How to Replace Fuel Pump Module Assembly 2000-2006 Chevrolet Tahoe

Подписаться 479 тыс.

Просмотров 43 тыс.

50% 1

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ib/1AFPU00407
This video shows you how to install a fuel pump module assembly on your 2000-2006 Chevrolet Tahoe. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Pry Bar 1aau.to/oQQ/1AXAA00020
• 15mm Socket 1aau.to/obnd/1AXAA00015
• 8mm Socket 1aau.to/oa4v/1AXAA00017
• 1/2 Inch Ratchet 1aau.to/oacP/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/oa4v/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obnd/1AXAA00015
• Gloves 1aau.to/oU6/1AXSS00048
• Safety Glasses 1aau.to/oNm/1AXAA00343
• Brass Punch
• Floor Jack 1aau.to/oY2/1AXAA00068
• Pick 1aau.to/oLZ/1AXAA00037
• Rubber Mallet 1aau.to/ogs/1AXAA00413
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

30 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@TRQ Год назад

√ Watch the Video

@_zebracakez_4249 Год назад

Wouldn't it be nice if you could just lift up the seat above the tank to access it

@waltergalindo3704 21 день назад

Sorry, you did not manage this in 15 minutes by cutting through the floor..... Before cutting or replacing ANYTHING. Do yourself a favor, find the fuel pump ground connector - driver's side behind the front wheel. Remove the 13 mm bolt sand down the surface on the frame and the contacts and reseat. Would have saved myself a few hours of cutting through the floor board. Removing the old rusted fuel pump. Wresting to install replacement, which was NOT the exact fit. Although, AutoZone sells it as such. Returning and getting the correct pump. Installing and troubleshooting why it still would not start. Come to find out, the issue was always a ground issue. Old pump worked fine when I applied power to it on a bench test. Could have saved @ $200 and hours of frustration. Takes all of 5 minutes to clean the ground contact and test..... Do yourself a favor.

@aresramirez1400

pro tip- I did it in 15 mins by cutting through the floor

@greenhead333

Looks nothing like my 03 tahoe

@texasflashcoveinstaller4317

That don’t look like my 2002 Tahoe

@608Ralphy

I have a 05 5.3 tahoe if. Leave it overnight and start it the next day it'll run for a few minutes, then shut off after that it starts then dies immediately.