Тёмный

How to Replace Front CV Axle Assembly 2004-2015 Nissan Titan 

TRQ
Подписаться 482 тыс.
Просмотров 27 тыс.
50% 1

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/id/1AACV00390
This video shows you how to install new Front CV Axle Assembly in your 2004-2015 Nissan Titan. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan
Tools you will need:
• Pry Bar 1aau.to/oGR/1AXAA00020
• 14mm Socket 1aau.to/oaXS/1AXAA00015
• 21mm Socket 1aau.to/oYy/1AXAA00043
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oR/1AXAA00289
• Brake Caliper Hanger 1aau.to/ofR/1AXAA00084
• Ratchet 1aau.to/obbG/1AXAA00016
• Torque Wrench 1aau.to/oaic/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ovZ/1AXSS00035
• Liquid Thread Locker
• Floor Jack 1aau.to/oNu/1AXAA00068
• Jack Stands 1aau.to/oKp/1AXAA00065
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

1 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@TRQ
@TRQ Год назад
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@gooddaytothrive5870
@gooddaytothrive5870 Год назад
I took some notes that might be helpful for someone: 21mm 32mm cotter pins 22mm tie rod Pb blaster 19mm strut bottom 14mm top strut Crowbar for strut top 14mm cv axle hammer for removal Abs wire Upper ball join 21mm hammer Wire brush differential --Copper never seize cv axle splines and diff Upper ball join attach, reattach to diff Torque to 54 ft lbs 58 lbs ball joint cotter pin Abs connect to frame Strut reconnect 3 bolts top Bottom strut jack up control arm, hand tighten nut 22lbs strut top 3 nuts 99 lbs bottom strut nut Sway bar 17mm wrench 19 socket Outer tie rod 63lbs Have someone step on brake or put bar or large screwdriver against rotor rest against top break caliper 101 lbs hub nut cotter pin Remove safety lug nut 97lbs wheel
@killien95
@killien95 Год назад
Solid vid! Blew my cv shaft 11kms up a forestry road on snow pack. Slid off road and snap, a week of digging and a little help out and now time to fix the damage. Feeling confident about doing the fix now!
@eddieo7660
@eddieo7660 Год назад
This guy went the extra extra long way in doing this.. Just unbolt from diff and wheel bearing and remove rubber control arm bumb stoppers and you can work it out and the new one in fairly easily!🤙🤙,
@bgriffin429
@bgriffin429 Год назад
I don’t have the tools to get this done but having seen this I can definitely tell the shop that’s going to do the work that it’s less than a 2 hour job!! Lol. Great video.
@TheCracker713
@TheCracker713 Год назад
not less than 2 hours he was taking off fresh parts lol
@TheCracker713
@TheCracker713 Год назад
not to mention pickle forks when ball joints dont come apart lol
@strvinmarv
@strvinmarv Год назад
Shows you a great example of reality when youve already replaced the hub assembly lol
@Phoenixrising8313
@Phoenixrising8313 Месяц назад
Do you have a video showing how to replace the seal on the differential passenger side? How would you suggest pulling the front diff flange to replace the seal? Thank you.
@koedypaslay4733
@koedypaslay4733 Год назад
Thank you for such a great video!! Awesome job!!! You have helped me out with my project.
@northtrader
@northtrader Месяц назад
Excellent video. Thanks so much for posting this. Subscribed.. By the way - exact same color Titan as my 2007 - paint code A15?
@yaridavelascozumba6961
@yaridavelascozumba6961 Год назад
When I tighten the bolts on the differential I was able to pull it out a little bit and it leaked a little bit of oil is that normal ? After it pulled out I pushed it back in and the leaked stopped..!
@avguytx4361
@avguytx4361 Год назад
Holy cow... That rust would scare me to death.
Далее
Nissan Titan Cv Axle Replacement (tips and tricks)
6:59
БИМ БАМ БУМ💥
00:14
Просмотров 4,7 млн
Бмв сгорела , это нормально?
01:01
Аминка ❤️
00:16
Просмотров 1,1 млн
CX-9 Oxygen Sensor replacement and clearing DTC.
10:08
How to Replace Drivers Side CV Axle 08-13 Nissan Rogue
19:51
Humming Noise Diagnosis (Bad Rear Differential)
12:56
Most Common Strut Installation Mistakes!
14:02
Просмотров 1,1 млн
Фишки FORD F-150. Часть 2
0:54
Просмотров 3,1 млн
ВЫХЛОП на РЕДКИЙ VAG #shorts
0:49
Просмотров 1,7 млн