How to Replace Rear Brakes 06-14 Toyota RAV 4

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 109 тыс.

50% 1

Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1ABF...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to the 06, 07, 08, 09, 10, 11, 12, 13, 14, Toyota Rav4.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oJj/1AX...
• 14mm Wrench 1aau.to/ogU/1AX...
• 14mm Socket 1aau.to/oCK/1AX...
• 17mm Socket 1aau.to/oCK/1AX...
• 21mm Socket 1aau.to/oiw/1AX...
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/od/1AXA...
• Brake Caliper Hanger 1aau.to/ot/1AXA...
• 1/2 Inch Breaker Bar 1aau.to/oe5/1AX...
• Ratchet 1aau.to/oJZ/1AX...
• Socket Extensions 1aau.to/oCK/1AX...
• Torque Wrench 1aau.to/okJ/1AX...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/odC/1AX...
• Hammer 1aau.to/oft/1AX...
• Wire Brush 1aau.to/obX/1AX...
For More Info visit us at 1aau.to/h/bSa/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@1AAuto 4 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@spartanray2173 5 месяцев назад

Just changed my brake pads now. Thank you for teaching me how. Saved me 450 dollars from the mechanics

@geovannyaguirre4566 2 года назад

Bolt size: M8 - 1.25

@Kansascityvinyldjsforever 4 года назад

If you incorrectly thought it was the front brakes, then moved to check the rear brakes, make sure to DISENGAGE THE PARKING BRAKE before removing the disc drum combo rotor! Dont ask how I know.

@Bobs-yer-uncle 2 года назад

I just did this 😄

@GRfourfun 2 года назад

Did it too! 😂

@osocrazy181 Год назад

Im.lost so put the e brake on for the back?

@macker0077 Год назад

Minor thing, appears you didn't orient the rotor so the parking brake adjuster was accessible. Would require you to remove the rotor and re-orient if you needed to adjust the parking brake.

@brianpiersol9412 Год назад

What about those 2 springs that go into the pads to help hold the bads away from the rotor? didn't see them in vid...

@Hawk-qn2zk 2 года назад

E brake adjustment? I came to see how to do that.

@iulianstoican1119 3 года назад

Did you forgot to adjust the parking brakes after intalling the new rotor?

@1AAuto 3 года назад

+Iulian Stoican Thanks for the tip! We'll pass this info along to our production team.

@BTL3.0 3 года назад

Is it not necessary to replace the brake shoes?

@racer72 2 года назад

The shoes are for the parking brake. Unless someone has been driving the vehicle a lot with the parking brake on, these should last the life of the vehicle.

@Kilokato24 2 года назад

What about disc brake anti squeal grease?

@betuki 2 года назад

What is the size of the bolt?

@james98005 2 года назад

spent an hour at the parts store today trying every available bolt, and no match

@ovalhead1412 Год назад

M8 - 1.25

@dmeyerspb 4 года назад

I put all new brakes and rotors and calipers on my rav 4 2008 , and my rear brakes are scratching my new rotors .. What did I do wrong .. please help

@1AAuto 4 года назад

+Dave Meyers We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com

@riteskills 3 года назад

if the pads are scratching the rotors one possibility could be they are not flush with it. if you never replaced calipers and brackets on your 2008 car one reason could be rust buildup under the clips that prevents the clips from sitting properly and the pads from moving freely. Make sure to clean it very well with a file, not just a wire brush. after installation the pads need to move freely and smoothly inside the caliper bracket.

@vincenzofaraone 4 года назад

Not in detail for many . Which side are you on ! Which side do you unscrew ? And so on.

@racer72 2 года назад

Noticed a couple things. I have never got the rear rotor off without backing off the parking brake shoes. This will be especially true if the car has been driven with the parking brake on. I also coat the flat of the hub and the hub flange with a thin coat of high temp grease such as wheel bearing grease. Whoever takes the rotor off the next time will sure appreciate it.

@TheGoofy123456 2 года назад

Don’t ever spray brake cleaner down the guide pin boot; it’ll swell the rubber boot making water and debris entering and corrosion will occur and premature brake pad wear.

@riteskills 3 года назад

did this yesterday... they do mention the rust build-up under the clips, but greatly underestimate it. There was so much rust build-up where the clips sit that it took me half hour of heavy filing to clean it up. You can't do it with just a wire brush. The old rear pads were in pristine condition simply because they got stuck in the caliper bracket pushed by the rust. So much for my mechanic's work.. when you want something done - diy great vid, thanks!

@1AAuto 3 года назад

+Zaur Gozalov Thanks for the tip!

@jonsmith6496 Год назад

Just find a random bolt…. Easy for you to say! 🙄

@donaldedwards329 3 года назад

Great video. But did you forget to put on the little clips that squeal when the pad is worn?

@1AAuto 3 года назад

+Donald Edwards Thanks for the feedback!

@johnwills3447 3 года назад

You don’t need the brake pad indicator clips, they are a suggested thing, if you do general maintenance on your car then just check brake fluid level. When it gets low your breaks are typically getting close to due, or you have a leak. Both should be checked

@MikeD-dp4vk 4 года назад

What size is that damn bolt to loose. The rotor???

@loulinjai 4 года назад

Mike D I am looking for the bolt size too

@christopherbarnes8850 4 года назад

14mm and 17mm

@GibsonGuitarPlayer27 3 года назад

Two M8 - 1.25 bolts should be used to loosen the rotor from the hub if it is stuck.

@terrywangen9657 2 года назад

@@GibsonGuitarPlayer27 Yes

@gustavette8487 2 года назад

Great video. Question: what is that small rubber cap on the rotor? I believe there is an adjustment under that cap, but have not seen anyone actually using this?

@55elv 8 месяцев назад

I didn't see where the wear indicator was installed. where does it go?

@jimbernard8964 Год назад

Thanks!

@singdo6611 2 месяца назад

missing the brake fluid bleeding part during the brake replacement wonder if it is necessary?

@robertehlers4330 2 года назад

I don't know if I told you but thanks broski 🙏 ypu teaching me so much

@jimbernard8964 Год назад

Excellent. Thanks. Doing this this weekend.

@einstein3509 Год назад

Now that was a very thorough and informative video. Thanks

@russellwebster2048 6 месяцев назад

Why no brake wear indicators?

@robertscardino6575 Год назад

You forgot the emergency brake !!

@WalrusWillpower 2 года назад

Andy you have saved me so much money thank you

@edzanjero353 11 месяцев назад

A-1 is the best. Thank you!!!

@wolfganghokenmaier Год назад

Just what I needed to know. Thank you.

@kevinsweeney176 2 года назад

Awesome 😎 thanks mate 😊🚗👍

@richiesyt3492 4 года назад

OK thanks this may sound nuts but in another video when doing fronts they said to take the cap off the brake fluid container as this will avoid any air or pressure in the brake line....thank Vin I will advise.

@1AAuto 4 года назад

+Richie Morgan Taking the cap off of the master cylinder reservoir will allow the calipers to be compressed easier. 1aauto.com

@nvkulk 4 года назад

Thanks

@PackerManForLife 3 года назад

Is everything the same for a 2011 Toyota Rav4?

@1AAuto 3 года назад

+PackerManForLife The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c