How to Replace Rear Wheel Bearing & Hub Assembly 2009-2015 Honda Pilot

Подписаться 542 тыс.

Просмотров 19 тыс.

50% 1

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2009-2015 Honda Pilot. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2009 Honda Pilot
2010 Honda Pilot
2011 Honda Pilot
2012 Honda Pilot
2013 Honda Pilot
2014 Honda Pilot
2015 Honda Pilot
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oaY2/1A...
• 17mm Wrench 1aau.to/oKk/1AX...
• 17mm Socket 1aau.to/oaZw/1A...
• 22mm Socket 1aau.to/okv/1AX...
• 36mm Socket 1aau.to/obo/1AA...
• Ratchet 1aau.to/obdw/1A...
• Socket Extensions 1aau.to/oaZw/1A...
• Torque Wrench 1aau.to/oajx/1A...
• Anti-Seize Grease
• Cloth Rags 1aau.to/ows/1AX...
• Paper Towels 1aau.to/ows/1AX...
• Center Punch 1aau.to/ojL/1AX...
• Floor Jack 1aau.to/oNY/1AX...
• Hammer 1aau.to/oKw/1AX...
• Jack Stands 1aau.to/oKI/1AX...
Subscribe: / @trq
Check out our playlist:
Honda Pilot 2nd Generation 2009-2015: • Honda Pilot 2nd Genera...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@rstoertz 14 дней назад

Thanks! Removing the axle bearing can be a beast of a task. I have broken three 1/2 inch drive ratchet wrenches doing that on my two cars. I finally got a high strength breaker bar, 3/4 drive, that can withstand the torque of a three foot pipe on it. Now the job is easy ... sort of. Pop the center emblem out of the wheel and then put the wheel back on. Remove the axle nut with the wheel solidly on the ground, with the 36 mm socket going through where the emblem was. If your 36 mm socket is too big for the hole, you need to use a bar between two lugs, braced on the ground. I think that's how it is done in the video.

@MR-of9dx 4 дня назад

You guys have the best videos.....!!!!

@epicjamaicanjokes8279 Год назад

Clearest videos on how car repairs. All the important factors are mentioned every step outlined and properly executed

@TRQ Год назад

+Epic Jamaican Jokes Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@ramshackleshack751 Год назад

Just did this today on my 2014 pilot. This video helped immensely

@mooreadventures Год назад

Had to replace it on my 2014 Honda Pilot this past weekend... Ahhhh The sound of silence 😁 Thank you.

@cliffordgallagher4531 Год назад

Appreciate the help with the video bud!

@mthomas3845 Год назад

Nicely done instructional video..thank you!

@iptvmonument1906 8 месяцев назад

I have a 2010 pilot and it shakes after 30 MPH. I have replaced all 4 tires mounted and balanced, tie rods, links, Front and rear suspension. What odds that it would be the wheel bearings? I do hear a little humming but the shakes are more notify than the humming. BTW very nice video thank you