No video :(

How To Replace Front Hub Bearing 2010-16 Buick LaCrosse

Подписаться 483 тыс.

Просмотров 43 тыс.

50% 1

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ic/1ASHF00469
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2010-2016 Buick LaCrosse.
• Check here for more videos on the 2010-16 Buick Lacrosse: • Buick Lacrosse 2nd Gen...
This process should be similar on the following vehicles:
2010 Buick LaCrosse
2011 Buick LaCrosse
2012 Buick LaCrosse
2013 Buick LaCrosse
2014 Buick LaCrosse
2015 Buick LaCrosse
2016 Buick LaCrosse
Tools you will need:
• Pry Bar 1aau.to/oeR/1AXAA00020
• 10mm Socket 1aau.to/oos/1AXAA00017
• 18mm Socket 1aau.to/ohz/1AXAA00043
• 21mm Socket 1aau.to/ohz/1AXAA00043
• 22mm Socket 1aau.to/oa3/1AXAA00266
• 32mm Socket 1aau.to/oA/1AAST00003
• 32mm 12-point axle nut socket
• Brake Caliper Hanger 1aau.to/oam/1AXAA00084
• Slide Hammer
• T30 Socket
• Socket Extensions 1aau.to/ora/1AXAA00015
• Torque Wrench 1aau.to/okq/1AXAA00044
• Copper Anti-Seize
• Hammer 1aau.to/oeL/1AXAA00091
• Wire Brush 1aau.to/obv/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Buick Lacrosse 2nd Generation 2010-2016: • Buick Lacrosse 2nd Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

18 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@garycurtis2511 Год назад

Good beginning to end steps. Also, thank you for the torques and angles. Summary off my LaCrosse rear bearings. First one I used a 5lb slide hammer. 2 hours, over 200 hits, plus a cold chisel (now trash) and half a can of PB Blaster later I had the bearing out. Oh, plus 3 lug nuts that became expendable after the slide hammer destroyed them. 2nd bearing I bought a 10 lb weight. Same process except about 100 hits, 3 bolts, and another chisel. Great video, but especially for salt prone areas be prepared to use excessive force. Also, if the 3 bolts on the back are giving you issues, consider separating tire rod end and removing the axle. New bolts for the caliper brackets are cheap and come with loctite pre-applied.

@kpsgenius 3 года назад

Excellent walkthrough, thank you very much

@Matt0012873 4 месяца назад

Thank you for the video. A perfectly detailed how-to. I did have to build a slide hammer though!

@TRQ 4 месяца назад

+@Matt0012873 Thanks for watching our video! 1aau.to/m/Shop-TRQ

@rickygoodman4609 2 года назад

Great video. How long did this take you start to finish? Thank you in advance!

@jayleabradley5049 Год назад

Thank you I have the same car and followed it through

@MiguelSis-hn8xt Год назад

Is is the same steps for if you have to do the rear and replace the speed wheel sensor ?

@theragnofam3917 Год назад

Any new greasing of the hub required?

@MrRice-kb3dv Год назад

This was very simle👍

@Davethreshold 3 года назад

Hi! Thank you for this. I have a 2015 Buick Regal. It may need a front, right wheel bearing. What is a fair price that a mechanic may charge, out the door, minus taxes?