How to replace the fixed charging port 

Thank you for your comment, we are glad to hear that it can help you.

@@etradesupply How many degrees did you use?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xyeLsiVzQW8.html U will get proper knowledge

You can use Foil paper too

If you use the right temperature it should not. In my case one of the pins inside the port broke, not the solder, so i didn't replace the solder. This port sits firmly in 4 holes, so usb pins aren't put on stress like in different devices. Also you need to be very careful if you got small components nearby, as they may move as you heat thing up :)

yeah. and shield the other components with tape or alluminun foil, on the board. you can blow that little resistors.

i do it the same way you described

Emmet Myers so whats up? Did the guy in the video did it wrong?

Rolly Yi yep, you can see the port melting and he wipes off the melted part with his tresers

Brent Simpson ....

yeahhh bad work

Because it is verry hard to do soldering in very small parts. And this is the easiest way......

Thanks!

The same part you are replacing in the video, but for the 8.4 pro.

***** you get it from ebay 2 oieces for 2 pounds

You will probably rip the pads up doing that so do not recommend it.

Todd Richmond I think it's best for the novice. I followed another tutorial that did as you suggest, and I ended up messing up the tracks when I couldn't really resolder each of the five pins. it charges, but no data. I got the nexus 7 brand new, used it every day all day for a year and a half, charge port problems arose. A 'reflow' would have given me probably another year then I'm done with that tablet anyway. Also, I think what had gone wrong with my original port was that the pins lost contact with the tracks. So I probably could have used the same port (though it was really loose and a new one would have been nice), remove it and bent the pins downward some, then reflowed it back.

Don't use God name in vain like gosh search the root word of gosh

​@@nonstop6823pull your panties up grandma😂

I agree 💯 percent with you on that comment,damn!!!!! Will this work on my Tracphone flip phone? I hope so!!!!!

Twizzer

No....

It's just a hot air gun.

Of course not.

It is a heat gun.

A hair dryer? Seriously? The simple fact that you asked that question means that you have NO BUSINESS trying to fix anything yourself. And I mean anything. Pfft...hair dryer... ::facepalm::

***** im not sure why your parents were so mean to you as a child but leave the guy alone as he is just asking a question and trying to learn. I feel sorry for you.

+FranchiseSIX5 👏

Google it. You are online anyways. Oh, and one other tip... don't breed.

thank you. :) I already googled for flux. you have been of service to humanity. Your anger and hate is really appreciated. Hope you enjoy your bitter life :*

+Lucano Deskovic ';√{}) "likes your comment" 🍻

so its not possible to tap power from the micro usb charging port??

Vishnu Hari Wow. I can't believe there are people like this walking around the world.

2,000,000,000,000 °F

Hot

Looks like it's at max 500C from the video, I would normally go about 330C and lots of flux

Do you want the cost from every shop? Or do you maybe just want to call your local repair shop and ask them yourself?

Kenneth Lenair heat gun ,you can get it in many places such as amazon or walmart

Kenneth Lenair heat gun desoldering