How to Replace Radius Arm & Bushing 1993-1997 Ford Ranger

Подписаться 481 тыс.

Просмотров 50 тыс.

50% 1

Buy Now!
New Radius Arm from 1AAuto.com 1aau.to/ia/1ASLF00729
New Radius Arm Bushing Kit from 1AAuto.com 1aau.to/ia/1ASMX00469
This video shows you how to replace the Radius Arm & Bushing on your 1993-1997 Ford Ranger.
This process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 18mm Wrench
• 18mm Socket 1aau.to/oa/1AXAA00043
• 19mm Socket 1aau.to/oa/1AXAA00043
• Air Compressor
• Blowtorch
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Air Chisel 1aau.to/oa/1AXAA00270
• 1-1/8 Inch Socket
• Torque Wrench 1aau.to/oa/1AXAA00044
• 1-1/8 Inch Wrench
• Drill
• Anti-Seize Grease
• Gloves 1aau.to/oa/1AXSS00048
• Rust Penetrant
• Center Punch 1aau.to/oa/1AXAA00055
• Floor Jack 1aau.to/oa/1AXAA00068
Subscribe: / @trq
Check out our playlist:
Ford Ranger 2nd Generation 1993-1997: • Ford Ranger 2nd Genera...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

15 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@Hobosdkcheese 7 месяцев назад

This is one of the only videos I can find that actually details how to remove the radius arm thank you for that

@jwerner3903 Год назад

Great video of a truck with rust as would be commonly found on vehicles in at least half the US. So much more helpful than repair videos of vehicles with not a speck of rust on them anywhere. Kudos to TRQ for showing a repair video of how to overcome problems with rust and corrosion that are often encountered.

@IrenMasot 5 месяцев назад

My radius arm just cracked in half from rust; thanks for having this excellent guide up!

@kipblack7196 Месяц назад

Very informative. Mine finally snapped (rotted away) while I was pulling an enclosed trailer. A little scary ! Thanks for the great vid.

@TRQ Месяц назад

+@kipblack7196 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@joshstaley7459 Месяц назад

No on sales a radius arm for a 97 2wd f350. Which is amazing considering how many flatbeds, dump trucks and cab and chassis you still on the road. I had to take a Welder and fill in all the metal behind the threads on shank of my radius arms. i machine it myself with the old angle grinder. i had to do this before being able to install new bushings

@majordog85 11 месяцев назад

Thank you for the great explanation and your time. Youve got a new subscriber 🙏

@danielleroberts8964 Год назад

Great video, very helpful! Thank you.

@michaelcandela1107 10 месяцев назад

I have to replace the whole arm. Because the right side had nothing left of it. So this video helps me get a 1994 Ford F150 5.0 V8 back on the road.

@gradytimmons6961 Год назад

Awesome job

@fh8769 Год назад

Master mechanic. Great video.

@TRQ Год назад

+f h Thanks for watching our video! 1aau.to/m/Shop-TRQ

@siccicey9479 Год назад

is it the same on 4wd, i have a 1990 and the radius arm bushings are completely blown

@LostInPhilly89 Год назад

Do you have any videos on how to replace the front radius arm bushings on a RWD 99-03 Ford Super Duty? It is a single bushing that sits in the end of the radius arm with a bolt that passes through where it mounts to the chassis. The only guides I can find are for the style you show in this video.

@thesilversphincter Год назад

Will a manual trans from a 95 XLT 4x4 4.0 bolt onto a 2000 3.0 motor?

@Martinbnee Год назад

Would it fit a 1993 4x4?

@R_D_EYE_R8 8 месяцев назад

Wouldn’t it be easier to cut and drive out the rivets on the brackets and pull them off towards the rear of the truck? I mean, if you’re replacing the radius arm, this would be the way to do it.

@MrsBuddevil 4 месяца назад

Pn for the lower shock mount?

@walteromarcasasrodriguez4140 8 месяцев назад

Ya estabas ahí por qué no limpiar , me pone ansioso ver la mugre y no limpiar

@densmith1234 Год назад

This is a wonderful instructional video by a great mechanic and it helped me out a ton. My only critique is that in the narration the phrase "go ahead" was used so often that it was very distracting to the otherwise clear and concise instructions. Thank you sir!!!