Тёмный

How to Replace the Thermostat on a 2012 BMW 528i 

How to Automotive
Подписаться 214 тыс.
Просмотров 71 тыс.
50% 1

Brian Eslick from How to Automotive takes you step-by-step through the process of replacing the Thermostat on a 2012 BMW 528i.
Affiliate link mentioned in the video for MAHLE Original TM 25 108 Engine Coolant Thermostat Housing amzn.to/2qjUQ36
Affiliate link mentioned in the video for BMW 82141467704 Grey Antifreeze Coolant - 1 Gallon amzn.to/2qjMvMH
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: How-to-Autom...
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-eslick-819839118
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive #AutoRepair

Авто/Мото

Опубликовано:

 

28 апр 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@leroyrcrumjr9368
@leroyrcrumjr9368 3 года назад
Thank you that help slot.
@napieraustin
@napieraustin 7 лет назад
Helpful tip when pulling the fan shroud out. The right side clip has a hinge that folds clip in so you can pull out easier (2013 35i twin turbo)
@HowtoAutomotive
@HowtoAutomotive 7 лет назад
BraaapAllDay thank you for the tip👍🏻 and thank you for watching!
@respectiveperspectiv
@respectiveperspectiv 8 лет назад
Thank you so much for sharing!
@HowtoAutomotive
@HowtoAutomotive 8 лет назад
Glad to help!
@Neoviper240
@Neoviper240 6 лет назад
Thanks for the video!
@HowtoAutomotive
@HowtoAutomotive 6 лет назад
Brandon Duke thank you for watching!
@HaiHuynh-ww4ym
@HaiHuynh-ww4ym 4 года назад
THANKS FOR TEACHING YOU ARE AWESOME.
@HowtoAutomotive
@HowtoAutomotive 4 года назад
Hai Huynh thank you!
@alexpham481
@alexpham481 7 лет назад
thanks friend.
@HowtoAutomotive
@HowtoAutomotive 7 лет назад
Thank you for watching and writing!
@hectorelfatherr
@hectorelfatherr 4 года назад
Thank you for the video!!. By the way do you know if by any chance this might be why my cars RPM bounces while idling?
@HowtoAutomotive
@HowtoAutomotive 4 года назад
Hector Idarza If the idle is surging or bouncing I would look into vacuum leaks. This will make the fan run on super high speed even when the engine is cold.
@josh_felix
@josh_felix Месяц назад
Is there a gasket I need to get for this?
@leroyrcrumjr9368
@leroyrcrumjr9368 3 года назад
I couldn't get the tool into the holes holding the thermostat to the engine tried for 2 hours
@deansperformanceracing5730
@deansperformanceracing5730 3 года назад
well done!
@HowtoAutomotive
@HowtoAutomotive 3 года назад
Thank you!
@bamthebully
@bamthebully 4 года назад
Thanks a ton
@HowtoAutomotive
@HowtoAutomotive 4 года назад
Kevin Darian jr. Thank you for watching!
@DL-rz6tw
@DL-rz6tw Год назад
I just finished this job and those 2 bolts were an absolute nightmare for me
@saleenr6
@saleenr6 6 лет назад
Is this the only way to drain the coolant? seems very messy?
@biz4twobiz463
@biz4twobiz463 5 лет назад
YES, you can actually loosen a lower hose under the car first. Let the coolant drain, so that when you start removing hose connections to the eThermostat housing...you'll have less mess.
@smayascollection1197
@smayascollection1197 2 года назад
Is the coolent spilling around is not bad for the hoses around?
@mrsauce9307
@mrsauce9307 9 месяцев назад
No
@yungtrvplxrdsix6660
@yungtrvplxrdsix6660 3 года назад
Was it running hot
@salvadormoran8364
@salvadormoran8364 4 года назад
Is it the same for the 2014?
@gottgaame
@gottgaame 3 года назад
It should be
@JohnJHPark
@JohnJHPark 4 года назад
What would happen without draining coolant? It is less messy with empty coolant reservoir, but I guess we can replace thermostat without draining the whole reservoir if we can handle reasonable amount of remaining coolant in those four pipes. Thanks for the nice instructional video by the way.
@HowtoAutomotive
@HowtoAutomotive 4 года назад
JohnJHPark If you drain it or drain the coolant in the reservoir is definitely less likely to spill everywhere. Changing the thermostat only is not going to drain the whole system so you won’t lose that much coolant. If you don’t drain it the worst will happen is you’ll create a little bit of a mess.
@JohnJHPark
@JohnJHPark 4 года назад
@@HowtoAutomotive I've just ordered a new thermostat, and I'll do the replacement by myself. Much more confident after watching your video and this reply. Thanks again!
@HowtoAutomotive
@HowtoAutomotive 4 года назад
JohnJHPark Good luck this weekend. Thank you for watching!
@salvadormoran8364
@salvadormoran8364 3 месяца назад
Is it t30 or t27 😅
@ogcasanova5511
@ogcasanova5511 7 лет назад
How much will you charge to do a job like this
@HowtoAutomotive
@HowtoAutomotive 7 лет назад
The labor on that job is 1.50 hours. The shops labor rate here is 95 an hour. If you go to the dealer you expect to pay 125 an hour. And the Parts around 60 to 100 bucks depending on markup. + coolant .
@austinformedude
@austinformedude 7 лет назад
Dealer is now replacing these for free for 10 years 100k miles :)
@josetripp3203
@josetripp3203 7 лет назад
I tried to get this done. but its VIN based according to BMW. SMH
@dennisarriaza6891
@dennisarriaza6891 6 лет назад
Brandon Bosserman really????
@chiefoz7597
@chiefoz7597 6 лет назад
Brandon Wright does this apply to the 2013 328i f30
@charming0077
@charming0077 6 лет назад
So pissed and upset i followed your steps, which get cut of when it comes to removing the thermostat. I tried opening with T30 that screw broke. Now what???
@mhtsuman619
@mhtsuman619 6 лет назад
Armaan khan did u get it fixed ?
@charming0077
@charming0077 6 лет назад
Mohit Suman yes I will have to tow it to dealer.. this ain't easy job if screws are rusted.
@mhtsuman619
@mhtsuman619 6 лет назад
Armaan khan oh too bad , hope it gets fixed and idk how much the dealerships gonna charge you
@gottgaame
@gottgaame 3 года назад
Oh bmw makes it so easy smh 🤦🏾‍♂️
@JayJay-ot8uv
@JayJay-ot8uv 6 месяцев назад
Bmw are garbage
Далее
TOP 10 BMW N51/N52 Coolant leaks on BMW 328i E9x
17:03
BMW 528i n20 Water pump and thermostat replacement
15:29
How You Can Check Your Electric Water Pump
7:30
Просмотров 54 тыс.
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
Просмотров 2,1 млн
ОПТИМИСТИЧЕЫЙ ТРАКТОРИСТ
0:19