Love the video. I dont understand why yal have these nice walk boards amd you dont use 2 and roll all the 2x2 in. Sheeting isn't for the Pros👍 They will never last as long as mine being sheeted💪
There's many ways to doing the hip roof the way I do it start at the top ice cream down one side straight at the bottom of that I go 90 degrees and I take that screen straight as an arrow and then I go back to the top I'll pull down and that's where the extra screen will pull all the way down to the bottom and then from that corner I'll go back to the end where the 90 finished there's other ways of doing it that's the way I do
Screen doesn’t shrink in the heat. If it’s fiberglass it expands in the heat much less than the aluminum frame so the frame pulls it apart. If it’s steel it also expands only half as fast as the aluminum frame. Same results don’t stretch it too tight.
picks come in different lenghts or you can get expandable wood ones ainters use. It's scary one slip and its no longer worth it. I have your problem but am waiting for help
what would you guys charge per square panel if I was only needing to replace about three different squares? One on top, one on the angle and one on the side.
do you just lay screen over the long supports and just spline the one side you can reach? Or do you also spline the supports running long ways away from you?
Our insurance adjuster told us it should NOT be sheeted. Each one needs to be splined. If a high wind or tree branch damaged one square, it would be less expensive to replace. Also hurricane winds would take the whole row OUT and you would have less protection until it’s rescreened. In our case after Hurricane Erma, it was 6 months.
@@IrishAnnie Honestly if you wanna save your cage from a hurricane or atleast try to, would be to cut the panels or pull the spline so wind can flow through the cage better bc the screen acts like a sail and will destroy the metal
Must cut in after sheeting!🤯 If you don't cut it in, when one panel on top fails they all fail in the same run. What I don't believe is that the guy did this when he knew he was on film.Why would you film yourself ripping people off? 🤦♀️🤦♀️🤦♀️🤦♀️(DOHHHHH) If you're in Central Florida you are better off just going with another company. I swear by Sunstate Screening. 🌞
Sheeting is cheating! . I hate when I show up to at job and I have to tell the customer that I have to replace The whole straight run bc the last guy sheeted it.
If you were a real pro you would be walking the roof not using walk beams!!!! Lmfao😁😂😀😂😂😂😂 I can do that entire roof and cut it in my self in 3 hours 4 hours max. No walkboards.. All i need is an 8ft ladder to get on the roof. The rest is history. These guys are rookies.
Yeah then you realise walking on beams isn't what it's cracked up to be and when u really think you're good you go back to a walk board because you realise it's faster ,safer, and your man hood isn't on the line
What’s it matter walk board or not the guy is making money 😂 I do both just depends on the job I have fell through a perlin and screws were rusted so walk board for the win
