How to Replace Crankshaft Position Sensor 2010-2014 Subaru Outback 2.5L H4

Подписаться 527 тыс.

Просмотров 3,6 тыс.

50% 1

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com 1aau.to/ic/1AEC...
This video shows you how to install a new crankshaft position sensor from TRQ on your 2010-2014 Subaru Outback (2.5L H4). The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.
This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback
Tools you will need:
• 14mm Wrench 1aau.to/oacx/1A...
• 15mm Wrench 1aau.to/oacx/1A...
• 10mm Socket 1aau.to/obGa/1A...
• 12mm Socket 1aau.to/ob6z/1A...
• Circlip Pliers
• Ratchet 1aau.to/ob78/1A...
• Torque Wrench 1aau.to/obay/1A...
• Gloves 1aau.to/oa36/1A...
• Safety Glasses
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@TRQ 5 месяцев назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@rizen5123 Месяц назад

If anyone wants to save a good amount of time , you can easily take off the belt and pulley and have enough space to access the 10mm bolt that holds the sensor and take it out without having to remove the bracket and alternator . Saved me tons of time

@seabeepatriot2258 3 месяца назад

Thank you very much for what you posted here it made my job so much easier. This is the first time I've owned a Subaru I have a 2010 outback and I replaced the camshaft position sensor first and that works for a day but the next morning I went to go to work and it was not starting just a continual crank. Your video helped me do it in 20 minutes. Thank you very much!