How to Replace Fuel Pump 07-12 Nissan Altima

Подписаться 480 тыс.

Просмотров 136 тыс.

50% 1

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFPU01426
Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 2007-12 Nissan Altima.
• Check here for more videos on the 2007-12 Nissan Altima: • Nissan Altima 2007-201...
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oyn/1AXAA00013
• Pocket Screwdriver
• Bent Nose Pliers
• Needle nose pliers 1aau.to/odQ/1AXAA00051
• Needle nose pliers 1aau.to/odQ/1AXAA00052
• Cloth Rags 1aau.to/odX/1AXSS00035
• Brass Punch
• Hammer 1aau.to/ogQ/1AXAA00091
Subscribe: / @trq
Check out our playlist:
Nissan Altima 2007-2012 4th Gen: • Nissan Altima 2007-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@Mushroomhaus0001 5 месяцев назад

Thanks for the video. I should’ve had it done in 30 minutes but it never goes that way. Took me about 3 hours total. Some tips for anyone tackling this: - the punch and hammer is very useful. Spend the $10 on a large brass punch from Harbor Freight or something. Trust me. - even with a punch it might be difficult to get the ring off. Just keep trying. Hit it on the shoulder with the punch and hammer, not the longer part on the ring. You’ll be able to make more force by hitting it on the shoulder. Hitting it on the longer part pointing backwards will bend it but you can just bend it back when you get it off. - Pulling out the pump is frustrating. At some point after trying for 30 minutes, I just decided to pull up very hard and it finally came out. Spilled a bunch of fuel but mine did not come out as easily as the video. The replacement pump is much easier to put in. - yes, needing to push down on the pump to install is normal. You’ll need to use some amount of force to push the spring down. - reinstalling the ring: apply some silicone grease to the contact points of the metal ring, top and bottom. Just use a very thin layer all around. Makes reinstall of the ring a breeze as it slides right on with each tap. Wipe the silicone off the top once you’re finished so it doesn’t attract dirt. But there should still be some silicone under the tab itself, which means if you ever need to take the ring off again, it’ll be way easier than this time! Good luck!

@vincentcoelho 2 года назад

Very professional. Every detail was covered on a well done video. Thanks

@AutoMotivate 3 года назад

Hey! you are from 1AAuto! Im glad you decided to do this on your own!

@papitas2843 4 года назад

Nice explanation and great camera work! One suggestion: how about taking a vacuum and some rags to the surrounding area(s) prior to removing the lock plate to limit the amount of grit & grime that could potentially fall into the fuel tank and create more work for the filter? Just a suggestion.

@654321389 4 года назад

Exactly..blow out all the dirt and clean it up before you take anything apart.

@jeffreybraley7294 Год назад

Fixed my daughters FP in about 20 minutes because of this video. Thank you for posting!

@Mikhail.B.Sidorov 2 года назад

Nice, clever, step by step clear explanation - the best what i could see!!! thanks, good luck!

@sylvainguinepain5624 5 месяцев назад

Great video! Very clear. The price estimates online for this job vary widely from $150 to $1.500. Given than the part costs about $50, there is no way the whole process should take more than 2 hours and cost more than $200.

@abeltarango583 2 года назад

Learned a new mechanic term, hookydoo. This is a great video. Saved me a ton of money and time.

@kimberlyevans7662 Год назад

You are absolutely awesome !! Thank you so very much! I couldn't have done it without you !!!

@maggieward8913 3 года назад

I don't need a man when I have youtube, thanks brother!

@Cola64 4 года назад

Let me just say You made that look easy ! i was going to rent a jackhammer at one point than a miracle happened right after I finished rolling around in my driveway crying like a 3 year old on the play ground I figured one last tap before i call the tow company to take it to the junk yard and Bam ring came loose 🍼🍻 now onto the compressor 😫

@MegaHugro 4 года назад

Well done and excellent suggestion to use a brass punch to avoid sparking.

@andredobbs5390 Год назад

Very educational and informative. Thank you. I think I'll subscribe now

@joserivera-vs7kw Год назад

great way to explain how to do it,god bless you

@edwinsmith6690 7 месяцев назад

I liked your video. You spoke plain english which made it very easy to understand. I also liked the way you would say hookey do's

@Tommy_Mac 2 года назад

Great video! This video also applies to the 2010 Maxima (7th gen). I used a spray bottle with a little soap mixed in water and a shop vac to clean up the area around the sender. I also disconnected the fuel pump electrical connector, started the engine until it stalled. I sprayed some wd40 on the lock ring for disassembly, used a bit of silicone grease on the seal (to keep it positioned) and lock ring tabs when reassembling to make it easier. Ezy peazy.

@TRQ 2 года назад

+TommyMacDaddy1 Thanks for the feedback! 1aau.to/m/Shop-TRQ

@Cola64 4 года назад

Great videos Very informative 🤙🏻🍻

@jamesgodde2145 2 года назад

Excellent video.

@Jsart87 2 года назад

Great video. This doesn’t seem crazy intense. Why does Nissan want to charge me $900 for a 30-40 minute job?

@cocolokcocolo136 3 года назад

Your are a great teacher sir

@TRQ 3 года назад

+Cocolok Cocolo Thanks for watching our video! 1aau.to/m/Shop-TRQ

@asgharkhan5401 3 года назад

Excellent job

@joserivera-vs7kw Год назад

Great exponatikn how to do it...this how many need to start a video going to the point ..good job..God bless you..

@selfdefender8609 Год назад

Thank you for the time I saved!

@805fishing9 4 года назад

Good video simple and to the point

@fallofthezombies1379 3 года назад

The way he says vehicle totally kills me. Good job guy.

@kaddis01 3 года назад

Bigger punch and bigger hammer. Got it. Many thanks!!

@mytomtv3500 3 года назад

Excellent video

@TRQ 3 года назад

+thomas mensah Thanks for watching our video! 1aau.to/m/Shop-TRQ

@thomasmoreland5749 Год назад

Loved your video. Without it,I would have tried to drop the tank.😂

@JerryGsr 2 года назад

Good video brotha

@AntonioMartinez-du8ps 3 года назад

Do you know where the pump is on a 2010 altima coupe?

@dannyzoto1531 3 года назад

What is theres a slight whistle sound after turning car on ?

@bergfeldian 3 года назад

THANK YOU.

@ethanburr943 10 месяцев назад

The fuel filter is also in that fuel pump kit correct??

@ravileos1 2 года назад

I followed your instructions and after installing, it cranks very long and never starts. Can suggestions greatly appreciated, right now cannot do anything. FIX: I used Delphi FG0986 for Altima 2011, the plug and connector didn't snap in completely I have to push it hard. Thanks to one reviewer in Amazon. However check engine light is still on, will drive some miles and update again

@brandiw752 2 года назад

How’s it going now?

@davidwalker2781 3 года назад

Which hose in the video is the Fuel OUT hose,...and which hose is the vapor hose, back IN.??

@apostasiaelegcho5612 2 года назад

Is the fuel filter inside the fuel pump assembly? I can't find a fuel filter anywhere on this car, and I'm getting a message on my screen that I need to change the fuel filter.

@codycrabtree3684 3 года назад

Thanks

@axelbalderrama141 3 месяца назад

Do those fuels lines have a gasket in them because mine is leaking from the one with a blue clip

@joshuapyfer6616 Год назад

So I got some dirt and stuff in my gas tank when I took out the fuel pump, should I be fine?

@ThomasDeLello 5 месяцев назад

Question: Is the Fuel Filter built into my fuel pump of external to it...? 2008 Nissan Altima.

@24KGoldbackGorilla 5 месяцев назад

Do you have to relearn the computer after disconnecting the battery?

@brucemccallister7892 2 года назад

Excellent description. Would it hurt anything to spray lubricant like WD 40 on the lock ring to make it easier to remove and reinstall?

@jorgepizarro3327 2 года назад

No it wouldn't hurt

@randymarsh723 3 года назад

Loved the video, Just replaced mine, but not it’s not starting or cranking

@TRQ 3 года назад

+randymarsh723 Thanks for checking us out!

@shamrock32 3 года назад

Did you go figure it out?

@blacknightassassin54 2 года назад

Lmfao they gave no fuks

@edwinjacobo4112 2 года назад

Relearn reset procedure

@macetherebel733 5 месяцев назад

Now what if you did everything step by step. But your gas light comes on when it's gas in the car? What would cause that error?

@ilahall558 2 года назад

What size is the brass punch

@WV591 Год назад

Are these TRQ pumps reliable?

@aco3495 2 года назад

Hello thank you for the video, would you happen to know why the fuel filters prices range so much? For example for the link and filter you provided it is less than 100 whereas my local autozone told me these filters range to upwards up 600 dollars

@trecef5075 2 года назад

Autozone makes their money by overpricing their parts.

@shonahenderson8034 2 года назад

Yo! I literally just left AutoZone and was quoted $400 brand-new lifetime warranty or a refurbished one for $185 with 1 year warranty. I'm going to the picknpull

@ilahall558 2 года назад

Where can I get the brass punch?

@opaulofranco 2 года назад

How to know if I need to replace the fuel pump? I have a Altima 2010 2.5, and it is making only 5km per litre (like 13 miles per gallon). I am thinking about cleaning the injectors, but I am not sure if it would be enough, as the Altima can't be serviced by changing the fuel filter since it is part of the pump. Opinions? Thanks!

@nihil5222 2 года назад

My 2011 2.5 has a bad fuel pump. Usual symptoms are rough idle/hesitation and no power upon acceleration. My car won’t even get up to 20mph with full throttle up a hill and I can hear the pump when I turn the car on. I used a fuel cleaner first and that helped out somewhat but either way that pump needs to be changed. For your case, if you are experiencing any of the problems I listed then a pump it probably required. If not then you may need a tune up or it could be your driving style

@prestonreynolds4604 7 месяцев назад

I bought your brand of fuel pump for my vehicle and it didn’t work, I have tried 1 other aswell and they both haven’t worked, I didn’t everything in this video and yet it always fails to start after a replacement. Do I need to prime the pump at all? Or is there anything I could be missing?

@prestonreynolds4604 7 месяцев назад

When I put the original pump back in, it runs but not well