How to Replace the drive belt on the Honda Fit 2007 to 2013

Подписаться 169 тыс.

Просмотров 34 тыс.

50% 1

Do you need to Replace the drive belt the Honda Fit 2007 to 2013 but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Honda Fit (2007 - 2013) manual covers petrol and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-...
What's covered:
Honda Fit (2007-2013) Haynes Repair Manual
Exclusions:
Does not include information specific to Fit EV models

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@maxcarter970 9 месяцев назад

Come on that lower alternator bolt is almost impossible to reach and you just gloss over it and fake that part of the procedure?

@bradgoldsmith9373 2 года назад

Very helpful.thank you.

@edmundb9025 Год назад

This car has no belt tensioner

@gordonz88 8 месяцев назад

It has a tensioner it’s just not an auto tensioner. Tension is adjusted with the alternator positioning bolt

@neilgunns8391 9 месяцев назад

I just did this on a 2011. It’s totally different. Find another video. Seriously.

@seanfyodorovich5230 Год назад

Just like the paper Haynes manuals-- 10 minutes explaining how to open your hood then glossing over the toughest parts. And then treating a wide range of models the same. Here's a hint, fellas: the 2007 Fit's lower alternator bolt is not accessible in the way shown here and, in fact, is about a million times more difficult to access. But, yeah, thanks for this guide.

@maxcarter970 9 месяцев назад

Exactly! This job would be a piece of cake if it wasn’t for that stupid bolt and they faked it in the video!

@michaelmiranda6297 23 дня назад

not true you can access the bolt just need the right extensions and a long flexhead wrench def helps.

@seanfyodorovich5230 22 дня назад

@@michaelmiranda6297 Not on my car. The bolt seized up and there was no access for adequate torque.

@chanman1975 11 дней назад

@@seanfyodorovich5230 what did you end up having to do? Asking for my fit.

@tonythai5991 Год назад

nice voices....lol

@targabill 10 месяцев назад

removing stuff you don't have to??

@jimothy138 4 месяца назад

you can also just use to the tensioner to loosen the belt... you dont have to touch the alternator.

@michaelmiranda6297 23 дня назад

tensioner is fixed this is incorrect

@michaelmiranda6297 23 дня назад

Dont forget to disconnect the abs module connector for more room. To do so lift up on the orange lock tab. It can be snug so you may have to wiggle it a bit before it pulls up.

@thomas5177 Месяц назад

I think because that was the Honda Fit that they produced in Tijuana .

@wedoitourselves3805 2 года назад

What is the correct size of belt?

@paulh6591 Год назад

For my two '10 Fits (original belts, have 180K and 200K miles on them respectively) I got a *Continental 5K1135* ($9.50) and for the nicer Fit a *Gates K050448* ($17.50). One is listed as being 1.135 meters (44.69 inches) inside circumference, the other 1.153 meters (45 and 3/8") outer circumference. No matter; both are indicated to be correct for the vehicle, and there are others, from other manufacturers. I'll guess the "K" in "K050448" is the designation for micro-V belt, "050" is probably the diameter in hundredths of an inch, and "448" the inner circumference, in tenths of an inch.

@wedoitourselves3805 Год назад

@@paulh6591 thank you. Very much appreciated.

@wedoitourselves3805 Год назад

@@paulh6591 i bought bando belt 5pk1140 which barely fit the FIT. But i managed. I guess the perfect fit would have been 1145 or 1150.

@stug45 11 месяцев назад

What is the service schedule for this belt?

@OMGWTFLOLSMH 4 месяца назад

I just inspect mine. If it's old and showing any sign of cracking, change it. Mine's the original (17 yrs), but only 40k kms (24k miles) and still looks fine. I don't drive the car much and it's always garaged.