Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2003-2008 Toyota Corolla. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 14mm Socket 1aau.to/obiV/1A...
• 21mm Socket 1aau.to/oaaJ/1A...
• Acetylene torch
• 1/2 Inch Impact Gun 1aau.to/oqv/1AX...
• Air Chisel 1aau.to/obk/1AX...
• Socket Extensions 1aau.to/obiV/1A...
• Torque Wrench 1aau.to/oawU/1A...
• Anti-Seize Grease
• Brake Parts Cleaner
• M8x1.25
• Hammer 1aau.to/oQZ/1AX...
• Large Hammer 1aau.to/oQZ/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
21 авг 2024