Buy Now!
New Control Arm Bushing from 1AAuto.com 1aau.to/ib/1ASM...
This video shows you how to install new front lower forward control arm bushings from TRQ on your 2003-2007 Honda Accord.
Estimated installation time for a professional technician is approximately: 2 hours 54 minutes
This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/oab3/1A...
• 16mm Wrench
• 17mm Wrench 1aau.to/oag2/1A...
• 17mm Socket 1aau.to/ocgd/1A...
• 19mm Socket
• 36mm Socket 1aau.to/odm/1AA...
• Bushing Removal Tool
• Press
• Locking Pliers 1aau.to/opE/1AX...
• Side Cutters
• Ratchet 1aau.to/ocgZ/1A...
• Socket Extensions 1aau.to/ocgd/1A...
• Torque Wrench 1aau.to/objB/1A...
• Gloves 1aau.to/obkx/1A...
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack 1aau.to/oaDM/1A...
• Hammer
• Jack Stands 1aau.to/oaqr/1A...
• Rubber Mallet
• Wheel Chocks
• Wire Brush 1aau.to/ozs/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
6 сен 2024
