How to Replace Spark Plugs on a 2002 Lexus ES300

Подписаться 214 тыс.

Просмотров 109 тыс.

50% 1

Brian Eslick from How to Automotive www.howtoautomotive.com/ takes you step-by-step through the process of replacing spark plugs on a 2002 Lexus ES300. Estimated repair 1.5 hours. If you were to do this yourself it could save you about $150. Overall the job is not that hard. All done with hand tools. #HowtoAutomotive #AutomotiveRepair
Affiliate link mentioned in the video for 6 New DENSO Iridium Spark Plugs IK20 # 5304 amzn.to/2rGFzLM
Affiliate link mentioned in the video for Milwaukee 2457-21 3/8-in Cordless M12 Lithium-Ion Ratchet Kit amzn.to/2rrNJdB
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: How-to-Autom...
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-eslick-819839118
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive

Авто/Мото

Опубликовано:

29 янв 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 120

@rondurant5286 7 лет назад

Thank you Brian, I need to do this myself on my 2004 and the way you went through and explained everything has made the job achievable and has saved me a lot of heartache. Thanks again great job

@bossmann6358 6 лет назад

Brian, I can’t thank you enough for your step by step easy to understand video. With the help of a friend, we were able to get the job done in 3.5 hrs! Not too bad considering I have never done this before.

@jackvang87 5 лет назад

Man this is a blessing. You were so clear and concise with your directions. I have full confidence in doing this myself now. THANK YOU!!!

@Dailyfiver Год назад

I have a 2000 Lexus ES300. You DONT have to remove anything, the process in this video just shows how to get easy access to the plugs. I replaced all 6 plugs in my engine yesterday without touching the intake assembly. I even got the back 3 plugs with the engine cover on. The hardest part is getting the old electrical connectors off, but the trick is to get small needle nose vise grips to lightly hold the plastic connector tab open, and then use a medium sized flat head screwdriver to wedge the connector off of the coil pack.

@dzuso9177 3 дня назад

Ok Mr. tiny hands 👍🏽

@ahmadghosheh3104 6 лет назад

That's just insane amount of work for 3 plugs, Camry V6 ain't any better

@HowtoAutomotive 4 года назад

Ahmad Ghosheh yes it’s the same 👍

@suhail802 2 года назад

@@HowtoAutomotive @How to Automotive I thought I would try this myself for fun and to save some money but after watching this, no way!! I'm gonna cash out, fuck it. Just had one spark plug, alternator and battery go bad at the same time a couple weeks ago. My mechanic only changed that one plug and coil, along with the alternator and battery but not the other 2 plugs - probably trying to save me money on additional parts because the other 2 still worked (he's always trying to save me money, good guy really). I got a 2002 Lexus ES300 with 175k miles and I'm pretty sure those 3 plugs were not changed before I bought it and I didn't get them replaced either - I have had the car since 2012 @ 70k. Do you think I should get the other 2 replaced even if they are still working? I'm hoping it will help with the idle - it fluctuates from 650 to 350 rpm when in park and sometimes in drive while stopped at the light and there's also a slight delay in acceleration off the line. Before getting all this work done, the car always idled at 500 rpm which is about low from what one of the technicians told me but it was always consistent at 500 rpm and didn't fluctuate like it does now. I've had the valve gasket cover, throttle body, knock sensor (they also did the 2 rear spark plugs and coils while there in there for the sensor) and the above mentioned spark plug all replaced at different times in the last 7 months. I just got the ATS fuel and oil treatment in the mail and I'm planning on doing that in the next couple weeks. Sorry, I know this was a lot. I would appreciate your insight if possible, thanks.

@chenmwu 4 года назад

Thanks for the walk through. It took me 3hrs. Only $50 in parts. Midas wanted close to $500. Good tip on the two hard to reach bolts using flex head wrench!

@richardsherrell1932 6 лет назад

Thanks for showing this. I was able to follow and change all the spark plugs and coils myself. I saved hundreds of dollars. Thanks again!!!

@HowtoAutomotive 6 лет назад

Richard Sherrell glad the video helped and you saved money. Thank you for watching!

@arturourquiza4164 7 лет назад

Brian, thanks for sharing this detail. I was able to clearly understand and follow your instructions. Saved me $300 by changing the spark plugs myself; 2 shops quoted the same ~2.7 hours. Thanks!

@HowtoAutomotive 7 лет назад

Arturo Urquiza glad to help. Thank you for watching!!

@LovingHeart835 5 лет назад

Man they trying to charge me 600$

@LovingHeart835 5 лет назад

@@HowtoAutomotive My gosh I wish you were in California 😭😭😭

@HowtoAutomotive 5 лет назад

Nakima Parks I’m in San Diego

@guypolito4648 5 лет назад

Crazy number of steps but not all that hard really, just have to go reeeeeal slow, unless you're a professional mechanic. I'm not. So here's my tip for anyone actually doing this. Change the ignition coils at the same time, eBay offers a whole set of 6 pretty cheap and if you let a shop do it when one does go it's crazy expensive. And then, change that rear valve cover gasket at the same time while you have all that crap off, just do it. And finally, have all the parts marked out, ready to go. I also used colored magic markers on the vacuum line ends. Great video, helped me tons. Saved me 500 bucks. THANKS!

@stevemccooleq 3 года назад

I agree that I would change the 3 rear coils while you are back there. But don't use those cheap Ebay ones, they will fail and you'll be back there again in 30k miles. Use Denso coils from Rock Auto (about $50 each but worth it), Denso Iridium plugs and you won't have to go back there for another 100k miles. Denso is the OEM supplier for Toyota/Lexus ignition parts.

@jumbe Год назад

Bro you are THE best! THANKS for the clear instructions with socket sizes and amazing camera work.

@calcoastwines 6 лет назад

Thanks for your video. Did my Lexus E300 today, followed your steps, went smooth. I got lucky, I guess, the back bolts on the support braces for the plenum were not to bad. Thanks again.

@HowtoAutomotive 6 лет назад

George Montiel glad the video helped. Thank you for watching!

@stevenhinds9843 Год назад

Good job Brian! You were very calm and patient and thoroughly executed the job w/o negligence, and your attention to detail helped me out a bunch, Lexus sure doesn't make it easy to get to those rear 3 plugs... Lol thanks again Brian!

@researchandbuild1751 5 лет назад

Finally a freaking video showing the rear plugs

@HowtoAutomotive 5 лет назад

Good luck with the repair. Thank you for watching!

@omegarex909 4 года назад

Agree

@brianm4831 2 года назад

Wow. I sure am glad Lexus made the plugs easy to get to! Great job BTW.

@1keykneedeep 5 лет назад

All that for some damn sparkplugs

@SaYYE 7 лет назад

Very Informative My Mechanic just had to change my Fuel body very pricey.

@anthonyromero4524 4 года назад

Wow! That was tuff! My 98 ES300 is no joke! I made it. Dang! I saved money tho haha nah really, I don't think I'll do that again on this car anyway. Prob once in a lifetime. Thanks for the help!

@ericmasi7511 2 года назад

Best video on this replacement!!

@user-ht2pz6mm4t Год назад

Outstanding tech pointers!!! Thank you helped me out tremendously!!!

@trevisbooker8675 3 года назад

Great video! Very helpful

@chriscarter2 3 года назад

I thought doing spark plugs on my corvette was a PITA.. really not looking forward to doing the gf’s ES300 lol Great video!

@nikkig5153 5 месяцев назад

Great video! Thank you. So how long was this whole process when you did it? The video made it look faster than I think it would be.

@robertocommander2153 4 года назад

You are a hero Thank you for the information

@HowtoAutomotive 4 года назад

Thank you!

@carlosinchile 3 года назад

Thank you sir. You are a Good man!

@jirojosephesman8175 5 лет назад

Thanks for sharing your knowledge...

@HowtoAutomotive 5 лет назад

jirojoseph esman thank you for watching!!

@LPFHelios 6 лет назад

This video was a godsend. I replaced all my sparkplugs and the 3 back coils so I won't have to worry about them and at least 1 was bad. Thank you so much!

@HowtoAutomotive 6 лет назад

LPFHelios glad the video was helpful. Thank you for watching!

@TuanNguyen-yq6os 4 года назад

Thank you for the video! It is very helpful. I have one question about idling on 2002 es300. I have recently replaced a battery in my car. My car starts and idles about 800 rpm when it is cold but when it warms up, idle will drop all the way to zero then stall. I can still drive the car but I have to put a foot on brake and a foot on gas pedal to keep idle up at stops and lights. Lots of people have the same problem after replacing the battery. Could you help me ( others ) out by giving us some advice and instructions on how to fix it. I really appreciate your help in advance.

@nicknguyen4181 3 года назад

It’s took me 2 days to think about it and I know . You need to remove all engine air filters + box out then spray into throttle with the carburetor cleaner then clean all the gut ( old oil stick all around in side the throttle) when it’s cleaned . Put air filter + box .. back on and it’s will be good to start the engine. Well done

@AXIOS.By.Kennedy 3 года назад

@@nicknguyen4181 you're correct. I had the same problem when I unplugged the battery to do electrical work. Cleaned out just the front end of the throttle body and it fired up, sitting at about 600rpms. Still gotta clean the rear when I do my plugs. Wish me luck.

@shreda125hilux7 5 лет назад

I've done all the spark plugs on my 99 V6 Camry without removing air intake manifold. Just need a small ratchet + extention and wiggle around your hands haha. I also have this exact 2002 es300, i don't think theres as much room as the camry to do it without removing manifold

@kevinmetcalf6371 Год назад

Good job bro

@FawziBreidi 5 лет назад

where i can find the gaskets for Exhaust manifold for this car? can't seem to find the perfect fit

@AntonNguyen-n8r 26 дней назад

Good video

@Rob111270 5 лет назад

What's the equal to 8mm between E4 and E18 on torx sockets? I don't see 8mm torx sockets.

@zakmoon7065 11 месяцев назад

Wow lots of work for this job but well worth it for these engines

@tasloc 7 лет назад

Thanks for the vid... just wondering would this be the same process for the 2007 es 350???

@HowtoAutomotive 7 лет назад

Bigtai inker it's similar but they are different engines.

@dvalle1100 5 лет назад

OK...I really have to study this video!! I was only able to get to the passenger side plug in the back without removing the manifold. There is literally no wiggle room with a ratchet for the other two. I should probably replace the gaskets while I'm at it!! Do you have a video on how to remove the valve cover to replace the gasket in the valve cover? Thanxxxx :)

@pdorsey305 5 лет назад

If you want to know how to repair anything on your vehicle download Alldata. Com and search your car it's only $25 a year and they will tell you how to repair anything on your car and all the tools you need we use this program at my school I went to UTI and we repair cars so easily

@newbeginning6397 Год назад

Am thinking about buying one of these es300 2002 would you say it's a good buy?

@researchandbuild1751 5 лет назад

Does taking off that strut tower brace cause you to have to get a re-alignment? Does it affect the strut position? It looks like you have to end up loosening the strut entirely on top.

@terryherrera5252 5 лет назад

Research and Build NO it’s a collision strut !!

@jadilan82 2 года назад

Thank you!

@jefegarpez6505 7 лет назад

Great Video! What is the difference between a 2002 Lexus ES300 and a 2001 Lexus GS300 when it comes to replacing spark plugs?

@HowtoAutomotive 7 лет назад

mario garcia it's the same. You can get it done by following this video. Thank you for watching.

@0569138373 7 лет назад

can i change the coil on cylinder number 1 without taking the intake off ?

@HowtoAutomotive 7 лет назад

A Saleh cylinder #1 is under intake.

@hookyjo72 4 года назад

This is why I'm buying a 2001 Camry with a little over 85,000 miles 4 cylinder easy to work on

@garymiller2056 5 лет назад

How did you get the back support bolt for the plenum back in ? (Just feel it with fingers ?)

@HowtoAutomotive 5 лет назад

Easiest way to do it is to make sure the bottom bolt on the bracket is loose a little bit. And you can get that from underneath. Then you can reach your hands around the back of the manifold and start the bolt because you have a little bit of play to wiggle the bracket up and down left and right get the ball started.

@HowtoAutomotive 5 лет назад

Themassofmenlead Most likely you’ll be OK. But there’s always that chance.

@ericmadden1701 6 лет назад

Now that’s the only way to get to the 3 back plugs trust me I’ve tried.

@dvalle1100 5 лет назад

UGGHHH!!!Yes I know I was only able to get to the rear one on the passenger side. There is LITERALLY no wiggle room with a ratchet for the other two.

@ucheyaclinton1356 6 лет назад

I have a 2002 ES 300 Lexus, from OBD reader, the 6 plugs need to be changed. I have changed all 6 with new plugs and including the ignition coil, works well for a week at most and begins to misfire and takes up more fuel. Check with the OBD reader again, it says all 6 needs to be changed. Manually bringing out the ignition coil and plugs, you will see they are all bad already. I have done this changing of ignition coil and plugs more than 4 times without getting the solution. Please what else can I do to solve this problem? Expecting a reply

@HowtoAutomotive 6 лет назад

Ucheya Clinton I would check for vacuum leaks. If that’s ok possible timing belt is off. You may what to pay someone to check it.

@ucheyaclinton1356 6 лет назад

Okay thank you

@ahmadmohd1504 2 года назад

Why didn't Toyota made a longer hood and body so it's easy to access the rear plugs?

@amadeusgrandson7357 4 года назад

Is it same process for a 2004 Lexus 330??

@farajidunson656 2 года назад

I hope not, sheeeesh

@haowenao1748 3 года назад

Do I really need to change intake manifold gasket when change spark plug?

@jeremyboon 3 года назад

No but considering you probably won’t get in there again for another 100,000 miles, it’s worth the 12 bucks at an AutoZone.

@haowenao1748 3 года назад

@@jeremyboon truth truth, got the fucking lean code now , more time is being ask by my es300

@mycatisromeo 2 года назад

Do you have to replace your intake gasket while it's off?

@loden888 2 года назад

Yes

@loden888 2 года назад

See 10:06

@Miggys.Garage 25 дней назад

If you feel a bit of fear tackling this job. That’s ok, that is normal. You can do it!

@houseofhouse9840 3 года назад

All that for spark plugs and coils?

@stevemccooleq 3 года назад

It is nearly the same on all side mounted V6 engines. Did this job on an 2007 Ford Escape and it was very similar.

@LittleMopeHead Год назад

I've replaced spark plugs on the 97-01 ES300s--I thought that was a PITA, although I didn't need to take anything off besides the top cover, I used a swivel socket adapter and long extension. This looks hideous!

@sallysteele8402 7 лет назад

this appears to be ridiculously difficult just to change spark plugs. If I had known all this I would not have bought this car. I have always had cars where I could see the spark plugs and I always changed my own plugs. I need to be a Master Mechanic to do this job myself. I could get into too much trouble trying to do this job myself. Unfortunately my check engine light shows Plug 1 is misfiring. I sure will have to drive it this way for a while.

@HowtoAutomotive 7 лет назад

Sally Steele they don't make it easy anymore do they. If I was you I would take it in and have somebody replace that spark plug or replace the spark plugs. Driving it with a misfire is very dangerous for the catalytic converter. The gas is not being used in the combustion chamber goes down into the exhaust and gets re-burn in the cat and with all the additional fuel can cause it to melt.

@adriansamuels5120 6 лет назад

I agree.. .I thought I could do this myself.. I will destroy my car if I try to take all these parts off. I am tired just watching.

@CashApp-HelpMeStayAlive 6 лет назад

Im a mechanic and i HATE that for this engine on this ES300 everything is a nightmare to reach and get to . Miss the GRAND MARQUIS . ....YOU WANT A DO IT YOURSELF EASY JUST AS RELIABLE CAR AS THIS LEXUS IF NOT MORE ?? GET A 2006-2011 Grand Marquis And enjoy your life. GO LOOK AT VIDEOS FOR MARQUIS AND SEE HOW EVERYTHING IS SUPER CAKE. I CHANGED THE STARTER ON THIS ES300 AND IT WASNT TOO BAD . . UNDER THE AIR INTAKE BOX . TOOK INTAKE BOX OUT AND REPLACED IT FROM THE TOP . NO NEED TO GO UNDER THE CAR. THIS IS A PAIN FOR REAR PLUGS . THE FRONT ONES SHOULD BE EASY . MY ADVICE CHANGE THE 3 IN THE FRONT AND NOT THE REAR LMAO . TILL YOU CAN HAVE SOMEONE DO REAR.

@tr8086 4 года назад

@Fredo Cuomo lexus best Car

@stevemccooleq 3 года назад

That's why you want to use quality plugs, Denso or NGK Iridiums that are good for 100k miles. Don't use cheap plugs that have to be changed every 20k miles.

@trapp7763 5 лет назад

Just buy a SWIVEL SOCKET extension. Easier that way. No taking off nothing

@julian-H47 Месяц назад

Bro there is 2 bolts behind the manifold on my 2002..

@blessedbythesun9209 5 лет назад

You didn’t show us that you gaped the spark plugs is that important to do so if they are not

@Dailyfiver Год назад

If you buy quality plugs you won’t have to worry about that

@LovingHeart835 5 лет назад

My 2003 looks different , this makes me sad. The shop wants 600 $ to do this. I can do it myself with right tools and correct instructions

@rubenolvera6559 7 лет назад

my bad i was going to reply somelse im sorry

@FreedomRock44 3 года назад

Great video but the camera view is annoying.......it should be wide left to right not north and south. would have liked wide angle view!!!!!!

@HowtoAutomotive 3 года назад

You’ll have to check out the newer videos. This is five years old

@JuanWick209 2 года назад

Fuck that, I am paying to get it done

@HowtoAutomotive 2 года назад

Well I’m glad the video helped you make the right decision.

@brianphillips5924 4 года назад

I have an 03 Lexus and I want to beat the crap out of the guy that made this motor

@kateamberlese 5 лет назад

Holly fuckin shit i needa just buy a new car

@dianereinhart9712 7 лет назад

Volume suX, too much noise in background. Why do these guys post these videos with no REAL VOLUME!

@HowtoAutomotive 7 лет назад

Diane Reinhart it not a Hollywood studio it's a real shop. But this is one of my first videos and they are much improved. The volume is boosted now.

@planetlizz 4 года назад

Geez whatdya gotta do to change the oil? This process is SERIOUSLY ridiculous. I'll be staying loyal to Honda.

@mycatisromeo 2 года назад

Allow me to summarize: ... ... ... This is a bullshit job 😂 Did my thermostat the other day. Had to literally take off the starter to get at it. Crock of crap 😂 With how good japanese engineering is, why in the fuck they didn't make the manifold have gaps between and position the tubes so you can access the rear plugs...but NOOOOOO, that would make too much sense.