How to replace front glass and digitizer on Samsung Galaxy Tab 2 10 1 

Thank you for the time and effort you put into this video. I’m researching ways to do this project. Sharing knowledge is a admirable quality. And anyone that didn’t positively love this music is probably just not rehearsed enough to get the connection. Very endearing.

No matter if it's the correct way or the incorrect way (from comments below)... It worked a treat for me... I went from a repair cost of $170+ to $23... Thank's heaps :)

Thank you. Not really a trouble-free job , but I managed quite well by means of your instructions. 10/10.

Great video, thank you. I can't remove the frame around the screen. my Tablet model is MS-T550. D you think the frame is glued on this model? Or any tips you can give me will be highly appreciated :) Thank you.

What degree do you use the air gun? And nice video (Y)

Hi, is the same process with Tab 10.5? I need to replace my glass, too.

sweet, thanks dear you saved my $20

any place you know of in the US to get a screen for a Samsung Galaxy Tab A SM-P550 Like yours with the adhesive on it ?

My samsung has rev 04 digitizer and i cant find this model anymore do you have some suggestions how to find it?

does the touch still work even though its cracked?

Is it possible to replace only the digitizer on a samsung model SM-P605

The music in this video is truly annoying....aside from that, great info!

hlo i have a bauhn tab and its 10.1 and have 170×260 mm display how can i get that resplacement screen.

You said "iPad body" at 3:25 lolz!

tab 8 can be fixed or not

Why did you remove the battery and loosen all three cables just to replace the digitizer glass? Are you afraid the screen will get warmed up so much that the battery will heat up and explode? :-D "iPad body"? It's a Samsung. Looks like your heating did nothing or you should keep heating it while working on it - you could just have pulled a piano wire trough there. Nice video, nice that it is sped up.

thx for he mi!!!!

Will the suction cups work if your screen is all cracked to hell

i just used a knife. worked well for me.

can it switch on without a digitizer ?

merci

think i broke the ribben cable that connects the board to the actual screen

I replaced mine. Now some parts of the screen dont work. How is that possible? I did everything right..

you left air under the screen bubble4s of air how to fix that

Oh, slow removing the film over the tape so sexy rawr.

ola

glass u replaced dint look broken. thanks anyway.

Good music. A bit scary

Hi

This is not entirely correct way to replace Touch screen digitizer as removing back cover first will break off half of the tabs. I realised that through first-hand experience :-(( Right way would be to remove digitizer first , pull out LCD screen, remove dozen of screws which will release back cover along with the frame. Then you can detach the cable.... Unfortunately the right way takes too much time.

You can't be in a hurry. Bottom line.

trying to do this fucked with me mentality and cost me a screen and a new tab it was utter fail get professional help do not try this at home

The back panel is 1 unit take it off as well in doing of what u do then it breaks the clips