How to: Replace EVERY Coolant Hose on FZJ80 80-Series Toyota Land Cruiser, feat. Pesky Heater Hose

Подписаться 124 тыс.

Просмотров 16 тыс.

50% 1

Today I’ll show how to replace all the coolant hoses on the 1fz-fe engine of the 80 series Land Cruiser including the dreaded pesky heater hose (PHH.)
I'll also show how to bypass the rear heater, whose metal lines often rust and can't be replaced without removing the entire transmission.
Radiator Hoses:
16571-66030 Radiator Hose 1
16572-66021 Radiator Hose 2
16573-66010 Radiator Hose 3
90916-03117 Thermostat amzn.to/3XbArhf
16346-66020 Thermostat Gasket
22271-66010 Throttle Body Gasket
Little Hoses:
99555-10200 Coolant bypass hose, T-stat housing front
16267-66020 Coolant bypass hose, to radiator
16261-66040 Coolant bypass hose, Throttle Body
16264-66021 Coolant bypass hose, Throttle Body
Curved Heater Hoses:
87245-60350 Pesky Heater Hose
87245-60420 OEM Rear Heater Bypass Hose
Hoses from Curved kit I didn’t use, due to bypassing the rear heater:
87245-60480
87245-60340
1/2" 90deg heater hose (no part #) Rear heater Hose
absolute-wits-...
absolute-wits-...
absolute-wits-...
I don't have Patreon or ask for donations but you can support the channel with some rad Yota gear from my store: 6thgeargarage.c...
Follow Us:
Instagram: 6th_gear
6thGearGarage

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@mr.skeltal3730 24 дня назад

Did you replace every clamps? Where did you get them

@6thGearGarage 22 дня назад

Yes I replaced them with constant torque clamps. I got them from NAPA and they weren't cheap... but I don't want to have to mess with the PHH for another 25 years, so it's worth it!

@mr.skeltal3730 22 дня назад

@@6thGearGarage I'm about to do the same with the PHH and CT clamps. But for every other random coolant hose, did you do the same or use basic clamps?

@6thGearGarage 22 дня назад

@@mr.skeltal3730 I think I ran out of the CT clamps so I used some regular hose clamps on the easy to reach hoses, in case I ever need to tighten them. All the hard to reach ones have the CT clamps for sure.

@xd9sc1 Месяц назад

Holy moses! Maybe I'll just do an LS swap. Might be easier. Thanks for taking the time to post this content!

@Ghostrider-71 Год назад

Great video. Great explanation especially for nomenclature of the various hoses and attachement points. I will need to do this for my 1-HDT at some point.

@aattaboy Год назад

Probably the best 80 series video I've seen on youtube!! Thanks!!

@sommyerroa Год назад

Those hose in the back are worse when the steering wheel is at the left side 😒

@6thGearGarage Год назад

I probably wouldn't have even been able to film the video if the steering was on the left hand side. There's just not much room to see or do anything.

@yotersmitt 6 месяцев назад

This vid was just what I needed. Thanks much for putting it together. Very helpful.

@6thGearGarage 6 месяцев назад

Glad to see it helped someone else!!

@GrandmasMallCrawler 10 месяцев назад

just reverse in a drive thru

@6thGearGarage 10 месяцев назад

I did once at an ATM :)

@retro_88yota Год назад

I have learned the hard way not to crush the heater hose tubes. I tried to flush a heater core in a 87 toyota pickup and crushed that line. I opted to replace the heater core and learned that those tubes dont come with the heater core and they are obsolete.

@6thGearGarage Год назад

I had a heater core for a pickup with a bent tube that I was able to heat up and bend back to round with some sockets, similar to the way I repaired a bent radiator neck: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-farPXTp1z2U.html

@retro_88yota Год назад

@@6thGearGarage I have fixed them too but it sucks lol

@FelicityDyertyu 20 дней назад

Johnson John Lopez Nancy Lee Betty

@NigelNaughton Год назад

The best thing about changing all the hoses is that soon after your head gasket will blow and all that work will have been done in vain 😜. There are specific types of hose clamp pliers that work great with those clamps. You squeeze them and they lock so the clamp is open and then you can move it around very easily. Cool vid.

@6thGearGarage Год назад

Hahaha that would be my worst nightmare! I'll check out those hose clamp pliers, thanks!

@coltenphoto 7 месяцев назад

Truly, truly, thank you for this. The part numbers are greatly appreciated.

@6thGearGarage 7 месяцев назад

Glad it was helpful!

@Henray316 Год назад

Thanks for the video. I would throw some fresh belts on while you had it open up front

@6thGearGarage Год назад

They were supposedly replaced before I Bought it, but you’re right it would have been the ideal time. I considered replacing the radiator as well while the fan and shroud were out but they’re not exactly cheap for a nice one.

@carter18622 Год назад

Couldn’t have posted at a better time! I’ve got all this sitting in my wits end cart right now.

@6thGearGarage Год назад

That’s where I got mine from as well 👍

@eurokayf Год назад

Good job. Very detailed. Love that front brush guard setup.

@6thGearGarage Год назад

Thank you. The brush guard is a rare OEM option on the JDM 80 Series. My 80 has a lot of rare options, here's a video I made showing them all ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ar8Iop3D7so.html

@charliecoco2115 Год назад

You have a TV / Movie 'voiceover' voice. Easy on the ear.

@6thGearGarage Год назад

Well thanks! Good to know I may have a backup career if this youtube thing doesn’t work out 😁

@kurtchristopher7392 Год назад

Great videos! Thanks for taking the time to make them.

@6thGearGarage Год назад

Thanks for watching, glad to see they are helping people.

@richdevito78 Год назад

What did u do with the electric switch for rear heater?

@6thGearGarage Год назад

I left it as-is, in case I ever get around to replacing those rear lines.

@chairmanmao3885 Год назад

Awww yesss🎉

@earthwindnfire6407 Год назад

Great video! 😊

@NKPGarage Год назад

Love the detailed video. Very nice work brother!!

@KiyaWarrior Год назад

Great video. I did all of this last year myself before I saw your guide, however you did just help me with something else @ 25:23.... The mechanic that I took it to a few years ago did so bad and left so many things loose / un-plugged and you helped me find another part. Ugh, thank you but what a nightmare that was. I have done all of the maintenance myself ever since. Keep up the great vids man.

@6thGearGarage Год назад

Great to hear!

@drewfleming7065 Год назад

WOW...Your right....what was Toyota thinking????? I'll stick with my 22R. Toyota got it right with it....

@6thGearGarage Год назад

It doesn't get much simpler than a 22r! Great motors to wrench on!

@drewfleming7065 Год назад

@@6thGearGarage Dang thing only weights 385lbs....4 people can pull one out with a 4x4 and some rope....Your vid would be GREAT help for someone with a 80 series....

@lukerobinson8843 Год назад

6th Gear Garage if you need any help with the hose let me know i live in australia

@6thGearGarage Год назад

Thanks mate!

@FIVEVEEZEE Год назад

Pesky heater hose and throttle body hose isn’t even bad on a RHD 😂. If you had a LHD you would not be able to film half of this. The PHH is somewhat visible, and the throttle body hose has to be removed and installed by feel. Hardest part of the PHH is the bolt of the back of the head.

@6thGearGarage Год назад

That bolt was the worst - I left it out.

@tbassiii Год назад

Really? I thought it was easy, I’m having a hard time figuring out how to remove the damn hose! Lol

@FIVEVEEZEE Год назад

@@tbassiii remove the spring clamp from the block side. Needle noses will work best in my experience. After that I made some cuts in the hose. It pulled off easily after that. You remove the pipe assembly with the hose still attached to it through the wheel well.

@tbassiii Год назад

@@FIVEVEEZEE ah that’s what I was wondering. You can see it through the wheel well with the wheel off? I was about to pull the starter haha

@FIVEVEEZEE Год назад

@@tbassiii Yes. I don’t think removing the starter will make a difference. It’s not completely obvious. Pretty buried in there