in hot day when suspension arms are warm, add grease into hole. You can literally do it by hand to some point.

@viplegaleducation1292 5 лет назад

Thoroughly enjoyed it!

@electronicsNmore 5 лет назад

Great to hear! I have many helpful/interesting videos on my channel that cover a wide range of subjects unlike most channels on RU-vid, so be sure to look over my extensive video playlists for other videos of interest to you, and most importantly share my channel with many others. Thank you

@viplegaleducation1292 5 лет назад

Any way I could message you directly? Email maybe?

@electronicsNmore 5 лет назад

@@viplegaleducation1292 I can be messaged by visiting my channel main page.

@colestaples2010 4 месяца назад

Very clever!

@electronicsNmore 4 месяца назад

Glad you liked the video!

@pto200 6 лет назад

Very well done. Great job without a lot of investment. Thank you.

@michaelpark5589 5 лет назад

Great idea and presentation!

@electronicsNmore 5 лет назад

Glad you enjoyed it Michael! Be sure to look over my extensive video playlists below for other great videos of interest to you, and most importantly share my channel with others. Thank you ru-vid.complaylists

@soyyoroaldo 3 года назад

Very impressed.

@electronicsNmore 3 года назад

Glad you liked it! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thank you ru-vid.complaylists

@stateboy80892 5 лет назад

Sir you are a genius!!

@electronicsNmore 5 лет назад

:-). Thanks for watching! Please share.

@seanthomasrauchert1695 5 лет назад

Great was planning on making one of these! Perfect!

@electronicsNmore 5 лет назад

Hope it works out well for you Sean! Be sure to watch my "Automotive & Mechanical" video playlist below, rate thumbs up, subscribe, and most importantly share my channel with many others. Thank you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@haywardkong1213 2 года назад

Thanks.... Now I wish I saw this video before I changed out my control arms on my 2014 outback. Would the same idea work for wheel bearings?

@RTD1947 5 лет назад

Great idea!! Nice job doing a DIY.

@electronicsNmore 5 лет назад

Glad you enjoyed my video! Be sure to share my channel with others, and look over my extensive video playlists below for other videos of interest to you. Thanks ru-vid.complaylists

@samzchang 5 лет назад

太聪明啦！敢于挑战常规！多谢分享！

@electronicsNmore 5 лет назад

很高兴你喜欢我的视频!我有很多伟大的视频在我的频道, 一定要看视频播放列表, 最重要的是与他人分享我的频道。谢谢！

@Adam-qr4jj 5 лет назад

Great video, what a great way to save money, Thank You.... Cheers!

@electronicsNmore 5 лет назад

Be sure to look over my "Auto & Mechanical" video playlist below for other videos of interest to you, and most importantly share my channel with many others. Thanks! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@rawdio.docdar5715 5 лет назад

Well done sir

@electronicsNmore 5 лет назад

Glad you enjoyed the video! Be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others. Thank you! ru-vid.complaylists

@GForceVRX 5 лет назад

Your a legend well done!

@electronicsNmore 5 лет назад

Glad you enjoyed it!

@GForceVRX 5 лет назад

electronicsNmore I did mate thank you. I’ve got the same bush issue on my 2001 Mitsubishi Magna vrx, it’s the Australian version of the US Mitsubishi Diamante. I will use the same method;)

@tectalabyss 7 лет назад

Hi Doug. Well done buddy. I've had to do similar mods here at home and at work,over the years. Thank you for sharing. All my best. Bobby

@electronicsNmore 7 лет назад

Glad you enjoyed the video Bobby!

@stevesalman8265 4 года назад

Judging by the date I think we were thinking alike , made a similar system but the Bushings were very seized and will not budge, the problem progressed to bent bolts inside the bushings, worse is the trailing arm which is bigger, my Arthritis prevented me from continuing and I am now doing a major overhaul , Timming Belt, Spark Plugs and all Bushings, and thee ignition lock .... BTW is that car a KIA Amanti, its an exact copy of mine 2004, Cheers and good luck in all your endeavors

@electronicsNmore 4 года назад

I have a 2003 Hyundai Sonata. Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you, and stay safe Steve! ru-vid.complaylists

@felixcat4346 7 лет назад

Great tip. You probabily can use this with a different size socket to replace a lot of bushings this way. The tool from Autozone works pretty good.

@electronicsNmore 7 лет назад

Yes, use a smaller socket for smaller bushings. :-)

@phillipcleaver7063 5 лет назад

Hello , I,ve been doing this for years on old land - rovers , you are doing very well with this , but can I make a few points please : you have a relatively new vehicle here , on an old vehicle , these bell out hard right into the housing ( hole ) , & I have ripped the thread off of a 9/16 UNF hardened steel bolt trying to get them out this way , cranking with 2 sockets & ratchets , the bigger the bush is , the tighter they are in , a moderate smear of copper grease on both , the inside of the hole , & the outside of the bush , helps a lot to locate these bushes , & helps to prevent corrosion jamming them in hard for the next time you have to change it . It,s not a bad idea to copper - grease the through - bolt as well . Also , ensure you have all burrs carefully removed out of " the hole " without enlarging it before squeezing the new one in . This might sound like nit - picking but it all helps snatch success out of the jaws of failure . Good job from an old - timer ! ( use copper grease , not mineral grease as that will destroy your new rubber component )

@mr.nobody4900 5 лет назад

Out of the box idea. Two Thumps' Up.

@electronicsNmore 5 лет назад

Glad you liked the idea! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and most importantly share my channel with others. Thank You

@dotapromaster1254 5 лет назад

amazing idea,.,same style of work,.what tools comfortable and near is fine.,.,

@electronicsNmore 5 лет назад

Thanks for watching!

@yrtuag 5 лет назад

Sweet, great idea and job 👍😎🤠

@electronicsNmore 5 лет назад

Thank you Jim! Be sure to look over my "Auto & Mechanical" video playlist below for other great videos of interest to you and most importantly share my channel with others. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@ernieg1415 5 лет назад

good job, thanks for sharing it with us

@electronicsNmore 5 лет назад

Thank you Ernie! You're welcome. Be sure to look over my "Auto & Mechanical" video playlist below for other great videos of interest to you, and most importantly share my channel with many others. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@michaellee5084 5 лет назад

great idea

@electronicsNmore 5 лет назад

Glad you enjoyed the video Mike! I have many great videos on my channel that cover a wide range of subjects, so be sure to look over my extensive video playlists for other videos of interest to you and most importantly share my channel with many others. Thank you!

@joniferdoladol4277 5 лет назад

That's cool idea men thank you for sharing it i love it

@electronicsNmore 5 лет назад

You're welcome Jonifer! I have many videos that cover a wide range of subjects, so be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others so I'm able to make more helpful videos well into the future. Thank you! ru-vid.complaylists

@JOEGGGJOE 5 лет назад

Great idea 👍.

@electronicsNmore 5 лет назад

Glad you liked it! Please share.

@andybozeman9769 4 года назад

Too cool! Thanks. Doing mine this weekend. Gonna get the bearing press from Auto Z. But, I'm concerned that it will be too bulky to use in the wheel well. I'm like you about taking that trailing arm off, don't want to have to do more wrenching than necessary! Thanks again! Ain't You Tube great!?

@electronicsNmore 4 года назад

Glad you enjoyed the video Andy! Be sure to share my channel with many others, so I'll be able to make more videos well into the future. Thanks

@theonlyonegrimey 5 лет назад

Good shit that's an awesome idea 👍👍definitely making me one lol

@electronicsNmore 5 лет назад

Glad you liked the video! Also look over my "Automotive & Mechanical" video playlist below for other videos of interest to you, and most importantly share my channel with many others. Sharing by viewers is extremely important. Thanks ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@cleoxiii1189 4 года назад

Omg. Is there anything you DON'T do?!?!?!?!?!?! LOVE your vids!

@electronicsNmore 4 года назад

Thanks for watching Cleo! There are many other things that I do, but I can't put everything on my channel.

@cleoxiii1189 4 года назад

@@electronicsNmore I know :) I've mostly been following your electronics stuff ( Your Reviews, gadgets, hacks, mods etc etc) from my other account since your induction heater video! Seen most videos multiple times and I usually don't buy anything or start a project till I've checked your opinion of it or a similar video to what I'm planning and/or getting. However, once again falling down the rabbit hole that is your channel I just love the way you can explain just about ANYTHING in a simple and concise way without all the fluffy waste of time BS & shilling. It's very conducive to my (and I'm sure many others) preferred way of learning. The broad array of topics is amazing! Thank you for all your hard work and the knowledge you've shared! It is very much appreciated

@electronicsNmore 4 года назад

How do I get more subs like you? 😀 Glad you enjoy my videos!

@omarsidiq5738 4 года назад

excellent good idea.

@electronicsNmore 3 года назад

Glad you like it!

@markcollard9326 Год назад

Smart man.

@Raptor-700R 5 лет назад

Great idea love it

@electronicsNmore 5 лет назад

Thanks, please share.

@simbad909 2 года назад

Very cool🤟

@Tiz263 5 лет назад

excellent technique the only change I would make is the tools, a cheap set of geared wrenches from home depot or harbor freight will save you a bunch of time

@electronicsNmore 5 лет назад

At the time I was in the middle of moving. All my tools were packed up, so I had to use a friend's wrenches. :-)Thanks for watching!

@INTERNA9 3 года назад

Thanx

@electronicsNmore 3 года назад

You're welcome! Be sure to rate thumbs up and share. Thank you

@Marty09933 5 лет назад

Great video

@electronicsNmore 5 лет назад

Glad you enjoyed the video Marty! Be sure to look over my extensive video playlists below for other videos of interest to you, and most importantly share my channel with friends. Thank You! ru-vid.complaylists

@boduke2522 4 года назад

good job i invent all my own pullers and installers also but i never use cresent wrenches once in a blue moon i use those tools

@electronicsNmore 4 года назад

Thanks for watching Bo!

@jorbitz69 5 лет назад

Keep showing more of this videos. Auto parts rent useless and expensive C press none of which work. Well done.

@electronicsNmore 5 лет назад

Thanks for watching Jesus! Be sure to look over my extensive video playlists at the link below for other great videos of interest to you, subscribe, and most importantly share my channel with many others so I'm able to make more helpful videos well into the future. ru-vid.complaylists

@19211265 5 лет назад

Excellent well done 👍🏻 I subscribed

@electronicsNmore 5 лет назад

Thank you! Be sure to look over my extensive video playlists and share.

@jorgemarmolejo127 6 лет назад

You better patent this design before someone else steals it. Thanks for the video. That is smart

@electronicsNmore 6 лет назад

Glad you enjoyed the video! I have many other excellent videos on my channel, so be sure to check out my video playlists for other videos of interest to you and share. Thanks

@paulone-off7286 6 лет назад

Been doing similar using sockets, bolts etc to remove and replace bearings for years :-)

@23thebull 7 лет назад

awesome very ingenious

@electronicsNmore 7 лет назад

It had to be done. :-) Thanks for watching!

@23thebull 7 лет назад

electronicsNmore you da man

@shamskl3245 5 лет назад

Well done 👍

@electronicsNmore 5 лет назад

Thank you! Glad you enjoyed the video. Be sure to watch and share my "Automotive & Mechanical" video playlist below. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@thehilariousdarius8446 5 лет назад

You should take this to Shark Tank LOL Awesome Vid.

@electronicsNmore 5 лет назад

Glad you enjoyed the video! Be sure to rate thumbs up, watch my "Automotive & Mechanical" video playlist below, and most importantly SHARE my channel with friends. Thanks ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html

@z3180160 5 лет назад

nice job

@electronicsNmore 5 лет назад

Thanks Henry! Be sure to look over my "Auto & Mechanical" video playlist below, subscribe, and share. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hnd7P7O_vEQ.html