How to Replace Gameboy Color Cartridge Reader

Подписаться 1,7 тыс.

Просмотров 2,5 тыс.

50% 1

How to Replace Gameboy Color Cartridge Reader- I recently bought a lot of handheld devices from eBay, this video captures the process on how to replace a Gameboy Color cartridge reader that was severly damaged. This system wasn't necessarily too dirty, but it was an interesting one to fix. If you are interested, please feel free to subscribe as I release weekly content.
#Nintendo #Gameboy #Restoration #Repair
0:00 Introduction
0:38 Opening System
1:10 Repairing No Power Issue
2:31 Cartridge Reader Replacement
4:43 Testing
5:06 Outro
Tools Used:
Rust Remover (Affiliate Link): amzn.to/3AKpzwA
Brushes (Affiliate Link): amzn.to/3KOijEj
iFixit Toolkit (Affiliate Link): amzn.to/3KOiuiX
Electronics Air Duster (Affiliate Link): amzn.to/3CVCrCw
Canned Electronics Air Duster (Affiliate Link): amzn.to/3B8TnEq
Multimeter - Cheaper Option (Affiliate Link): amzn.to/3Ri07pd
Multimeter - In Newer Videos (Affiliate Link): amzn.to/3elpnfI
Multimeter Leads (Affiliate Link): amzn.to/3AKq0He
HARDK Hook and Pick Set (Affiliate Link): amzn.to/3KLMsEb
Soldering Equipment:
Soldering Mat - Older Videos (Affiliate Link): amzn.to/3BcMOkk
Soldering Mat - Newer Videos (Affiliate Link): amzn.to/3wTtTbw
99% IPA (Affiliate Link): amzn.to/3CWrqAQ
Hakko FX888D Soldering Station (Affiliate Link): amzn.to/3QfqISt
Hakko Desoldering Tool (Affiliate Link): amzn.to/3AQA6X7
Solder Tip Cleaner (Affiliate Link): amzn.to/3RCBdAr
Fume Extractor (Affiliate Link): amzn.to/3Riu744
Solder Roll (Affiliate Link): amzn.to/3TJb0C7
Flux (Affiliate Link): amzn.to/3emEiWU
Hot Air Station Equipment:
Quick 861DW 1000W Digital Rework Station with LCD Display: amzn.to/3DYRnP8
AFFILIATE DISCLOSURE:
This video and description contains affiliate links. If you click on one of the product links, I’ll receive a small commission. I won't put anything here that I haven't verified and/or personally used myself.
Warning:
This channel is not liability for anyone attempting to perform self-repairs. This channel is meant for the purpose of guiding and assisting those that may be experiencing technical difficulties with their systems. All equipment and products are handled with safety first in mind. Anyone who is inexperienced handling certain equipment or chemicals should refer to the user manual for their respective product and ensure that all proper safety measurements are performed.

Игры

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@kiledonley2753 2 года назад

Hey, this was great. I don’t know anything about soldering. Can you explain what you were doing with both removing and then soldering back on the cartridge? Or tell me the correct soldering terminology to help me look it up? The way you removed the first one, if it wasn’t already broken, would it have ruined the reader? My up and left directional buttons aren’t working. I think I tracked down my power break to be on the back of the board under the cartridge slot. Wondering if it’s worth trying to remove the slot to fix it. But watching this I think it’s not a great first soldering project.

@totalfix877 2 года назад

Sure let me see if I can help. *Can you explain what you were doing with both removing and then soldering back on the cartridge?* First I was using a desoldering tool to remove the existing solder from the joints, this was to remove the cartridge reader from the motherboard. The desoldering tool I used is a HAKKO FR301, they're quite pricey. You can use a solder sucker, but it takes a bit of time. When I was putting on the new card reader, I first align it then apply flux and then solder the joints back on. Flux helps with the flow of the soldering metal during liquid form. When creating soldering joints, you just have to be sure not bridge any joints together as this may cause a short. There are plenty of videos on RU-vid that can help the basics for Soldering and how to use flux properly to get nice clean joints. *The way you removed the first one, if it wasn’t already broken, would it have ruined the reader?* No, this wouldn't damage the reader unless I accidentally damage the integrity of the card reader itself or the pads of the motherboard that were soldered from the reader. Simply removing the cartridge by desoldering it wont damage it. *My up and left directional buttons aren’t working. I think I tracked down my power break to be on the back of the board under the cartridge slot. Wondering if it’s worth trying to remove the slot to fix it. But watching this I think it’s not a great first soldering project.* I would first clean out the contacts of the up and down directional pad. While you're there, I would also look at the bottom of the rubber membranes of the directional pad to see if they have build-up or just see if they're in good condition. Just give that a nice gentle clean and then try. If that is not working, then it can be a bit trickier to troubleshoot. At that point I start looking through the schematics to identify if things are connected and working properly. Schematics for GBC: console5.com/techwiki/images/e/e6/Nintendo_GBC_Schematic.png Hope this helps and thanks for dropping by!

@kiledonley2753 2 года назад

@@totalfix877 Thank you so much! This is very helpful. I have tried cleaning them and have also tried using different pads that I know work.

@swide2750 2 года назад

@@kiledonley2753 you can look up some modding videos and join their discords ie MachoNacho on youtube

@dd-bolt 4 месяца назад

Whew, I think this is something I’ll be doing to fix one of my gameboys. Has a bent pin, and it doesn’t seem a practical place to fix, so I’ll be borrowing a 32-pin connector from another dead GBC and hoping for the best.

@eugeneandruszczenko Год назад

Interested to know where you got the replacement slot? I can only find DMG and GBA ones. Need one for the color as well

@totalfix877 Год назад

I normally get them off spare boards, I havent seen these sold separately, but to be fair, I don't always receive systems in that condition either 😅

@berm11 2 года назад

Jaja como diablos pudieron quebrar eso así, que gente. Buena reparación te felicito!

@totalfix877 2 года назад

Muchisimas gracias! Tal vez no pudieron pasar los niveles 😂

@SuperMustang331 2 года назад

What Solution did you put on before soldering? Thank you

@totalfix877 2 года назад

The solution I used is called flux

@albertocarranco359 Год назад

Crees que uno de gameboy clasico le quede? Implicado el que quizas haya que mochar plástico? En ali solo veo de gb clasico y otros que son de otra forma

@totalfix877 Год назад

No estoy seguro de si un cartucho de gameboy original sería compatible con un gameboy de color.

@biggo9048 2 года назад

Hey what did you use to desolder the reader, I have a regular gba system with a broken pin in the cartridge and I need to replace the whole thing.

@totalfix877 2 года назад

I used a Hakko desoldering gun. You can get away with using simply a desoldering wick, flux and a soldering iron. However this will be a bit time consuming but it is possible

@biggo9048 2 года назад

@@totalfix877 oh alright I’ll try that

@noahnetwal5865 Год назад

Where can I buy a replacement cartridge reader? I don't have any donor boards

@totalfix877 Год назад

I've had a difficult time tracking these down, I know I came across them on Aliexpress, but I never purchased them myself so I don't want to push a product on you that I am unfamiliar with. In the past, I normally just get them from donor boards.

@ricardogutierrez3021 Год назад

Has anyone found a site where I can find a replacement reader? No luck for me

@totalfix877 Год назад

I haven't unfortunately, normally I get the cartridges from spare GBC's 😢

@hubergalvez4162 2 года назад

Donde compraste el repuesto? No veo el link del repuesto

@totalfix877 2 года назад

Era de un sistema extra que no funcionaba. No tengo un link para un repuesto 😧

@dragonatun Год назад

en ali expres

@ZanderZr Год назад

where did you get the spare cartridge?

@totalfix877 Год назад

I had an extra broken GBC, I removed it from that one and put it into the one in the video. I can try and see if I can find a link to it sold on its own.