Buy Now!
New Engine Knock Sensor from 1AAuto.com 1aau.to/ia/1AEKS00063
This video shows you how to install a new engine knock sensor from TRQ on your 2000-2007 Ford Focus. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obFy/1AXAA00013
• 10mm Socket 1aau.to/obFr/1AXAA00017
• 7mm Socket 1aau.to/obFr/1AXAA00017
• 8mm Socket 1aau.to/obFr/1AXAA00017
• Trim Tool Set 1aau.to/oav4/1AXXX00006
• Pliers
• T30 Bit
• Ratchet 1aau.to/ob7r/1AXAA00016
• Socket Extensions 1aau.to/ob5I/1AXAA00015
• Torque Wrench 1aau.to/oa9X/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oNq/1AXSS00035
• Gloves 1aau.to/oa2P/1AXSS00048
• Safety Glasses
• Silicone Paste
• Floor Jack 1aau.to/oawf/1AXAA00068
• Jack Stands 1aau.to/oaig/1AXAA00065
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
31 мар 2024
