Тёмный
No video :(

How To Replace Front Brakes 2011-15 Kia Sorento 

TRQ
Подписаться 510 тыс.
Просмотров 55 тыс.
50% 1

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2011-2015 Kia Sorento.
• Check here for more videos on the 2011-2015 Kia Sorento: • Kia Sorento 2011-15 2n...
This process should be similar on the following vehicles:
2011 Kia Sorento
2012 Kia Sorento
2013 Kia Sorento
2014 Kia Sorento
2015 Kia Sorento
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Impact Screwdriver 1aau.to/oa/1AXA...
• Phillips Head Screwdriver 1aau.to/oa/1AXA...
• Pocket Screwdriver
• 14mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oa/1AXA...
• Brake Caliper Hanger 1aau.to/oa/1AXA...
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/oa/1AXS...
• Paper Towels 1aau.to/oa/1AXS...
• Hammer 1aau.to/oa/1AXA...
• Small Hook
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Kia Sorento 2011-15 2nd Generation: • Kia Sorento 2011-15 2n...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@TRQ
@TRQ 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@jamainrice7716
@jamainrice7716 Год назад
Best tutorial video I've ever seen..straight to the point no bs..well done sir!
@allenscott1358
@allenscott1358 4 месяца назад
Thanks Kia for not making it complicated!
@carolinaayala2272
@carolinaayala2272 7 месяцев назад
Best video EVER on how to change brakes!!!! 👏🏼👏🏼👏🏼
@TRQ
@TRQ 7 месяцев назад
+@carolinaayala2272 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
@TRQ
@TRQ 7 месяцев назад
+@carolinaayala2272 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts! 1aau.to/m/Shop-TRQ
@stevesmith-ny8jb
@stevesmith-ny8jb Год назад
Thank you for the up close and personal r&r. Although I've been wrenching since '84, you still taught me something...to clean & lube the caliper pins. 👍🏻
@TonyBamxBamx
@TonyBamxBamx Год назад
Great tutorial. Changed my brake pads last night. Just a heads up that 17mm bolt was a tuff mf bent my ratchet’s neck so I stopped and reset. Tried again and snapped the cube part in my socket. I don’t have one of those right angle drills. I got a I think 7/16th wrench and had to put another wrench on the end of it to get enough torque to get that damn bolt to budge.
@TRQ
@TRQ Год назад
+Anthony LeGrano Thanks for the feedback! 1aau.to/m/Shop-TRQ
@MarkSpaniel
@MarkSpaniel 24 дня назад
Superb video! Short and concise! Explained every facet without wasting my time, kudos!
@larryjumila2822
@larryjumila2822 Год назад
Mahalo this is the best video that I could find for doing my 2014 Kia Sorento.
@TEXASTR0NG
@TEXASTR0NG Год назад
Is there not an issue with damaging the ABS system? Or should you still open the bleeder valve?
@thefpvlife7785
@thefpvlife7785 4 месяца назад
Is it always a must to also change your rotors when changing the brake pads? I ask because the rotors in this video looked fine.
@cachemasterT
@cachemasterT Год назад
Very easy and informative video. Thanks a bunch
@nicogonzalez1801
@nicogonzalez1801 Год назад
great video, what kind of grease you used?
@ryantanner9748
@ryantanner9748 5 месяцев назад
U make this stuff look easy thanks for the kelp
@SSteil
@SSteil Год назад
Spot on Team TRQ! Thank you for this instructional video. Sincerely thankful
@otterconnor942
@otterconnor942 7 месяцев назад
Would have loved socket size and or torque specs in word bubbles
@commonsensepatriot9450
@commonsensepatriot9450 2 месяца назад
Very well done and informative video
@hquy211
@hquy211 9 месяцев назад
Front and rear same size or different? Thanks
@MaverickML-om4fm
@MaverickML-om4fm 4 месяца назад
Good exposición
@paul-andrelarose3389
@paul-andrelarose3389 2 года назад
Absolutely excellent! 2022/08/28. Ontario, Canada.
@ryantanner9748
@ryantanner9748 5 месяцев назад
We're the best place to buy brakes
@nazguess
@nazguess 2 года назад
Great vid! Thank you
@amandamholm691
@amandamholm691 2 года назад
What if you don't have a caliper compressing tool?
@jacobfeiner1767
@jacobfeiner1767 2 года назад
You could use a c-clamp with a flat plate to make sure you evenly apply pressure to the caliper.
@ReddsComedyHour
@ReddsComedyHour 2 года назад
Get a 10” C clamp. Make sure you have everything first. I remember when I taught my son first how to change brakes. 8 years ago. Boy can’t put the wrench down. Haha
@richardmourdock2719
@richardmourdock2719 2 года назад
@@jacobfeiner1767 the old brake pads work great as that "flat plate".
@NorbertStu_Legenda
@NorbertStu_Legenda 2 года назад
Thanks for the video ✌
@doncarlson8391
@doncarlson8391 2 года назад
Nicely done.
@tracybuford9243
@tracybuford9243 2 года назад
This is awesome
@ReddsComedyHour
@ReddsComedyHour 2 года назад
That’s 69lbs of torque?
@paul-andrelarose3389
@paul-andrelarose3389 2 года назад
The required torquing is 69 ft-lbs, not "69 lbs", as this would be a "linear force", not a "rotational torque".
@brwnjohnnysvage7251
@brwnjohnnysvage7251 2 года назад
What can I use if I don’t have a calliper compressing tool?
@nb9008
@nb9008 2 года назад
Use a G-Clamp
Далее
How To Replace Rear Brakes 2011-15 Kia Sorento
8:56
Просмотров 42 тыс.
Will A Guitar Boat Hold My Weight?
00:20
Просмотров 27 млн
ПРИКОЛЫ НАД БРАТОМ #shorts
00:23
Просмотров 1,4 млн
Прохожу маску ЭМОЦИИ🙀 #юмор
00:59
How To Perform a Professional Brake Job (Pads & Rotors)
38:48
Replace Front Brake Pads and Rotors: 2011 KIA Sorento
10:40
2016 Kia Sorento SX:  Front brake pad replacement
14:07
How to Replace Front Brake Calipers On Any Car!
21:04
Просмотров 394 тыс.
How to Replace Front Brakes, Pads and Rotors
8:30
Просмотров 3,2 млн
Will A Guitar Boat Hold My Weight?
00:20
Просмотров 27 млн