How to Replace Timing Chain 2002-2009 Chevy Trailblazer

Подписаться 532 тыс.

Просмотров 78 тыс.

50% 1

Buy Now!
New Timing Chain Set from 1AAuto.com 1aau.to/ia/1ATB...
This video shows you how to replace the Timing Chain in your 2002-2009 Chevy Trailblazer.
This process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaUt/1A...
• Phillips Head Screwdriver 1aau.to/oaUt/1A...
• Pocket Screwdriver
• Pry Bar 1aau.to/oFn/1AX...
• 10mm Wrench 1aau.to/oHE/1AX...
• 18mm Wrench
• 21mm wrench
• 8mm Wrench 1aau.to/ofH/1AX...
• 10mm Socket 1aau.to/oaEk/1A...
• 11mm Socket 1aau.to/oaSS/1A...
• 13mm Socket 1aau.to/oaSS/1A...
• 15mm Socket 1aau.to/oaSS/1A...
• 18mm Socket 1aau.to/oWi/1AX...
• 21mm Socket 1aau.to/oWi/1AX...
• 24mm Socket
• 36mm Socket 1aau.to/obe/1AA...
• 4mm Socket
• 7mm Socket 1aau.to/oaEk/1A...
• 8mm Socket 1aau.to/oaEk/1A...
• Axle Fork
• Brake Caliper Hanger 1aau.to/ofr/1AX...
• Fan Clutch Wrench
• Harmonic Balancer Holding Tool
• Harmonic Balancer Installer
• Harmonic Balancer Puller 1aau.to/oL/1AEH...
• Serpentine Belt Tensioner Tool 1aau.to/obB/1AX...
• Torque Angle Gauge
• Trim Tool Set 1aau.to/oPF/1AX...
• Adjustable Wrench
• Hose Clamp Pliers 1aau.to/odM/1AX...
• Needle nose pliers 1aau.to/ovS/1AX...
• Needle nose pliers 1aau.to/ovS/1AX...
• Pliers
• Side Cutters
• 3/8 Inch Drive Ratchet 1aau.to/oaSS/1A...
• Ratchet 1aau.to/oa7v/1A...
• Socket Extensions 1aau.to/oaSS/1A...
• Torque Wrench 1aau.to/oaeI/1A...
• 1 Inch Wrench
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ouM/1AX...
• Marker / Writing Utensil
• RTV
• 6mm Allen Wrench 1aau.to/obW/1AX...
• 8mm Allen Wrench
• Center Punch 1aau.to/ojo/1AX...
• Drain Pan 1aau.to/orL/1AX...
• Floor Jack 1aau.to/oLy/1AX...
• Funnel 1aau.to/ofd/1AX...
• Hammer 1aau.to/oIi/1AX...
• Jack Stands 1aau.to/oIU/1AX...
• Magnet - Extendable
• Measuring Tape
• Pick 1aau.to/oAx/1AX...
• Razor Blade / Gasket Scraper 1aau.to/ogo/1AX...
• Rubber Mallet 1aau.to/oex/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy Trailblazer 2002-2009 1st Generation: • Chevy Trailblazer 2002...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@TRQ 2 года назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@jackassofalltrades2126 7 месяцев назад

Every 15 minutes or so, checking the title of the video, oh yeah, we're still getting to the timing chain 😂 Great video seriously thank you for showing every single step, so it's no surprises when we actually get around to it 👏

@abdullahbinabbas1706 Год назад

Oh my god, the amount of effort that he put in this video is amazing, I don't think that there is any video on youtube which explain in this detail, like this one thank you so much for helping us, you are amazing

@peterbambenek6598 Год назад

I have been doing repair for over 35 yrs in my Auto shop and have never done one of these before. It is an AWESOME VIDEO. Thank You !!!!

@belltolltothee261 Год назад

this procedure just to change the timing chain! Brilliant design!

@helpallofem4428 10 месяцев назад

So basically, remove vehicle from timing chain.

@jc9930 4 месяца назад

I cannot believe with all that rust that everything came apart that easily. You are very calm. Its like watching bob ross fixing vehicles. Thank you!!

@TRQ 4 месяца назад

+@jc9930 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@ainstaink8312 Месяц назад

Definitely one of the best detailed videos out there! Very nicely done! Thank you for the video and the great help that will provide so anyone going to this extensive job!

@FelixUmbra Год назад

The amount of ease you seem to be having with taking things out... It's makes me cry. My 02 is fighting me EVERY. STEP. OF. THE. WAY. 4WD actuator. Chemically welded. Chain guide bolt cover plugs. Locked up. Whole thing. Nightmare. Hotel. TrivaGo. Joke over, The head gasket blew out. Sprayed hot oil into the alternator. I love that vehicle. And I will fix it myself even though I should just pay an expert.

@StayPositive-sd8op 2 месяца назад

I wish I could come work with you. You are so patient and explains everything. I got the 04 Envoy about 5 years ago from someone that gets them from Auctions, so I don't know what Maintenance had been done to it before getting it. I've been trying to get the sparkplugs changed but having problems trying to get the wire plug Disconnected, the one that's on the top back of the canister thing that the air filter hooks to. So I went and bought some sockets and ranches in a set weeks ago and some jack stands

@aaronrose186 6 месяцев назад

And just to think, all the bottom end dissasembly is just to get one 10mm bolt out that some genious engineer decided to bolt to the timing chain cover.......id like to meet that guy!

@BenProVids Месяц назад

I'm currently doing this. I would love to meet the engineer that decided to put the axle shaft through the oil pan.

@richardrodriguez2819 Год назад

Hey this guy is awesome! Thank you for your no BS video. Straight to the point! First time I’ve ever worked on a timing chain and this guy made it fun and simple. Thanks bro.

@joshuakeith8710 2 года назад

Geeze. 2WD seems like it’s be a bit easier but that is a major flaw in design. Great video tho. This is one of the best I’ve seen. 👌🏼

@TRQ 2 года назад

+Joshua Keith Thanks for watching our video! 1aau.to/m/Shop-TRQ

@dpaulak 2 года назад

In this case, I would jack up the battery and put a new vehicle under it

@carlosserrano3920 2 года назад

Thank you I needed the laugh. I'm definitely a bit in over myhead with this job but I got it. Great video by the way.

@MeGustanLosTacos1013 2 года назад

@@carlosserrano3920 were you able to do this job without any issues? It looks quite complicated. Looks like a nightmare.

@ezv.5701 Год назад

😂I think that's what I'm about to do, thanks for the tip.

@rlvtrader Год назад

Wow, Amazing video. I think I have this issue unfortunately, I need to consider if I'm going to put the effort into doing this.

@Thomas-ul3uy 2 года назад

Glad I live in the south and not dealing with all the rust

@JESUSRUIZ-ke9yc 2 года назад

Tremendo video, buen mecanico, herramientas adecuadas, sinceramente felicito al mecanico. Saludos desde Maracaibo Venezuela.

@ericg4915 Год назад

Los Santos Holmes

@jmead6121 9 месяцев назад

wow ....a lot of detailed work involved ..so sure some shops charges more that some cars are worth lol

@billknight964 7 месяцев назад

I will NEVER buy a Trailblazer. Your Vid convinced me,

@sjn7220 2 года назад

Wow. Not for the faint of heart.

@ericg4915 Год назад

What did u expect?

@tylerbeard7 Год назад

These videos are awesome man! Keep up the great work!

@apz39 8 месяцев назад

ok so what I learned in this video is Im F-ed

@billknight964 7 месяцев назад

This would be a good Ad for Ford.

@venturalopez8309 Месяц назад

Good job

@matthewkent-ir1te Год назад

So if I'm going to be doing my oil pan on a 2005 Chevy trailblazer 4 x 4 should I follow the same process all the way up till you drop the oil pan

@phillipperry7437 10 месяцев назад

Wow great video man

@servansosolis2276 2 года назад

If you hold a marker tip up the ink flow’s back away from the tip so it won’t release anything 😁 jk bud definitely the best video I’ve seen for the vehicle hands down and way more explanatory on parts and safety tips. Also I have no idea why but for some reason you seem like the chill kinda person to blaze a jay with lol something tells me your funny af 😂 just saying

@Glock209 10 месяцев назад

Awesome video very informative. Can you tell me want the book time is to do that job on a 2WD? I’m going to be doing mine. Again great video

@w8what575 5 месяцев назад

I’m just gonna find another trailblazer and rebuild the engine out of it and swap them out…with all the work it takes to do this, might as well

@joek7413 Год назад

Great start to finish video. Amazing how much bottom end disassembly you have to do. As mechanically inclined as I think I am I don't think I would attempt this job. I would definitely need a few specialty tools to complete, although, my Florida TB is cleaner to work on and is a 2WD I'm guessing there may be a little less work on the bottom end. Just curious on how many miles were on it to need a timing chain?

@marcosgtz3886 Год назад

Excelente video merece 1000 estrellas 🎉🎉🎉🎉🎉🎉🎉🎉

@hsimp316 Год назад

I am going to be doing this job in the fall. Already replaced full front suspension, alternator, water pump, tensioner's, clutch fan, wheel bearings , axles. While I have this apart, do I replace the rack n pinion, radiator and thermostat. What else should I consider changing being the truck will be torn down. Obviously all gaskets will be replaced.

@davidramirez7053 8 дней назад

Great video! Im currently doing this job right now. That crankshaft pulley bolt is giving me most trouble. How long did it take yall to take out this bolt?

@silvertorres70 9 месяцев назад

Every other video I saw said to remove the rack and pinion and remove oil pan. I have an 05 trailblazer and the cover isn't coming off as yours. Do I have to revive oil pan?

@angelf9800 7 месяцев назад

Where can I purchase? The rubber grommet the one he took off by transmission bolts.

@thehammermanduke Год назад

Good Stuff!!!

@mikekostuk9960 2 года назад

Wrong video looking for the timings chain

@chain173 Год назад

Awesone vid. But is bizarre you have to remove knuckles, axles, driveshaft, and steering rack in order to remove oil pan, so you can then remove oil pick up, so can then remove timing cover. Good grief.

@jeffcotner4255 Год назад

I’ve looked at the parts and I’m certain that timing cover come off without removing the oil pan!

@josearana7704 8 месяцев назад

Wats the best way to remember how to put everything back together cuz that's a lot of components u took off???????

@caseytodd1140 Месяц назад

So what was the purpose of removing all the other stuff if you can get to it under the hood after removing the fan and fan shroud

@whowho7969 Год назад

I’m using a junk yard head for my 4.2. It’s complete of a running engine does anyone know which valves should be open when installing on the engine?

@dronebaronnoncommercialpho5494 Год назад

Id never buy a trailblazer now. What a shitty thing to put a technician through.

@MNDmanIII Год назад

So would any of you go through with purchasing one of these trail blazers if the power steering pump, transmission, & brakes were just done on a 2008 with 145 k miles selling for $800 & now the timing chain just went out.

@1fordguy1 Год назад

If you want to quadruple check your marks. 14 revolutions of the crank and all the timing marks should be lined up.

@alexberrios21 Год назад

So what was the issue that caused all this to be replaced?

@1fordguy1 Год назад

I can not get the passenger side transaxle out any ideas? Mine is not nearly as rusted as the one in the video.

@livininsouthflorida7058 Год назад

Excellent video thank you for sharing it. I did it on my car. Everything came out perfect except for the fact that my AC only blows out the defrost now I can’t get it to come out the vents for some reason and I haven’t touched anything on that. Any suggestions?

@JimmyReyesHerrera 19 дней назад

La cantidad de mano de obra mas las herramientas y el elevador es dificil para alguien que empieze en la mecanica o quiera hacer reparacion por su cuenta como es mi caso vea que hay gran inversion en materiales

@jeffcotner4255 Год назад

The only problem is the oil pick up is bolted to the timing cover and won’t come off!

@EZ4U2Say11 Год назад

Make sure you replace these cam bolts but I’m reusing these ones 😂 . That’s a no thanks I have the 4wheel drive Ima run it till it lets go

@StayPositive-sd8op 2 месяца назад

My brain had a anxiety attack after the 30th screw you took out. Do u just put all the screws in a pile and know which one goes where when putting it back together..

@davidlofton6674 Год назад

maaaan!!!!

@lionellavallee1919 Месяц назад

Why not show how to tighten harmonic pulley bolt??

@BusyBeeInspector Год назад

FFS 2 more bolts and you could replace the the piston rings

@belltolltothee261 Год назад

Great Video. But what a stupid design just to change the timing chain. Why not design something just to remove the front cover and change the timing chain instead of removing the oil pan and everything around it just to remove the front cover to get to the timing chain.

@freddymolina8087 Год назад

me gustaria saber porque no cambio los piñones de los arboles de levas

@winter_soldier88 День назад

And he makes it look easy if you don't want to hate your life decisions dont do this job its a nightmare 😂

@ianconley6673 4 месяца назад

Lol rips it out* ....yeah, slides right out 😂

@nickd.7267 6 месяцев назад

Oh my God .

@P3cNavyBrat Год назад

How did he do this job without cussing?

@Brebear6971 22 дня назад

Looks like you are getting ready to pull the motor just to change the timing chain . What is up to doing all of that if you don't pull the motor. I would hate for him to show how to change the spark plug he would start at the rear end and work forward. Did he smoke a Doobie and forgot what he was doing.

@Jeffnham 11 месяцев назад

I have a 2008 with over 270,000 miles, suspecting the timing chain is going, it's probably as rusty as the one in this video, maybe worse, not worth it! I'll buy a new vehicle before I spend time and money to go through all this hassle! And I just put new tires on it!

@gerardosilvera6772 Год назад

💪🏾

@Khapitan-1 Год назад

🤝🏻👍🏻💪🏻

@hyperspaceexplorer5594 Год назад

All that disassembly just for the timing chain??? I'd imagine it's a nightmare to change at home without that type of vehicle lift.

@TRQ Год назад

+Hyperspace Explorer Thanks for watching our video! 1aau.to/m/Shop-TRQ

@AdamTamillo 10 месяцев назад

I took all the bolts off the timing cover and it’s still not coming off. I have a 05 Chevy trailblazer

@TRQ 10 месяцев назад

+Adam Tamillo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c