No video :(

How to Replace Exterior Door Handle 2012-2017 Toyota Camry

Подписаться 509 тыс.

Просмотров 101 тыс.

50% 1

Buy Now!
New Exterior Door Handle from 1AAuto.com 1aau.to/ia/1ADH...
This video shows you how to install a new TRQ door handle on your 2012-2017 Toyota Camry. Door handles, especially the driver side, withstand daily abuse. It’s no wonder one might wear out or even break off eventually. TRQ door handles are precision engineered to fit your vehicle perfectly.
This process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa6h/1A...
• T30 Driver 1aau.to/oBc/1AX...
• Pick 1aau.to/oFu/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@JessE-EsseJ 3 месяца назад

My 2012 Camry LE didn’t have a connector which made it much easier! Took seriously like three minutes. Thanks a ton!

@mosb7398 8 месяцев назад

Just did this (minus the connecting piece on the front) in twenty minutes. Nearby dealership quoted me for over 350 for two hours. Thank you for your knowledgeable content!

@socemdogbrewingandgastropu8288 Год назад

I said a prayer after I watched this video. Thank you so much for posting! This may be the only front door handle removal for a G3 on RU-vid.

@glilygoss Год назад

mine didn't have the connector as mine is a basic without the keyless entry, but it took about 3 min to put on the door handle and cover over key entry ! The estimate was $100 ish just labor at the dealer. I did get my parts at the dealer as I wanted my key to fit and color to match. Thank you TRQ!

@ckkaneaster 3 месяца назад

Thx for the vid. worked out great took no more then 5 mins. the worst part was pulling the handle trigger to line up with the handle. found some random lawn trimmer twine in the street (Philly) and it worked perfectly. thx again!

@TheCovenantChild 24 дня назад

Thanks for this. 20 mins was all I needed for my 2012 Camry. No connector as well, so made it super easy. Just had to slide it in & ensure the back of the handle engaged with a release lever. In the door. Took me a bit to get that right but it finally worked

@adamdebesai 2 месяца назад

TRQ gave me a much cheaper door handle and a DIY video. What more can I ask for? I sure saved a lot of money. Thank you TRQ!

@benjaminwach1325 2 месяца назад

Just used your instructions, took me more time to find the T-30 bit than to replace the handle. Thanks for posting 😊

@85Sirex 4 месяца назад

Thank you very much for the video. I came home from work yesterday to the door handle from my daughter's 2014 Camry sitting on the kitchen table. I thought I was going to have to take off the inner door card, but this looks way easier. Thanks

@miguelchicanotitan6497 8 месяцев назад

MAKE SURE THAT YOU KNOW WHETHER YOU HAVE A CONNECTOR BECAUSE I THOUGHT MINE FELL IN THE DOOR. ( I didn’t even have one in the first place so I took off my interior door without needing to.

@TRQ 8 месяцев назад

+@miguelchicanotitan6497 Thanks for the feedback! 1aau.to/m/Shop-TRQ

@MrDTown89 Год назад

Toyota will charge you 199.99 for that

@nataliewinslow5729 8 месяцев назад

Any thoughts as to why my bolt for the lock driven with the T30 driver will not screw back in? I have replaced the handle successfully and was putting everything back together but that part will not thread.

@pedromoreno7554 Год назад

great video, my dads car had this issue. said the door handle just broke when he was opening it. I bought the handle from amazon and ima see if I can do it in under five minutes. thank you!

@michaelengle9062 7 месяцев назад

Great vid. Only thing to add...when you put the key cylinder back in,that rod end has to line up with a small receiver in the door...it doesn't always do it automatically. Body shop couldn't figure it out, tried to tell me I needed a new cylinder until I googled it....

@SonicGerkin Год назад

Thank you very much- It worked just as advertised! To get a color-matched handle I ended up at Toyota, was $ 91 for the handle. A thin piece of string did the job of lifting that latch up while installing the handle. Will keep an eye out for more of your content!

@GTFBITK Год назад

Holy sh that was easy. I put it off for two weeks. It took me longer to find the t30 than to swap them out.

@tonymontana897 Год назад

I had no idea how to do this before watching this video. I dreaded having to disassemble the door car then have to disassemble a multitude of bits inside the door like most cars are like to do. Great design ! Thanks for the video !

@bibap1659 9 месяцев назад

Super helpful. I like that the video gets straight to it. Def will utilize TRQ for similar assistance moving forward. Thanks!

@rangi7155 5 месяцев назад

Update: You need to unscrew that T30 screw MOST of the way. Ive been trying to pry it off my door for 30 minutes until i watched another video. At least on mine, i unscrewed it like that and it has teeth that keep the screw in place even when its loose. Anybody else having issues pulling the cover piece off? In the video he simply pulled it out and mine is not budging even with a screwdriver and force. Im not sure what im doing wrong.

@CVANGLER Год назад

My 2016 SE doesn’t have that connector. I took my door panel apart thinking it fell inside. What model is this video on?

@johncarlschmidt1977 8 месяцев назад

Thanks for the video....easy 5-10 minute job thanks to you

@jdudefun1755 Год назад

Do you have a video for the rear doors?

@isicarwarehouse2726 Год назад

Worked well for my Toyota Vellfire 2017 Drivers door handle - thank you 🙂

@DMoneyGetta Год назад

What is that plug that the exterior door handle is plugged into? Mine is missing, and it should unlock when I grab the door handle but doesn’t. Also my BSM system is malfunctioning on my driver side.

@nasserfilty Год назад

2012 camry does not have a connecter

@user-nb8dy9og2o Год назад

My 2013 Camry didn't have the connectors. I removed the door panel and searched inside door. Found another video in which that Camry also didn't have connecters. I got an actual mechanic to look at it. He discovered my handle somehow connects into something near the keyhole area. With door panel off, we placed door handle in place, he pushed something inside door panel to door handle and...it works now.