This video will show you how to change the Rear Wheel Hub Assembly on a 2015-17 Nissan Rogue. Tools Needed: Breaker Bar PB Blaster Ratchet Sockets. 21mm, 17mm, 30mm Extension: 3in &10in Mallet Hammer
Your video saved me a lot of grief. Thanks. I thought I had to take the E brake apart to extract the bearing. Job is still a real pain but this method made it doable.
Thank you sir, I need to get both done. Dealer wanted $1200, just ordered the parts and I'll do it myself. Was dreading removing the emergency brake like I saw in another video, you saved me a lot of headaches!!!
Thanks a lot man, everything was just like you said it would be. Brutal getting those bolts from the back. Took me 4 hours but you saved me a ton of time having all the right stuff. I used the bearing nut to hold everything together while I threaded the bolts back in and that helped for lining it all up. Thanks again.
So you could have taken the knuckle off as well to give yourself a little more room behind there, is more you have to do later but aint struggling with your fingers
5:44 if u don't get another person to align those bolts with the bearing on you're in for a world of pain people, they're definitely not gonna stay in their place if u put em on like that, they'll just wiggle out, u gotta have someone align the wheel bearing from the outside as you're on the other side getting the bolts in place and starting them.
Great video. I’m stuck on getting the hub assembly off. I’m going to try your trick (at 4m15sec) to put the axle nut in backward and tap that until the cv starts to move, freeing up the wheel bearing hub assembly.