How to Replace Radiator 1996-2002 Toyota 4Runner

Подписаться 481 тыс.

Просмотров 14 тыс.

50% 1

Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARAD00648
This video shows you how to install a new TRQ radiator in your 1996-2002 Toyota 4Runner. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Pry Bar 1aau.to/oSV/1AXAA00020
• 12mm Wrench 1aau.to/oU3/1AXAA00010
• 10mm Socket 1aau.to/oa8C/1AXAA00017
• 8mm Socket 1aau.to/oa8C/1AXAA00017
• Ratchet 1aau.to/obzm/1AXAA00016
• Socket Extensions 1aau.to/obsm/1AXAA00015
• Gloves 1aau.to/o3f/1AXSS00048
• Safety Glasses 1aau.to/oUp/1AXAA00343
• Drain Pan 1aau.to/oyV/1AXAA00320
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

20 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 10

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@paulbathen2724 3 месяца назад

This video helped thru the process. A few things: (1) For me it was MUCH easier to remove the skid plate to work from underneath (2) If your transmission cooler lines are hooked up to the radiator then when you disconnect you WILL be training transmission fluid! Clamp off the two hoses prior to removing them!

@Jtitor177 11 месяцев назад

Much better than paying $1500 at a shop. Thanks!

@YMagoulo Год назад

Thanks for doing this video. I used it to replace my radiator yesterday on my 2001 4Runner.

@mildseven0506 Год назад

a decent vid w/ good detail, I was able to do it w/o removing the fan and shroud altogether, and still I removed the engine shield underneath that made working on the bottom (hoses, hardware)alot easier. Not going against the vid pls but it's good to share advice, good luck guys.

@calebk3213 6 месяцев назад

great lighting and camera angles! very helpful vid

@dominicromano7235 2 месяца назад

No need to remove the fan!!! The bottom piece of the fan shroud can be removed.

@cmintsurfer Месяц назад

I'm glad I watched until the end. I thought it could be blocked water flow in the radiator when it could just be an air pocket. Where's my flow chart? Why didn't I check the obvious first?

@MichaelLoves2024 6 месяцев назад

I have a coolant leaking from my trans oil pan. I believe its from a faulty radiator. If i replace the radiator will that correct the problem or will i also need to change the transmission fluid after the radiator is replaced?