Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASF...
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. This video shows you how to install a new quality TRQ passenger side lower control arm in your 2007-14 Ford Edge.
• Check here for more videos on the 2007-14 Ford Edge: • Ford Edge 2007-2014 1s...
This process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 13mm Wrench 1aau.to/oa/1AXA...
• 18mm Wrench
• 13mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 18mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• Straight Cutters
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Air Chisel 1aau.to/oa/1AXA...
• Swivel
• Torque Wrench 1aau.to/oa/1AXA...
• Cotter Pin
• Liquid Thread Locker
• Rust Penetrant
• Hammer 1aau.to/oa/1AXA...
• Rubber Mallet 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Ford Edge 2007-2014 1st Gen: • Ford Edge 2007-2014 1s...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
16 сен 2024
