How To Replace Headlight Switch 1984-2001 Jeep Cherokee

Подписаться 532 тыс.

Просмотров 37 тыс.

50% 1

Buy Now!
New Headlight Switch from 1AAuto.com 1aau.to/ia/1AZH...
Switches and dials that control the headlights and accessory lights might be one of the most used controls in your vehicle, which means they may wear out or get broken. Fortunately, you can replace them yourself! This video shows you how to install a new headlight switch assembly in your 1983-2001 Jeep Cherokee.
• Check here for more videos on the 1983-2001 Jeep Cherokee XJ • Jeep Cherokee 2nd Gene...
This process should be similar on the following vehicles:
1984 Jeep Cherokee
1985 Jeep Cherokee
1986 Jeep Cherokee
1987 Jeep Cherokee
1988 Jeep Cherokee
1989 Jeep Cherokee
1990 Jeep Cherokee
1991 Jeep Cherokee
1992 Jeep Cherokee
1993 Jeep Cherokee
1994 Jeep Cherokee
1995 Jeep Cherokee
1996 Jeep Cherokee
1997 Jeep Cherokee
1998 Jeep Cherokee
1999 Jeep Cherokee
2000 Jeep Cherokee
2001 Jeep Cherokee
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oD5/1AX...
• Phillips Head Screwdriver 1aau.to/oD5/1AX...
Subscribe: / @trq
Check out our playlist:
Jeep Cherokee 2nd Generation 1984-2001: • Jeep Cherokee 2nd Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@RipRoaringGarage Год назад

This doest apply to 84-96 XJs

@theadventuresofblackbonnie3672 2 года назад

This video saved me sooooooooooooooooooooooooooooo much time and frustration. Great Video

@ncognitod.460 3 года назад

Thank you for an excellent tutorial! I changed my headlight switch at an off-road event in the dark using your video & only a headlamp on my head as illumination. The part where I had to pause the vid to see exactly how you oriented the new switch for installation ... was key! If it weren't for this video I would have thought it was a huge job that I'm incapable of. Just 1 question: Why did you remove the upper dash trim? I found that it wasn't necessary & wouldn't have made the job any easier.

@gamingwithmyfamily5928 Год назад

You r awesome . My plug in is melted so I hope you have that video too.

@idalbertoross298 2 года назад

Me encanta la forma en q ustedes hacen las reparaciones y cambian las piezas aunque no se ingles los veo y los sigo , gracias por el tutorial

@erichimes3062 Год назад

After replacing my third headlight switch, I ended up getting a headlight relay kit from Daniel Stern. You supply your own wire & loom. Takes the burden off the switch on aging headlight circuits

@freebuilder007 Год назад

UPDATE !!! I just finished replacing the light switch on my '96 Cherokee. I have replaced similar switches on different trucks. The switch on my jeep COULD NOT BE REPLACED FROM BELOW THE DASH. I pulled lower dash and began the process as I have done before. With the retainer nut removed there was maybe an inch of slack wiring harness allowing the switch barely an inch of movement. No way to disconnect and remove the old switch, and definitely no way to install the new switch. I started pulling down the far left idiot light panel, discovered that is riveted into place. Then went after the instrument panel. pulled instrument panel bezel, and instrument panel which also required removing trim from the steering column around ignition switch/hazard light panel. (you will need a t-20 driver, and not a t20 bit on an extension) It was barely possible to replace the switch going in through the instrument panel location. New switch had 2 grounds, old switch and harness had one. Had to fabricate wiring, you will need 2 spade female terminals and wire. Doable, but major P.I.A. Hopefully yours goes easier, like the one in this video. Good Luck...

@rc9266 Год назад

Nice Job!! I fought with this a few years back Now I have the dreaded XJ Head light flicker UGH!!! I luv my XJ so I will fight with it she is worth it!! no problems for 2 years now we are over due Lol!!

@tomawboss7513 Год назад

Well done video. Thank. Just what I needed.

@felixls6191 Год назад

Is this what makes the buzzing noise in my xj and my headlights won’t turn off?

@Go_Play_Outside Год назад

Thank you for this instructional video. On mine, the connection on the Jeep side is melted. Replace & solder? Or is there a different fix? Thanks.

@sponge81235 2 года назад

I would make sure the new switch actually works before putting it back in

@rubinmortensen 3 года назад

wicked pissah walkthrough

@hunterdawgggg 2 года назад

Hi there this video was extremely useful for this task today and I just have one question. After replacing this part with a new one and the high beams are still not working do you think its electrical or bad fuses?

@JackBeeler 3 года назад

Very helpful!!!!

@marcbertone6331 2 года назад

If the light knob is stuck, and will only pull out half way - or not at all, do you need to replace the switch? The knob / rod? Everything?

@cesarchavez7169 2 года назад

Muchas gracias.

@highwayxj9397 27 дней назад

The title should be 97 to 01, not 84 to 01

@blackfootjbd 7 месяцев назад

The part you showing in video and the part you actually get are NOT Identical. The one you sell with the link does NOT have a ground as shown in your video.... so what to do with the Ground wire......

@faisalsjeepventures 2 года назад

She sound like the judge from Johnny depp trial :)

@josephcarter1075 Год назад

What can I do if the plunger doesn’t come out even though I am pushing the button

@lh1678 Год назад

This doesn't look like what I'm working on now

@RipRoaringGarage Год назад

Its not. The video is kind of mislabeled. Its after the 97 redesign with the new interior. Im still working on chipping away parts of the dash to get my switch out. Its quickly becoming one of the my top 3 WORST things do replace on any car. Its way worse than a 60 Continental starter motor.

@jeffblack6295 11 месяцев назад

Overall good video, however you removed the center entertainment cover and the dashboard cover without showing us how. You do show how to put them back after the work is finished, but to be complete from start to finish, I'd suggest you show all the stages or provide links other videos if you don't want to record this step for multiple repair videos.

@SeanChristian-c5x 4 месяца назад

That’s not an 84-2001 Cherokee.

@jenos8036 Год назад

Not for 89 or older 💩

@daytonjensen9340 23 дня назад

Shame on you, fix the title

@ferdjanklow3566 2 года назад

That's a GRAND Cherokee, not a Cherokee. NFG to me.

@andrewsalinis3017 2 года назад

No thats a cherokee xj

@xmo552 Год назад

@@andrewsalinis3017 No good for my 1988

@pedrocoloncruz1843 3 года назад

Is she mechanic?

@rubinmortensen 3 года назад

to say the least

@ncognitod.460 3 года назад

How is that relevant? At the very least she's done this before & that's what is important. I'm also a "she" & I'll be doing this repair in about an hour or so - following this video.

@AskTrannyMan 2 года назад

@@ncognitod.460 No, the HeMan here hasn't done this too often before... I have been a mechanic for 40 years,...and you DO NOT have to disassemble 2/3s of the dash panels to replace that dern switch... The outer "cap" on the end of the dash is removed by two screws, and the rest just pries out the slightest... This switch takes all of 12 minutes to change...Period. But Hey, everyone has to learn somewhere.