How to Replace Front Strut Mount 2003-2008 Toyota Corolla 

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

New mount. But everything else will fail the day after :D Anyway, you make it look easy. Very nicely done!

Great presentation, first one I've seen which include the important Torque Settings, which is crucial when doing the job correctly.

good job, all you need is to show what the damaged part looks like

Great video. I wish my mount bolts were accessible like these.

The free play in the two lower bolts on the strut DO have an impact on the alignment. I’ve personally tightened the top bolts before I put the lower two in and it gets the alignment way closer to the actual original. And yes I have tried this doing bottoms first and it’s way more out of alignment.

Good informative demonstration

Thanks, do you think there should be a rubber mount on the top between the chassis and the strut Mount, or it's always without a rubber layer. Was just thinking it could help take some sound and vibrations off the chassis.

The upper spring seat rotated out of it's original position when you tightened the mounting nut. Does that not matter?

What if the top mount is having a small gap after is install and when turning the weeel the top hit the side of wall and make a clunks noises strud is new top mount and

Will the trq mount work with kyb strut

Use some penetrating fluid!