How to replace sway bar links jeep renegade 

Just changed mine after watching this video. You made it so clear that I had no issue getting it done. Much appreciated!

Thank you for the video. You saved me $400 the dealer wanted. I found that by cranking the steering all the way to one side I was able to do it without raising the car or removing the wheel.

Excellent info. Thank you! Very helpful for understanding my 2018 Renegade. Much appreciated

I'm going to be doing this in a few days -- im getting MOOG k750795 // I have read on numerous forums- tighten till snug while its up off the tires- then after you got tires back and its on the ground re-tighten -- then after a few days of driving it and letting things settle- tighten once again

I’ll add that you should just put the t30 or t40 on a drill or impact and switch it to tighten mode. Then hold a regular wrench on the nut. Use the close end of the wrench if you have one

My wife's 2016 renny needs the left front done , ill be doing it tomorrow , I think the trick with the new one not lining up is you need to jack it up a bit higher under the strut and it will help next time just so you don't have to force it in and potentially damage the new link ...great 👍 video thanks for your help

I did replaced mine today. Its definitely a pain in the a** using a regular wrench. Theres very little wiggle room in the bottom screw

Also. I learned through fellow renegade owners on FB. The MOOG. Is 1/4” longer than the stock ones. That’s why it shows as incompatible on Amazon. Can’t beat $16 each on Amazon. Same ones are $50 each at the auto stores.

def gonna go to Harbor Freight and get the 21piece Go-Thru socket set for $24 🙂

Do you have it jacked up on both sides of the car?

I've had my 2017 Renegade for 2 years. The seat bar links were faulty when I purchased and I got them done under warranty. Now 2 years later they're being replaced again. Is that normal?

The dealer just charged me over $450.00 to do this. They stated they had to remove the whole bumper in order to replace the right-side sway bar link only. Does the bumper have to be removed to replace the sway bar link?

What was the sign that these needed to be changed? My 2017 renny is making a knocking noise whenever I hit even the smallest bump in the road.

What about the rear links? Everything seems stable. Although I don't have a jack to relieve tension off of the suspension. I was told it was my left strut, causing a clunk over small bumps. Even though the sound is coming from the right. Is it a link or a strut problem?

Sir I have a 2016 model with 50 k on it and my links are fine... 2018 model and it has how many miles? and it needs links?? what was the cause for this repair? Thanks nice video Be well!

Does anyone know what REAR suspension scheme the jeep renegade limited fwd 1.6 mjet has? mcpherson or torsional axis?

Has anybody been able to put together quick disconnect endlinks like this ? For the renegade, Cherokee Trailhawk or compass ?

How do you have so much room to turn that ratchet on the back one?

I just replaced mines and two days later is broken again anyone knows why is this happening

My Jeep renegade is making a squeaking noise when turning steering wheel do you think it’s the sway bar links ?

Would this solve the clicking noise when turning lefthand right when stationary?

How much do swaybar links for jeep renegade cost

Do you have a link or part number for your new sway bar? I may have to do this to my wife’s and I want to make sure I get the right replacement part.

Good job the same for jeep comapss right ??

A garage wanted $250. to do that. I'll do it myself.

Can some one tell Me if this rear link will work on the 2020 Jeep Compass and what’s the part number

Bought new Swaybar links straight from MOPAR .. No new nuts, and they look dirrenty then what you have for a Compass....

Was this renegade awd?

Big O tires told me i needed Struts, got them changed, still make same sound…mechanic told me it was probably just Sway bar 😩😩

My new ones keep loosening up

Ughhh NTB charging me $220 to replace one of mine :( looks pretty easy