How to Replace Power Steering Pressure Line Hose Assembly 2003-2007 Honda Accord

Подписаться 462 тыс.

Просмотров 30 тыс.

50% 1

Buy Now!
New Power Steering Pressure Line Hose Assembly from 1AAuto.com 1aau.to/ib/1ASPP00244
This video shows you how to install a new power steering pressure line hose assembly from TRQ on your 2003-2007 Honda Accord.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• 17mm Wrench 1aau.to/o2N/1AXAA00010
• 19mm Wrench 1aau.to/o2N/1AXAA00010
• 10mm Socket 1aau.to/obmt/1AXAA00017
• Torque Wrench 1aau.to/oaPF/1AXAA00044
• Gloves 1aau.to/oaq8/1AXSS00048
• Paper Towels 1aau.to/oFH/1AXSS00035
• Power Steering Fluid
• Safety Glasses
• Bucket
• Wire Brush 1aau.to/ouB/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

23 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@TRQ 8 месяцев назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@mapquestHs Месяц назад

Thank you for the informative video! One thing I would do different is to hand thread all the bolts and hose ends finger tight then go back and snug it all up at the end. This is a good way to make sure nothing is under stress.

@saginaw60 7 месяцев назад

Why not put the pressure switch onto the hose before?

@hussein-vlog-6985 8 месяцев назад

Nice video well explained 👏👏👏👏

@jonmedina9160 4 дня назад

At 5:03 how did you get enough leverage to get that tool in there, I hardly have any space. Seems like that nut on mine is seized. No tool will do it. Tried some busters and that didn’t do it either. Now I’m stuck with a seized nut and a leaky hose 😢

@helicopterjohns 2 месяца назад

Thanks for a very informative video.

@elkinposada6261 4 месяца назад

So are you just laying on top of the engine the whole time ?

@YouzaFugazi Месяц назад

Thanks for the video! 👌

@mikebazil1 5 месяцев назад

great video, thanks

@christopherbrown5338 5 месяцев назад

I need to test my steering pumps pressure. What is an acceptable psi range?

@dmcresins 23 дня назад

Nice one mate 👍

@innovative5428 4 месяца назад

Excellent

@sabinmaharjan8058 7 месяцев назад

Where can I find the part number I am going to repair it by myself but Parts shop asked me to have part number ? My car is Honda Accor 2007 2.4l i-vtec

@Sticky93 7 месяцев назад

Thank you mine just started leaking.

@starrsrus 5 месяцев назад

Wow thanks

@victorcisneros8167 3 месяца назад

So im about to do this, since the rubber over the engine area has the skin texture of a 90 year old. 304k miles, and on the search for my mysterious power steering leak🙂👍

@SashaNem 2 месяца назад

thanks

@venom17a 2 месяца назад

Made it look easy, mine won't line up to rack

@1kelvis_ 2 месяца назад

at 1:35 what sensor is that?

@r.jr.0cxsa15 6 месяцев назад

Part number

@markadams9555 2 месяца назад

This video seems like it is geared towards a shop, i don't know anyone with the vacuum tool they used to drain the fluid, and that will only drain the tank, not the system. Make sure you find a different video to help you drain the system of fluid before removing the hose.