How To Replace Drive Belt 2004-08 Nissan Maxima

Подписаться 518 тыс.

Просмотров 38 тыс.

50% 1

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/192/a...
The serpentine belt delivers engine power to a number of your vehicle's critical accessories, like the alternator and water pump. Over time, the rubber belt can harden or crack and begin to slip or break. It's best to replace your serpentine belt at regular intervals. This video shows you how to install a new serpentine belt on your 2004-2008 Nissan Maxima.
• Check here for more videos on the 2004-08 Nissan Maxima: • Nissan Maxima 6th Gene...
This process should be similar on the following vehicles:
2004 Nissan Maxima
2005 Nissan Maxima
2006 Nissan Maxima
2007 Nissan Maxima
2008 Nissan Maxima
Tools you will need:
• 12mm Wrench 1aau.to/oeU/1AX...
• 14mm Wrench 1aau.to/oeU/1AX...
• 12mm Socket 1aau.to/orV/1AX...
• 14mm Socket 1aau.to/orV/1AX...
• 19mm Socket 1aau.to/ohY/1AX...
• 21mm Socket 1aau.to/ohY/1AX...
• Trim Tool Set 1aau.to/ofu/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/otm/1AX...
• Socket Driver
• Socket Extensions 1aau.to/orV/1AX...
• Swivel
• Torque Wrench 1aau.to/okW/1AX...
• Floor Jack 1aau.to/ofs/1AX...
• Jack Stands 1aau.to/oe6/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Nissan Maxima 6th Generation 2004-2008: • Nissan Maxima 6th Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@armandocastillo9852 Год назад

I was able to change both belts on my 2008 Maxima 3.5 and I have some notes. Everything on the video Is shown great except for one part. This guy insists on loosing a bolt behind the power steering pump in order to remove the secondary power steering belt. THIS IS NOT REQUIRED AS I WAS ABLE TO REMOVE MY BELT without loosing that bolt since it was too cramped back there (Despite wasting an entire hour in this Texas summer heat trying). Don’t waste your time trying since it is too small of a space to fit a ratchet back there.What I will say is that for the secondary belt, after loosening the first locking bolt, the secondary tensioner bolt (the one that the tech explains is counter intuitive) has to be turned many many times before you feel any slack on the belt, so if you don’t feel any relief on the belt, keep spinning the bolt. Everything shown to remove the primary belt was excellent, my only notes were for the secondary belt. I wish I knew this information when I changed mine, it would have saved me A LOT of time. Also, I changed my belts out because on cold starts, my car would make a whining noise for about two minutes if the AC was on.