No video :(

How to Replace Spark Plugs and Wires On a 2014 - 2019 Sierra, Silverado, Yukon, Tahoe, Escalade GMC

Подписаться 74 тыс.

Просмотров 86 тыс.

50% 1

(8) ACDelco 41114 Spark Plugs on Amazon - amzn.to/2M28SHG
ACDelco 758EE GM Original Equipment Spark Plug Wire Set - amzn.to/3cnINO1
Double Offset Spark Plug Boot Removal Pliers on Amazon - amzn.to/3ciTOQC
Anti-Seize Lubricant on Amazon - amzn.to/3otqngR
Dielectric Grease on Amazon - amzn.to/39qhFMq
3/8" Drive 6 Pt. 5/8" x 6" Magnetic Swivel Spark Plug Socket on Amazon - amzn.to/2NL92DP
Tekton 3/8 Torque Wrench on Amazon - amzn.to/3t1RK5b
Spark Gap Tool on Amazon - amzn.to/3ppcKRt
3/8" Extension on Amazon - amzn.to/3abR30C
5/8" Spark Plug Socket on Amazon - amzn.to/2MazplZ
This video tutorial walks provides steps that outline how to change the spark plugs and spark plug wires on a 2014 GMC Sierra, Chevy Silverado, Tahoe, Yukon and many other vehicles. Some other spark plug replacement video tutorials outline the removal of the inside fender well to provide access to the spark plugs on these GMC trucks. This spark plug replacement tutorial demonstrates that the spark plugs can be removed and re-installed on a Silverado or Sierra without removing the wheel wells.
Click here to subscribe bit.ly/ngdysub1 and don't forget to select the notification bell!
Mark Jenkins is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
Disclaimer:
Due to factors beyond the control of Mark Jenkins, I cannot guarantee against improper use or unauthorized modifications of this information. Mark Jenkins assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Mark Jenkins recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Mark Jenkins, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Mark Jenkins.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@nogripes 2 года назад

@Mobev1 2 года назад

This guy is fantastic and was right about everything that was done. I’m a E designer for GMC and a MIT engineer. There is not a single thing he did wrong including the anti seizing.

@Kyle_Lowrey Год назад

I should definitely apply anti seize to the plugs? Will do, others where saying it's not necessary but I've seen an engine that's 2007ish that uses newer style plugs that has issues of the plugs seizing and breaking off.

@slalomking 2 месяца назад

How do we know you have these credentials. Anyone on RU-vid can claim anything. Anti seize not required or needed.

@themadmattb Год назад

My great great grandfather Etienne invented the spark plug and I am currently leading a top secret spark plug development ops team and everything in this video is done perfectly, this is the best spark plug tutorial on RU-vid, my GGG would agree 100%.

@user-cr2yz6kj9z Год назад

Thank you for the video, it really helped me when installing my plugs and wires. The down side is all the crap in the way making it painful and difficult to reach the plugs. I am 68 years old and very healthy but I cut and bruised my arms , the passenger side was the worse. I will never do this again , I will gladly pay someone to do the job. I wanted to send pics of my arms, cuts and bruised from elbow to fingers.

@wreckim Год назад

I don't know crap about mechanics, but this video really surprised me. My buddy just replaced my brakes, pads and rotors on my 2014 Sierra. I would have thought THAT to be a much tougher job. Nope. That was actually fun to do. This spark plug crap is crazy contortions, angles etc...I'm taking my truck to the Dealer's for this. Thanks for posting! Awesome vid.

@TheLouisianan Год назад

I had the same thought. I'm about to do my brakes soon and looked at doing my own tune up, but unless you're small or really good at getting into odd angles down there this kinda work sucks and I have no patience. Brake jobs are nice with a small stool on a nice day though.

@joedropulich3664 Год назад

"The one back there" IS tight, it's a real mutha.

@Chevy770 16 дней назад

Nice video matter of fact im doin the spark plugs myself this coming weekend on my 2014 Silverado

@greyhairedmountainbiker116 Год назад

Great video. Been working on cars for 30+ but sometimes it's good to get encouragement and reminders; especially with those crazy gm connectors. Suburban/Tahoe with rear heat has hard lines right in the way of that last plug that's already impossible. I'm going to remove the fender well.

@Kyle_Lowrey Год назад

You posted this today, so mabey you can help with a few questions, I just started coils,plugs, wires, didn't have the proper plug socket. I didn't know you could switch the heat shield out on the wires so I didn't not do so. I still have to finish by changing the plugs tomorrow when I get the proper socket. Should I put a drop of dielectric grease on the plug wire hat that connects to each plug? I'll have to put the heat shield's on the new wires as well. In the meantime will I be fine running 2ish miles to pickup a plug socket? Thank you

@slalomking 2 месяца назад

@@Kyle_Lowreyyes, dialectic grease is a great idea

@joholi Год назад

Couldn't get last plug on passenger side. Ended up removing Wheel well, Which actually wasn't too bad.

@Loudpedal10 3 года назад

You don’t use anti seize on those plugs. The silver coating on the threads is to prevent galling. Anti seize is for old design plugs with uncoated threads.

@pjbuckmaster 2 года назад

This is facts. So many people now days putting anti seize on these and u don’t need to and they don’t come from the factory like that either.

@Kyle_Lowrey Год назад

There is an engine that is famous for the plugs getting stuck. If I remember correctly I believe it's a ford or dodge engine used in SUVs. Don't quote me on that. If you know please leave a comment.

@johnaugustmoore Год назад

@@Kyle_Lowrey ford v8

@ritotron5752 Год назад

@@Kyle_Lowrey having removed and replaced spark plugs in GM and Dodge Trucks and SUVs for over a decade I can objectively say I have not had an issue with that at all.

@Kyle_Lowrey Год назад

@Rito Tron it's an early model aluminum block suburu engine. Don't know where my memory was on that day. Reading that comment now is quite baffling. Lol...

@sambiscits6711 Год назад

That's a good tip with the fuel line, and I was trained as a mechanic. I completed about 80% of a mechanic scholarship and got married. What can I say so? I went back to the job I had. I got a new GMC 2022. It'll probably be a while before I change my plugs.

@tylerhk6305 3 года назад

Very helpful, got it done today without taking the tire off! Had to remove the exhaust heat shield on both sides to better manipulate the wrenches, but it was an easy 3 bolts on each side.

@danblekeberg2470 2 года назад

A lot easier to remove the fender well. A few screws, then everything is open.

@n222ny 2 года назад

Thanks for this video. Got mine done today. Glad I didn't have to take the wheel off... Plug 8 was tough but I got it with a universal joint and smaller socket. Thanks again!

@blakebrass125 2 года назад

Good job bud. Made it look easy. I usually swear lol. I'll be taking off the fender well liner off on the passenger side though. Good tutorial 👌 No anti seize?

@slalomking 2 месяца назад

Anti seize not needed, not required.

@chad7768 3 месяца назад

everything is 100% accesible under hood on Psngr side, its tight but lil paitence n time its doable JUST Watch out for heater hose / heater core "plastic" connections they will snap if you Breath to hard on them.. If so not a biggie on the pick up Trucks , cut plastic tip end of hose and re attach with smater / better clamps... Escalades/ Yukons, etc on the other hand you have to deal with T connection for Rear coolant lines and plastic heater core connectors... Id love to back hand and drug test the GM Engineer who said it would be smarter / best to incorperate plastic into vital coolant connections

@cityhomestead40 2 года назад

Thank You GMC Brother!!! 40 thousandths??? Got It!!! But NEW Subscriber and FULL View...Have a great day😁🙂🙃😉

@jimmynickels6248 8 дней назад

Super helpful sir! Thanks

@josevaldez9542 2 года назад

Thank you for this sir!! Will be adding some performance wires to my Sierra after installing headers hehe

@nnn958 8 месяцев назад

I change my spark plugs and wires in the truck started misfiring and transmission stopped responding I double checked spark plugs and wires and everything it’s OK do you think is the fuel injectors?

@user-xu8fh5zc7k 9 месяцев назад

Are the heads on a 2014 GM aluminum or cast? I have 126000 on mine and don't want them to snap off with cast iron heads. Aluminum heads are much easier as they don't seize in the heads.

@justinclark3649 8 месяцев назад

Shop said not covered under warranty they wanted $750😂

@tpaege1 3 года назад

Not with my gmc Sierra 07...no slot.. No access to the ook top and bottom hlove boxes out even exposed the ac unit... No access

@scrimshank1 Год назад

Why is GM selling ACDelco 41-168 plugs now in stead of 41-114?

@benca6151 3 года назад

I'd prolly stuff a clean rag in the oil fill hole too but looks good other than that

@njgrplr2007 2 года назад

How necessary is it to remove the spark plug wires?

@yasminalvarez5155 3 года назад

Great videos man very helpful

@DavidPerez-or6te 2 года назад

Very helpful Sir..Rock on!

@user-xu8fh5zc7k 9 месяцев назад

PS-Liked the video very much

@joshs6316 2 года назад

Great video and very informative

@brucegrasty7314 3 месяца назад

You don't filll gauge them plugs they done set

@SierraOne 3 года назад

Nicely done!

@treeroofgrass 3 года назад

Cool! New sub here!

@brianw612 2 года назад

I will let the stealer do this one, harder on my wallet, but much better for my back, and I sure don't want to risk breaking one in the block. I don't have all those nice tools anyhow.