How to Replace Front Shock & Spring Assembly 2007-2014 Cadillac Escalade ESV

Подписаться 546 тыс.

Просмотров 19 тыс.

50% 1

Buy Now!
New Shock & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASH...
New Shock & Spring Assembly Set from 1AAuto.com 1aau.to/ia/1ASS...
This video shows you how to install a new shock and spring assembly designed specifically to fit your 2007-2014 Cadillac Escalade ESV. A shock and spring complete assembly simplifies installation. You don't need to separate the spring from the shock absorber.
This repair was done on a 2014 Cadillac Escalade ESV Luxury 6.2L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Cadillac Escalade ESV
2008 Cadillac Escalade ESV
2009 Cadillac Escalade ESV
2010 Cadillac Escalade ESV
2011 Cadillac Escalade ESV
2012 Cadillac Escalade ESV
2013 Cadillac Escalade ESV
2014 Cadillac Escalade ESV
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obis/1A...
• Pry Bar 1aau.to/oSZ/1AX...
• 18mm Wrench
• 13mm Socket 1aau.to/obst/1A...
• 15mm Socket 1aau.to/obst/1A...
• 18mm Socket
• 22mm Socket 1aau.to/ood/1AX...
• Trim Tool Set 1aau.to/o93/1AX...
• 1/2 Inch Impact Gun 1aau.to/osv/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obzs/1A...
• Torque Wrench 1aau.to/oaCZ/1A...
• Gloves 1aau.to/o3x/1AX...
• Rust Penetrant
• Safety Glasses
• Floor Jack 1aau.to/o4a/1AX...
• Jack Stands 1aau.to/oSC/1AX...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Cadillac Escalade 2007-14 3rd Gen: • Cadillac Escalade 2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@trainnedgunner5189 2 месяца назад

TRQ, I want to say (from a humble TAC aircraft tech) that your videos are on point and your product looks sound. I do have a question: Why smaller lower bolt and upper nuts than the OE? If they were the same size, would that mitigate the need for alignment? Thank You!!!

@juanparra180 5 месяцев назад

I bought shocks from yall and got them installed and I like the ride and everything but now my car can’t go past 80 mph and I made sure everything was connected properly I was wondering if yall have any idea how to fix that

@antcap503 Год назад

A couple questions, Do the bolts need to be torqued? Also, does this keep the autoride in front or bypass it. I'm looking to swap put both front and rear and want to keep my autoride I have 08 escalade ext z55, I found struts for the back that keep autoride, but haven't found one's for the front that has the spring already attached just stats by themselves.

@fromundadeez4823 11 месяцев назад

Is this the same for a premium esv with air ride?

@davew102 7 месяцев назад

Thanks for the assist. It was as easy as the video showed (although it took me longer than 11 minutes). Great video. Note that I think the 1A Auto shocks in the video would have fit my Tahoe with the same Escalade "autoride" suspension, but I had to purchase elsewhere where they guaranteed the fit. (1A Auto support said no). Possible missed opportunity for 1A.