Тёмный

How to Replace Front Fender on a 99-04 Jeep Grand Cherokee 

martinbuilt
Подписаться 87 тыс.
Просмотров 26 тыс.
50% 1

Found a paint matched fender at Pic-a-Part for under $50. in excellent condition. I will show you how to remove and replace the front fender and will also show how to disconnect the radio antenna as well.
Amazon Affiliate:
Auto Trim Removal Tool amzn.to/35Z6Hew
DEWALT 20V MAX Impact Driver Kit, 1/4-Inch amzn.to/3osFg49
Dewalt 20 Volt Impact amzn.to/3f1lO9V
1/4" Drive Impact Socket Adapters amzn.to/2ShDLdW
10-Piece Impact Rated 3" Security Torx Bit Set for Impact Driver amzn.to/3iCNUus
TORX Socket Sets amzn.to/3sPcUDs
Hose Pliers Set of 3 amzn.to/3bJLOH3
Donate to Help Support Channel www.paypal.com/cgi-bin/webscr...
Facebook / martinbuilt-2351766611...
Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I may get paid a small commission at no extra charge to you. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt cannot guarantee against improper use or unauthorized modifications of this information.
#martinbuilt #jeepgrandcherokee

Авто/Мото

Опубликовано:

 

20 май 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 112   
@marcoantoniogarciabautista
@marcoantoniogarciabautista 3 года назад
Martinbuilt, the king of the WJ'S 😊
@outside2585
@outside2585 2 года назад
This was darn near the best most informative how-to video I've ever watched. Great work sir
@GarySmythe
@GarySmythe 3 года назад
Such great detail on how to replace the front fender! Thanks Martin!
@martinbuilt
@martinbuilt 3 года назад
My pleasure!
@ZZUBZERO
@ZZUBZERO 3 года назад
I know the feeling of having a little ding, just makes you crazy so I sense your relief. It's great you were able to find a fender the right color for so cheap, once again , gotta love the pick and pull!
@martinbuilt
@martinbuilt 3 года назад
Definitely, heading to the Pic-a-Part tomorrow there is a black 04 they just got in hopefully the hood is great condition.
@israelballew4155
@israelballew4155 3 года назад
I just bought an 04 overland thats the same color with a damaged front fender. Perfect timing sir.
@lorenzodelacruz1887
@lorenzodelacruz1887 3 года назад
Great to see you again. Thanks for the valuable information.
@martinbuilt
@martinbuilt 3 года назад
More to come!
@StephenRobertsMyFrontDoor
@StephenRobertsMyFrontDoor 2 года назад
Awesome, thank you. I like that you leave in the little errors so we can see you correct for them and explain them. Thank you for sharing this information. I had someone back into my car while parked in the street in front of my house, then leave without acknowledging what they had done. Your video will go a long way toward my repair.
@martinbuilt
@martinbuilt 2 года назад
Thank you. I'm glad to hear you liked it and found it helpful. I like to put a lot of detail into my videos so that anyone can understand and give them the confidence that they can perform the task.
@YOUZTUBE2000
@YOUZTUBE2000 2 года назад
Martin Great job on the videos! A real pleasure to watch- real informative, well explained especially how you edit in circles and arrows. Very well made! Found your channel because I have a ‘99 XJ, ‘04 WJ to name just a few. Thank You!
@martinbuilt
@martinbuilt 2 года назад
Thank you. I'm glad you liked it And found it helpful and informative. I also have 04 Jeep Grand Cherokee as you can see and a 98 XJ
@YOUZTUBE2000
@YOUZTUBE2000 2 года назад
@@martinbuilt I noticed that-good content. Getting ready for valve train rebuild on my “ticker” ‘14 Chry T&C, rockers, lifters, maybe phasers? I’m certain to have a least 1 bad cam shaft!
@davestewart9146
@davestewart9146 3 года назад
Always a great video Martin 👍😁
@martinbuilt
@martinbuilt 3 года назад
Thank you, I really appreciate that. 😊
@thomasclifford3470
@thomasclifford3470 3 года назад
Super helpful video. Made this project so much easier
@martinbuilt
@martinbuilt 3 года назад
Great to hear, glad you liked it 👍😊
@JF32304
@JF32304 2 года назад
I just picked up an 04 H.O. and have to replace both front fenders. You have such great videos! Your instruction is spot on! Wish I lived down the street I'd bring mine over and we'd work on both units lol. Yours is crazy good looking! Way to go! God bless you!
@martinbuilt
@martinbuilt 2 года назад
Thank you, I really appreciate that. Just made a move to a bigger shop I'll be putting a video out on that.
@northwingflyer
@northwingflyer 3 года назад
Thanks. I just changed the right side on our 2000 Grand Cherokee. It wasn't that hard to do, but it made it even easier knowing what to expect.
@martinbuilt
@martinbuilt 3 года назад
Glad to hear you found it helpful.🙂
@justinmiles977
@justinmiles977 Год назад
Excellent vid. Thanks Martin
@martinbuilt
@martinbuilt Год назад
Thank you. I'm glad you liked it and found it helpful.
@mzwandilenzimande4621
@mzwandilenzimande4621 3 года назад
Thank You Martin. Great content as always.
@martinbuilt
@martinbuilt 3 года назад
Glad you enjoyed it 😉
@happysaylar8263
@happysaylar8263 2 года назад
Dude............Best Video I have ever seen .....YOU KNOW what you are doing it is quite evident!! I hate all the videos on here where a complete NOVIS tries to demonstrate how to do something....drives me bonkers!!! Great Job!!! Thanks! Tim....Alaska
@martinbuilt
@martinbuilt 2 года назад
Thank you 😊 I really appreciate that 🙏
@pablomarquez4431
@pablomarquez4431 3 года назад
About time someone made a fender removal video. Thanks Martin! As for your hood I would do that repair yourself and have it painted by a shop since you got a hood scoop.
@martinbuilt
@martinbuilt 3 года назад
You are welcome 😊 Yeah I may just have to repair it and have repainted.
@willschimek9359
@willschimek9359 Год назад
What a great video! I don’t think he could have made it any better. I live in New Hampshire and I have NO garage. I’ll have to replace my right fender in the driveway, hopefully with no snow. I love my rust bucket!
@ascendantrobin3230
@ascendantrobin3230 3 года назад
what a beautiful pick-a-part find! anyone in the “salt belt” knows these WJ fenders rust out! Ive done this, and making sure the gaps are proper was not easy!😅 i love the grand cherokee videos- thing is looking fierce, nice job Martin😎🇺🇸
@martinbuilt
@martinbuilt 3 года назад
Yeah I was pretty pleased finding that Fender especially in that great condition. Thank you 😊
@jonstrande2074
@jonstrande2074 3 года назад
Awesome job. Your G-Cherokee looks mean and clean.💪
@martinbuilt
@martinbuilt 3 года назад
Thanks! 👍
@jamesdewer
@jamesdewer 2 года назад
Your rig is packed with ideas and CLEAN! I just put my 01 WJ 4.7 4x4 on the driver side, avoiding a Collison I capsized it. Looking to save time, if not money on parts I searched for some insight in performing the job, of course your videos are top of the heap. Enter WJ and who always is on top with the most subscribers? MARTINBUILT! The WJ is built like a Russian Army T-73. Thanks for another concise and time saving video. Looks great like all your work!
@martinbuilt
@martinbuilt 2 года назад
Thank you, James. I really appreciate that. It's always nice to hear that my videos are helpful. I love the WJ series. I think it's the best-looking Grand Cherokees they ever made. Stay tuned, I got a HUGE surprise coming up in May of 2022 Maybe sooner than that.
@drikkku
@drikkku 3 года назад
I love your jeep Martin. It's really in a mint condition.
@martinbuilt
@martinbuilt 3 года назад
Thank you, I do love this WJ
@codcoffee1500
@codcoffee1500 2 года назад
This was fantastic, thanks!
@martinbuilt
@martinbuilt 2 года назад
Thank you. I appreciate that.
@motorsportzeka
@motorsportzeka 5 месяцев назад
thnxxx
@bigbeaddles
@bigbeaddles 3 года назад
you have a really nice jeep man
@martinbuilt
@martinbuilt 3 года назад
Thank you, I appreciate that.🙂
@NotOnline777
@NotOnline777 3 года назад
Thank You!
@martinbuilt
@martinbuilt 3 года назад
You are very welcome, glad you found it helpful. 🙂
@normbrag
@normbrag 2 года назад
Very awesome work there, I'm about to do the same job there myself,.. Thank you for the tutorial,... Wish me luck...
@martinbuilt
@martinbuilt 2 года назад
You can do it 🙂 I'm glad you found it helpful 👍
@stephenoshaughnessy2279
@stephenoshaughnessy2279 10 месяцев назад
good video
@martinbuilt
@martinbuilt 10 месяцев назад
Thank you. I'm glad you liked it and found it helpful. Thanks for watching.
@brynnond.6952
@brynnond.6952 3 года назад
Might need to do this for my rusted out drivers side fender on my 2000 grand Cherokee
@martinbuilt
@martinbuilt 3 года назад
It is fairly easy but in your cause getting the hardware out (because of the rust) will be the hardest part.
@s.b5412
@s.b5412 3 года назад
I love it
@martinbuilt
@martinbuilt 3 года назад
Thank you, me too! 😎
@marcospaulino6735
@marcospaulino6735 3 года назад
👍 Ótimo trabalho(good job). São Paulo Brasil. Obrigado.
@martinbuilt
@martinbuilt 3 года назад
Thank you, Marcos 🙂
@uniquehorn1480
@uniquehorn1480 8 дней назад
Thank you, sir!
@martinbuilt
@martinbuilt 8 дней назад
You are very welcome I'm glad you liked it and found it helpful. thank you for watching.
@tedz74
@tedz74 3 года назад
Regarding the antenna cable, instead of fishing it through the inner fender, you can also disconnect it at the whip. The cable should just pull out of the underside of the antenna base.
@mractivatedmelinan
@mractivatedmelinan 6 месяцев назад
Ty bro
@martinbuilt
@martinbuilt 6 месяцев назад
You're very welcome i'm glad you liked it and found it helpful.
@agporsch
@agporsch 2 года назад
Excellent video, it helped me quickly replace the passenger side fender on an 02 grand cherokee. I'm curious, do you have any videos on the antenna base assembly itself? I tried removing the nut with the proper 3-prong socket, but the plastic has seemed to mold/fuse with the nut. I basically mangled the antenna base assembly trying to remove it, and can no longer secure the antenna to the new fender. I tried going to the junk yard to get a replacement antenna base, same problem. Thanks for any tips/links you can provide.
@allensnook7760
@allensnook7760 3 года назад
Perfect timing martin,im just about to change my drivers side fender has a case of northeast fungus rot just on fender wheel lip top.i held it off with bondo but now thats peeling.so time to do it.!!are you gonna make some cool sliders for the rockers.ive got the chrome pipe type on but dont truly like them they stick out to far.and wouldnt provide any protection.its all show no go.ok well good to see ur still doing content!snookie pa.
@martinbuilt
@martinbuilt 3 года назад
Good luck with it. You coming from the rust belt I'm sure I made made this look easy. Spray all the hardware and let it soak for days before attempting to remove any of it.
@romeogiorgadze7847
@romeogiorgadze7847 Год назад
very good video dude. please tell me where to buy the front cladding is exactly the kind of hachu that stands by your car I will be grateful if you tell me
@farerse
@farerse 3 года назад
nice job, I think you will have that car for the rest of your life!
@martinbuilt
@martinbuilt 3 года назад
I think so too!
@damianfarnsworth7474
@damianfarnsworth7474 2 года назад
Getting the same color part rarely match but black generally doesn't matter
@Grumpy2Nice
@Grumpy2Nice 3 года назад
Should work on the xj more ?
@BigWood3131
@BigWood3131 2 года назад
Good video. Where did you get your bumper cover-grill from
@martinbuilt
@martinbuilt 2 года назад
Thank you. The bumper cover is the factory original and then the grille is one that I custom built here is a link to the video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GLnlaWFElWM.html
@xGuerrilla1980x
@xGuerrilla1980x 3 года назад
you should do a video on specs of the jeep
@xGuerrilla1980x
@xGuerrilla1980x 3 года назад
power/torque 0-60, whatever you might know.
@georgejefferson378
@georgejefferson378 3 года назад
great, clear video.. I'm not clear why you need to unhook the antenna wire inside. Cant the antenna just be swapped?
@martinbuilt
@martinbuilt 3 года назад
Yes, exactly, thank you
@arjay777
@arjay777 3 года назад
I had a little ding like that on the gas tank of my Triumph Tiger TR6, I looked at it every day for 5 years. My eyes were always drawn to it. It drove me nuts but I didn't want to Bondo and repaint the tank from the original metallic green which were identical to the fenders. I never would have matched the fenders and then THAT would have driven me nuts. Dings are very annoying.
@martinbuilt
@martinbuilt 3 года назад
I feel your pain, I could have just bought a new or used fender that didn't match but then I would have to get it painted and that would be at least $200 so with a little patience it paid off.
@javiercoronel1169
@javiercoronel1169 Год назад
I need that fender, cant find one here in mexico tijuana $$$$
@Rembran
@Rembran 3 года назад
I always think to myself while watching your videos, you have an excellent beard. Consider beard modelling my guy.
@martinbuilt
@martinbuilt 3 года назад
lol.😆 Maybe one day.
@ivansaucedo7682
@ivansaucedo7682 3 года назад
What size is the deep socket for the two inner screws closer to the door?
@martinbuilt
@martinbuilt 3 года назад
10mm
@davethayoungan9618
@davethayoungan9618 2 года назад
I have a gap between the side of my driver headlight and the fender..what do you think might be the cause of it? Both my oem and aftermarket light have a fitment issue
@martinbuilt
@martinbuilt 2 года назад
Check the header panel for breaks in the plastic this could cause the headlight to move and cause that gap.
@MeDicen_Rocha
@MeDicen_Rocha 2 года назад
On laredos, do I need to drop the rocker cover in order to remove the fender? I cant seem to be able to find the two bottom screws
@martinbuilt
@martinbuilt 2 года назад
Yes you're most likely need to remove the rocker cover.
@Y0WIE-W0WIE
@Y0WIE-W0WIE Год назад
How do I pull the fender up towards the headlight more?
@martinbuilt
@martinbuilt Год назад
You may need to add a shim
@tonyphillips4981
@tonyphillips4981 3 года назад
What's going on with the Dakota you bought?
@martinbuilt
@martinbuilt 3 года назад
I got something coming soon, it is hard to divide my time with three vehicles.
@michaelshelor3206
@michaelshelor3206 3 года назад
Who makes that cowl hood?
@martinbuilt
@martinbuilt 3 года назад
I used an MMD 71323-00 hood scoop that I purchased from www.americanmuscle.com for 138.99 free shipping. Made to fit the 05-09 Mustangs.
@semihyesil
@semihyesil 3 года назад
hey martin i want to host you in turkey maybe we will do something for my 2004 GC 2.7 wj when it comes :)
@martinbuilt
@martinbuilt 3 года назад
I'm faltered 🤗
@semihyesil
@semihyesil 3 года назад
@@martinbuilt you’re still strong king of wj 🤴🏻
@simorebuths7301
@simorebuths7301 2 года назад
Did you have to take the wheel off?
@martinbuilt
@martinbuilt 2 года назад
I would recommend it, It makes it a lot easier.
@SmAfzalur
@SmAfzalur 3 года назад
Your Grill is so nice... I like it... please Let me know the shopper address
@martinbuilt
@martinbuilt 3 года назад
Thank you, I appreciate that, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GLnlaWFElWM.html
@SmAfzalur
@SmAfzalur 3 года назад
@@martinbuilt Thank You Very Much... I have 2001 Jeep Grand Cherokee... I watched RU-vid & Fixed Myself...
@martinbuilt
@martinbuilt 3 года назад
@@SmAfzalur Glad, you found it helpful.
@mrmo666
@mrmo666 3 года назад
lol I bought new fenders, had them painted, and put them on recently.
@SledsandGear
@SledsandGear 3 года назад
How much did that run? I need to do the same thing!
@mrmo666
@mrmo666 3 года назад
@@SledsandGear fenders are cheap, even new. Now professionally painted, not so cheap.
@martinbuilt
@martinbuilt 3 года назад
and that's why I was hoping to find them at the salvage yard.
@nathanszabrowicz2272
@nathanszabrowicz2272 3 месяца назад
Why didn’t you just jack the car up so the sway bar tilts and the jug drops right out
@angiestrickland3793
@angiestrickland3793 Год назад
Looks like a good video but no sound 🤷‍♀️
@tonyfourpaws4511
@tonyfourpaws4511 2 года назад
OMG I want that hood!!!! Please! I'll like, subscribe and share!!!! Lol... Jk. I always do any ways
@martinbuilt
@martinbuilt 2 года назад
This is the MMD 71323-00 hood scoop that I purchased from www.americanmuscle.com made to fit the 05-09 Ford Mustangs. How to Install a Mustang Hood Scoop on a 99-04 Jeep Grand Cherokee ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NPPUzpU-6b8.html Thank you for supporting the channel.
@nanowj209
@nanowj209 3 года назад
Do you have a instagram i can follow you on ? Always learn new things watching your videos
@martinbuilt
@martinbuilt 3 года назад
Yeah I believe I do or at least I did. I never did much with it.
Далее
How to Fix Death Wobble 99-04 Jeep Grand Cherokee WJ
13:25
How to Replace Rear Brakes 99-04 Jeep Grand Cherokee
13:54
Replacing the pinion seals on a Jeep Wrangler...
31:33
Lool 🤣💃🏻 BMW i4 ❤️
0:14
Просмотров 5 млн
Это самая гигантская машина!
0:26
Фишки FORD F-150. Часть 2
0:54
Просмотров 3,1 млн
ВЫХЛОП КАК У АХМЕДА WENGALLBI
0:59
Просмотров 535 тыс.