How to Replace the ABS or ESP Module in any Alfa Romeo 156 from 1997 to 2006.

Подписаться 10 тыс.

Просмотров 1,4 тыс.

50% 1

Hello guys! How to replace the ABS or ESP module (depending on version) in the Alfa Romeo 156, all years and versions! But the main thing is to understand why it is being done and what you should do to prevent this failure from happening. Or if it happens to be as late as possible. To understand this, I already have an extensive list of videos for brake systems of the most varied types. This list of videos and other videos for other areas of the automobile are below in the description
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
--------------------------------------------------------------------------------
PayPal link to help my channel:
www.paypal.me/...
Support the channel via MBWay: (+351)913225320
Patreon link to help my channel:
/ alfaromeonoproblem
--------------------------------------------------------------------------------
All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
• Behind the scenes, Alf...
Timing belts\chains How to:
• Alfa Romeo 155 1.9td t...
Alfa Romeo owners in need of help! I try to:
• Car sold with warranty...
Alfa Romeo Experts in Potugal (so far):
• New series! Alfa Romeo...
Ac Sytems, faults, solutions ans tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspension:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my research of parts: www.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #fiatstilo #AlfaRomeoNoProblem

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@kohutemil401 2 месяца назад

Saturday morning, coffee and Bruno with great video! Nice job, Bruno!

@alfaromeonoproblem 2 месяца назад

Thank you very much for this!

@jyttesteenbruhn3211 2 месяца назад

The ABS warning light did not light up at startup, with the exact same unit on my 1996 GTV Turbo. After testing on a very old FIAT-tester, I only replaced (used part from Germany) electronic part of the system. Works perfectly again.

@alfaromeonoproblem 2 месяца назад

Hello, thanks for watching. On my 155 I had to do that too. And some years later the light was off again, but this time was only the light bulb itself

@alfistialfisti1072 2 месяца назад

I congratulate you, you are a master who understands

@alfaromeonoproblem 2 месяца назад

Thanks for watching

@ianlee487 2 месяца назад

Its a joy to watch your videos you have such passion for alfa romeo like myself.

@alfaromeonoproblem 2 месяца назад

Thank you very much for watching

@automunirsi 2 месяца назад

Thank you man for this video... I have a 156 steel grey 1.9 JTD (the same of this video), I have similar problems and I will solve it after the summer season... I have other 2 cars and I can fix it with calm... Great Channel!

@alfaromeonoproblem 2 месяца назад

Very good. Thanks for watching

@ΧρηστοςΑθανασιου-φ1δ 2 месяца назад

Thanks one's again, i made this work 1 year ago , the takhometer wasn't work also

@alfaromeonoproblem 2 месяца назад

Thanks for watching

@k0kyvr Месяц назад

great video Bruno! i also have many faults with abs esp vdc and asr so this is very helpful may i ask you have you made any videos on electric seats? i have them on a 156, 2.5 2003, and i have no idea where or what to look for to fix it?

@alfaromeonoproblem Месяц назад

Hello. I do not have videos for the seats, no.. what is the issue?

@5Dale65 2 месяца назад

I believe I have the same ABS pump in my 2003 Stilo. It's Bosch 5-point-something for sure. It also clears the fault indicator itself. Had that happen to me when I put different size tires on left and right of the car. After a few kilometers the ABS and brakes lamps illuminated. I noticed they were gone after next engine start. Then I changed all the tires and the fault never came back. Other time the ABS lamp itself came on when I had one wheel in the air and spinned it for a bit with the engine on. This time I didn't turn the key off but lowered the car and started driving. After some time the lamp was gone. And by the way I have one important question to you Bruno. Is it possible to install a pump equipped with ASR (traction control) when I only have ABS by now? Would be really useful in wintertime. Cheers ☺

@alfaromeonoproblem 2 месяца назад

Hello. Thank you very much for sharing. You can go from abs to esp (asr, etc..) but you have to have more sensors. The accelerometer, the steering wheel angle sensor, wiring for all that, program the body computer for all that too

@djlosmi 2 месяца назад

Great video! Is it true that keeping the key in the lock on "on" / "acc" position (just before start of the engine with the key) - while changing the brake fluid with the pressure bleeder also bleeds the abs unit because the abs valves "stay open"? I heard it's like that supposedly on all cars, but I'm unsure how that could be true??

@alfaromeonoproblem 2 месяца назад

Hello. No, that is one true at all.. the abs only open the internals with abs activation or activation through diagnosis tolll. Remember that a car with abs behaves normal when braking, only when the wheels lock up does the abs come alive

@djlosmi 2 месяца назад

@@alfaromeonoproblem that makes sense to me! Thanks for the explanation! ;)

@RegularGuitars 2 месяца назад

My speedometer is not working, is it because of the ABS Module?

@alfaromeonoproblem 2 месяца назад

Hello, its your best bet, yes

@slavicaradovanova 29 дней назад

Hello Bruno, excellent videos. On my Spider 1999 I have same abs unit, no fault codes, but I cant get brake force at all on rear calipers. Mechanics suggested to replace unit, but is impossible to be found. Do you have any suggestion for cause of problem, corrector on rear is bypassed by houses and that didn't help... Front brakes are working well and on hard breaking abs is triggering. Hand brake is working fine. Thanks for assistance.

@alfaromeonoproblem 29 дней назад

Hello. I have my doubts the that it's the issue.. how is the master brake cylinder?

@slavicaradovanova 29 дней назад

@@alfaromeonoproblem After bleeding little bit softer than usual, that one can be purchased, i can try with this.

@alfaromeonoproblem 28 дней назад

@slavicaradovanova beware that the traditional brake bleed will destroy the cylinder.

@slavicaradovanova 26 дней назад

@@alfaromeonoproblem Thanks for advice, I will suggest to mechanic to follow proper procedure , hopefully new cylinder will solve the problem... As I noticed they have bleed the system on traditional way, last time. Will keep you posted.

@alfaromeonoproblem 25 дней назад

@slavicaradovanova the bleeding must be with a pressure device only. Not even by vacuum

@robertiocastillo 2 месяца назад

Hi thank you for your help, could you please help me with some problem, clutch pedal spring, I don't know where it is placed, can you help me? my alfa is 156 2.5 v6 thank you, greetings Robert

@alfaromeonoproblem 2 месяца назад

Hello. I have a bunch of videos for that, check on the description below the playlist for clutches and stuff

@EmanuelViviani 2 месяца назад

Thank you for showing the work. I have had to change the ABS module 3 times, but only the electronic module, because the brakes work fine. Is it advisable to change the electric pump as well? Another problem is that I think it is no longer available as a spare part. Do you know if there is another compatible model that is more modern? Thank you.

@alfaromeonoproblem 2 месяца назад

Hello. The motor is fine most of the times. You can have the entire module repaired at a specialist and assemble with warranty

@АлександрВладиславович-ф8л 2 месяца назад

Hello! How to register ABS 5.7 ESP ASR to the ECU in ALFA ROMEO 156 CF3? I swapped a 2.5 engine to 3.0. I flashed the ECU with a 166 3.0 map. Now there is an error U1706.

@alfaromeonoproblem 2 месяца назад

Hello. That fault code is communication error. The unit you are using cannot talk to the abs esp.

@АлександрВладиславович-ф8л 2 месяца назад

@@alfaromeonoproblem I know. I need to register iso in the ABS unit. This unit is also used on Audi and BMW. They are registered. Perhaps your device can register ABS via OBD2. I just don’t know, if I buy an ABS unit from 166 3.0, will there be errors in the steering wheel and the stability control unit? Or do I need to somehow change the ABS communication code in the 166 3.0 ECU map. I have a native 156 2.5 CF3 map. There are no errors with it. But the 3.0 engine does not work correctly. And with the 166 3.0 map, the engine works fine, but there is an error in communication with the ABS u1706. There is also an error p1314. The 166 3.0 has a different gas pedal. The 156 2.5 pedal needs to be somehow modified to fit the parameters of the 166 3.0.

@alfaromeonoproblem 2 месяца назад

@user-hb2pi9rc9j modifications are really not my thing and I do not have the experience or the knowledge for that. My autel machines do not do such things also, they are diagnosis and troubleshooting tools only. You must check that with a mods guys

@danieloide787b 2 месяца назад

I have an 156 and I'm very frustrated with the braking system... I've installed metallic lines, ATE Ceramic pads, ATE Typ200 fluid because it didn't brake like it should... And I'm not getting better... In a normal driving it brakes more or less okay, but if I want to do a emergency brake, or I'm driving more sporty, I could brake the hardest I can't feel a nice braking force. Obviously I've purged fine the system... Maybe it's the Pump itself? Or the ABS Module? What does your experience could tell us Bruno? Thanks!!

@alfaromeonoproblem 2 месяца назад

Hello. 156, 147 and GT babe excellent braking systems. You have to have an issue in the somewhere? The pedal gets too hard or too soft? The abs or esp contributes nothing to the stopping power or fade. The abs is just there to unlock locking brakes. Make sure your steel braided are good, personally I do not recommend, only normal ones and replace them every ten years

@danieloide787b 2 месяца назад

@@alfaromeonoproblem I had a 147 and it braked very good. My 156 brakes that bad since I've bought it... The pedal has a totally normal travel and it has a totally normal feel. It's a JTS TI, I don't know if that makes any difference

@alfaromeonoproblem 2 месяца назад

@danieloide787b should be the same. What brand of discs and pads?

@danieloide787b 2 месяца назад

@@alfaromeonoproblem ATE Ceramic pads and ATE Discs. Coming from Brembo Setup...

@alfaromeonoproblem 2 месяца назад

@danieloide787b with ATE ceramic the car as to stop very very good. Take out to the braded lines and use normal ones

@coelhoteixeira Месяц назад

Eu não sei inglês..................

@alfaromeonoproblem Месяц назад

Não seja por isso.... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-px_qHAa-NPU.htmlsi=vRpIMJ22WNW3shFc

@sanelb1147 2 месяца назад

I have a question and maybe with your experience you can help me. On my alfa gt jts 2.0 i am randomly getting p0300 and p0302 code. The engine can work fine and have lots of power and then from now and then it will start feeling sluggish and the motor code error will start popping up. What can this be?

@alfaromeonoproblem 2 месяца назад

Hello. Unfortunately we do not have any jts here in Portugal, for that I have no experience on those. But try to check out a possible crack on the coil plugs