How To Replace TIMING CHAIN KIT on VW Audi EA888 2.0 tfsi tsi Video Tutorial

Подписаться 13 тыс.

Просмотров 80 тыс.

50% 1

#timingchain #tutorial #ea888
Timing Chain problems on Audi 2.0 tfsi and VW 2.0 tsi. Replacement, Removal, Install full Tutorial video.
00:00 EA888 Timing Chain Replacement Tutorial
0:51 How to Remove Timing Chain on 2.0 tsi / 2.0 tfsi EA888 Engine CCZA VW Golf GTI Audi A3
15:50 How to Install Timing Chain on 2.0 tsi / 2.0 tfsi EA888 Engine CCZA VW Golf GTI Audi A3
The EA888 being the newer chain driven engine being seen as bad and unreliable due to timing chain tensioner failures and excessive oil usage.
Golf GTI Mk6 (2009-2012) - 207bhp - Engine code CCZA
Audi A4 Avant (B8) (2009-2015) - 207bhp - Engine code CDNC (from 2008-2013)
Skoda Octavia TSI 2.0T Mk2 Facelift (2008 onwards) - 197bhp - Engine code CCZA
This isn't an exhaustive list just Golf, A4, S3 Sportback and Octavia vRS models.
In this episode I will show you the timing chain kit replacement job on this 2.0 l petrol engine CCZA.
I have bought this Audi A3 Black Edition on a Salvage Auction for a qick project. Turned out to be sitting for over a year with huge job ahead in order to put it back on the road.
Stay Tuned for Part 3!
Please SUBSCRIBE, so you don't miss any upcomming projects.
THUMBS UP if you like my videos, many more to come.
____________________________________________________________________________________
More videos like this:
BEST WAY How to Remove ENGINE REMOVAL The Fast & EASY Way Engine Strip for AUDI VW
• CCZA Engine REMOVAL Fu...
AUDI A3 How to Remove Door Card, Door Lock, Window Motor, Door Handle to Fix in Your Car
• HOW To REMOVE Door Par...
MUST WATCH! How to buy Salvage Cars like a Pro - Outsmart Salvage Auctions Before Bidding!
• Smart Way To Bid on CO...
REBUILDING Her DREAM CAR Challenge from Salvage to Whip | Part 1
• Cat S Salvage Auction ...
REBUILDING WRECKED Smashed Mini Countryman | Part 2 | Suspension Fix Nightmare
• Cat S Salvage Auction ...
Engine OIL CHANGE on Cars with Plastic Oil Pan Audi A3 A4 A5 VW Golf 7
• EA888 Engine Oil Chang...
How To Change AUDI VW 7G Dual Clutch DTC DSG Gearbox Oil Change Transmission Fluid Service
• Oil Change Tutorial fo...
How to Fix AUDI A4 TFSI OIL LEAK PROBLEMS Timing Chain Cover Leak Solved
• How to Fix EA888 Gen 3...
How to fix Audi COOLANT LEAK Common Problem Must See Before Being Ripped Off
• How to Fix VW Audi COO...
OBD11 How to Reset Engine Oil Light on AUDI VW using OBDEleven OIL CHANGE RESET
• HOW to RESET Change Oi...
Audi S4 Timing Chain Problems. Audi timing chain replacement cost. Audi S4 timing chain guide failure. Audi timing chain zafira. Audi rs4 timing chain kit. Audi timing chain action. Audi timing chain tensioner failure. Audi 3.2 engine timing chain. Audi timing chain diy. Audi timing chain noise. Audi timing chain problems. Audi cars with timing chain. Audi timing chain tensioner lawsuit. Audi A3 Timing chain swap.

Авто/Мото

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@ojsnetwork 3 года назад

Very helpful. I am replacing mine now (A4 B8) and have watched a number of timing chain videos. Yours was very informative and thorough. I hadn't planned to do so, but after listening to your explanation I am now replacing the o-ring on the cam bridge, and the gasket on the top timing chain cover.

@aminkhan736 Месяц назад

i just did mine, thank you so much

@gee3883 6 месяцев назад

I've seen other vids and they recommended replacing all the bolts on the chain cover plus there is a tightening sequence. some good tips here mate cheers.

@joshuam7552 3 года назад

21:34 *FYI MAKE SURE* that you pull the small wire spring clip as far back as you can towards the base of the serated shaft--which will lock the shaft into its extended place. *REASON BEING* is that if you lose oil pressure, that tensioner won't back-in to the housing causing slack in the chain and possibly jumping time. The tensioner's tension is also supported by oil pressure and not just a spring.

@mohammedrahmanrahman5024 3 года назад

thanks buddy

@Krusty_the_Clownfish 3 года назад

Great video mate, thanks!

@GetJobDoneofficial 3 года назад

Glad you liked it!

@wvsnwbrdr 3 года назад

Thank you very informative

@GetJobDoneofficial 3 года назад

Thanks, hope could help!

@mattrieck5719 3 года назад

Great Video !! What’s the torque specs on: 1. Balance Shaft retainer bolts & the balance shaft chain guides 2. Timing Chain guides 3. Cam bridge bolts 4. Crank Shaft Bolt I know you mentioned a few torque specs ...

@jonyhopkins1 2 года назад

Esq vous avez une idée sur l intervalle de remplacement de la chaîne de distrubition Do you have a idea about the échéance to chance the chain

@robertbowes1001 3 года назад

Hi I have a 2014 Audi A3 it’s a 1.8 tfsi and it’s got oil leak from the timing end crankshaft oil. Do you know if I was to take off the pulley will it still need timing up or would I be ok to whip off the pulley please.

@hilalkhan302 8 месяцев назад

HI, as a level 3 student i want to know do i have to timing the oil pump ? hope hear from you soon thanks

@w.m.5101 3 года назад

You using an impact wrench on the flywheel nut whitout holding the chain? You can see the flywheel slightly turning back. Thats a problem.

@wizardzx2 3 года назад

Can you do this with the engine still in the car? Removing engine mount and jacking up one side of the engine.

@GetJobDoneofficial 3 года назад

Yes, thats the way - you need engine support for it. I did it outside the car becase was fitting new engine in.

@TAF98 Год назад

Hi Mate, What's the part number for the timing chain kit/tensioner? (I have a 2015 Mk7 Golf R, DSG) Thanks!

@calistofox Год назад

hello. mate can you say me or give me an idea what is the price in average to this kind of job with all parts needed in a seat cupra or golf gti ? thanks.

@deeyaz9771 3 года назад

Hi mate I was wondering is it possible to replace the camshaft bridge bracket, without removing or timing the chain ?

@GetJobDoneofficial 3 года назад

yeh of course once top cover off remove the spool valve left hand thread. make sure top in top dead centre and remove it and replace it. look for old screen parts in the channels.

@sonukumar354 2 года назад

I have followed all steps and installed new chains as per the markings. However, the camshaft bridge is not going freely onto camshafts. But it came off easily while removing it. Any suggestions would you provide?

@sonukumar354 2 года назад

Spun the crankshaft few truns and the bridge slides easily. Thanks

@jellyd4889 7 месяцев назад

Thanks for the heads up!

@peter0139 2 года назад

hi why did you only replace the timing chain and not the balance shaft chain?

@RyanZa_myt 4 года назад

Hey there! It's been a few months. I wanted to know if the engine runs and if there were any issues or problems after the repair! I have a 2014 VW Jetta SE 1.8L with the EA888 (CODE: CPRA) that needs a timing chain/tensioner replacement.

@GetJobDoneofficial 4 года назад

No issue if there was issue would show at beginning. You can also go to obd check and check your timing position. I have another video how to do this.

@bestonthemarket6933 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GezsHFbuSxY.html this is when he starts engine.

@batchimed7392 2 года назад

My timing chain is making noise, so I want to measure the marks. Is it possible just to rotate tires to bring the marks on TDC? And if I over turn it, how can I make the chain rotate back? Might be a silly question, but I am a first timer. Also, I noticed you didn't change the lower chain in the back. Doesn't it require a replacement?

@WPM_in_ATL 2 года назад

You will observe there are three chains. The most critical of these is the one in the middle, which connects the two camshafts and the crankshaft. This is the one that if it "jumps" (loses time, or gear synchronization) severely damages the engine. _This is the one with the infamous tensioner._ The one in the back (closest to the block) drives the two balance shafts. One of the balance shafts runs to the rear of the engine and drives the water pump. It, too, should be replaced but it won't damage the engine immediately if it should "jump". If it is not synchronized perfectly, you might have vibrations...but it won't kill the motor. The one at the front drives the oil pump and there is no timing issue with that one.

@FloridaBikeSupplyOnline 2 года назад

The tape measurer 🤣🤣

@GetJobDoneofficial 2 года назад

Tape measure is a life saver ..

@mohammedrahmanrahman5024 2 года назад

old skool ways always the best lol

@mazpr2025 Год назад

Show a How To video with the engine installed, not pulled out. Like you are showing is cake, try to do the same job with cross members on the way and minimum space. Anyway, thanks buddy

@danielfappas9630 3 года назад

hello. can you please tell me the range in mm on timing marks? thanks

@GetJobDoneofficial 3 года назад

Please watch video should be 63mm from centre and 123 From mark to mark but double check in video I mention it real time

@GetJobDoneofficial 3 года назад

63 mm from centre and 123 from mark to mark but double check my video I mention it accurately

@shaqk6812 3 года назад

I have the same engine and want mine changed how much would you charge for a job like this

@GetJobDoneofficial 3 года назад

I don't take any jobs right now as we are in middle of some big projects, but you may get quotes around 1k+ from good Vag mechanic.

@UltraNsx25 3 года назад

does anyone know where to buy that specialty tool that he used?

@GetJobDoneofficial 3 года назад

Which one exactly?

@UltraNsx25 3 года назад

@@GetJobDoneofficialthanks for reply....I was talking about the set of tool that u were using to hold up sprocket so u won't lose the timing marks i was wondering where do get those tools? I have another question on this video the engine u were working on is that from an 2009 Audi a4 Quattro 2.0L tfsi ? Because I want to another every tfsi engine are the same. Thanks

@GetJobDoneofficial 3 года назад

@@UltraNsx25 The tool was from eBay ea888 timing chain kit, both eBay and Amazon got it. The engine is 2.0 TFSI of Audi A3 which is the same timing chain set up like in A4 TFSI since they both the same family of ea888 engines.

@UltraNsx25 3 года назад

@@GetJobDoneofficial thank u. Keep the good work

@TheDragonl91 3 года назад

Can you reuse the crank bolt?

@GetJobDoneofficial 3 года назад

Sure you can but would be best to replace

@aminkhan1292 Год назад

how much was the timing chain kit

@danibrani7103 3 года назад

man . where do you live ? I need to change mine and im a not confident , maybe you can help me

@GetJobDoneofficial 3 года назад

Lol what engine are you working on?

@danibrani7103 3 года назад

@@GetJobDoneofficial 1.8 tfsi , gen II

@GetJobDoneofficial 3 года назад

If you feel unsure. Best get it done professionally for your piece of mind and any warranty ..

@danibrani7103 3 года назад

@@GetJobDoneofficial ok , thanks anyway

@seanconnelly2832 3 года назад

Can you do this while the engine is in the car man ?

@johnwayne6561 3 года назад

it should be like this i dont know why the engine is out

@GetJobDoneofficial 3 года назад

If you have seen the video you would know why the engine has been out. Each time I swap / install new engine i do chain with it.

@seanconnelly2832 3 года назад

@@GetJobDoneofficial I did see the video just asking if I can avoid having to take the engine out and save myself more hassle is all

@GetJobDoneofficial 3 года назад

@@seanconnelly2832 Sure you can

@seanconnelly2832 3 года назад

@@GetJobDoneofficial awesome thanks man I’m doing it on my dads Audi TT. 2012 I looked at the engine and my mind was blown when I realised it’s the same engine as the 2.0 Tdci passat 🤯🤯 dad doesn’t like it when I tell him his car is a fancy version of a B6 passat 😂😂😂😂

@jsnleary 3 года назад

I hate to be negative... but it looked like the timing marks were way off from the start! That means that the chain slipped and there is probably valve damage. Also, why would you do that job with the spark plugs installed? At least verify TDC with something sticking out of cylinder #1. And why weren’t the new chain’s colored links matching up with the timing marks on the sprockets? I would be extremely surprised if that engine started and ran without damage.

@bestonthemarket6933 3 года назад

I think you aint got a clue cause the guy shows double and triple checking the timing when he puts it back in with the measuring tool. go see the rest of the series that he built the whole car driving it. you must be some amateur to stick something out of spark plug like a apprentice or something. on 17 mins 14 secs what looks out on sprocket. you heard the phrase you should have gone to spec savers.

@bestonthemarket6933 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GezsHFbuSxY.html this is when he starts engine.

@mohammedrahmanrahman5024 3 года назад

when he spun it 3 revolutions there was no noise either also the crank shaft pulley lined up to DTC, Plus the timing marks were with in range of 63 mm. great job get job done keep up the hard work.

@adri_20vt58 11 месяцев назад

@@bestonthemarket6933 the chains color is in the position only when you put the chains on for the first time after he can go again on the position maybe all 2000 engine rotation so its only for instalattion